DOI QR코드

DOI QR Code

Control Moment Gyroscope Torque Measurements Using a Kistler Table for Microsatellite Applications

  • Received : 2024.01.19
  • Accepted : 2024.02.13
  • Published : 2024.02.28

Abstract

Attitude control of a satellite is very important to ensure proper for mission performance. Satellites launched in the past had simple missions. However, recently, with the advancement of technology, the tasks to be performed have become more complex. One example relies on a new technology that allows satellites quickly alter their attitude while orbiting in space. Currently, one of the most widely used technologies for satellite attitude control is the reaction wheel. However, the amount of torque generated by reaction wheels is too low to facilitate quick maneuvers by the satellite. One way to overcome this is to implement posture control logic using a control moment gyroscope (CMG). Various types of CMGs have been applied to space systems, and CMGs are currently mounted on large-scale satellites. However, although technological advancements have continued, the market for CMGs applicable to, small satellites remains in its early stages. An ultra-small CMG was developed for use with small satellites weighing less than 200 kg. The ultra-small CMG measured its target performance outcomes using a precision torque-measuring device. The target performance of the CMG, at 800 mNm, was set through an analysis. The final torque of the CMG produced through the design after the analysis was 821mNm, meaning that a target tolerance level of 10% was achieved.

Keywords

Acknowledgement

This work was supported by the program of the CMG-based Small Satellite Agile Attitude Control Technology funded by the Hanwha Systems of Korea.

References

  1. Berner R, Control moment gyro actuator for small satellite applications, PhD Dissertation, University of Stellenbosch (2005).
  2. Shin GH, Yoon H, Kim H, Choi DS, Lee JS, et al., Highly agile actuator development status of an 800 mNm control moment gyro (CMG), J. Space Technol. Appl. 3, 322-332 (2023). https://doi.org/10.52912/jsta.2023.3.4.322
  3. Rhee SW, Kwon HJ, Low cost small CMG performance test and analysis, J. Korean Soc. Aeronaut. Space Sci. 39, 543-552 (2011). https://doi.org/10.5139/JKSAS.2011.39.6.543
  4. Defendini A, Lagadec K, Guay P, Blais T, Griseri G, Low cost CMG-based AOCS designs, Proceedings of the 4th ESA International Conference, Noordwijk, The Netherlands, 18-21 Oct 1999.
  5. Roser X, Sghedoni M, Control moment gyroscopes (CMG's) and their application in future scientific missions, Proceedings of the 3rd International Conference on Spacecraft Guidance, Navigation and Control Systems, Noordwijk, The Netherlands, 26-29 Nov 1996.
  6. Lappas VJ, Steyn WH, Underwood CI, Torque amplification of control moment gyros, Electron. Lett. 38, 837-839 (2002). https://doi.org/10.1049/el:20020590
  7. Lappas V, Steyn WH, Underwood C, Design and testing of a control moment gyroscope cluster for small satellites, J. Spacecr. Rockets. 42, 729-739 (2005). https://doi.org/10.2514/1.7308
  8. Hyungjoo Y, Current state of the satellite attitude maneuver technology using high-torque actuators, in Korean Society for Aeronautical and Space Sciences 2017 Spring Conference, Samcheok, Korea, 19-21 Apr 2017.
  9. Dominguez J, Wie B, Computation and visualization of control moment gyroscope singularities, in AIAA Guidance, Navigation, and Control Conference and Exhibit, Monterey, CA, 5-8 Aug 2002.
  10. Wie B, Singularity analysis and visualization for single-gimbal control moment gyro systems, J. Guid. Control Dyn. 27, 271-282 (2004). https://doi.org/10.2514/1.9167
  11. Kurokawa H, A geometric study of single gimbal control moment gyros: singularity problems and steering law, Report of Mechanical Engineering Laboratory, No. 175 (1998).