DOI QR코드

DOI QR Code

Damage identification of masonry arch bridge under blast loading using smoothed particle hydrodynamics (SPH) method

  • Amin Bagherzadeh Azar (Institute of Earthquake Engineering and Disaster Management, Istanbul Technical University, ITU Ayazaga Campus) ;
  • Ali Sari (Faculty of Civil Engineering, Istanbul Technical University, ITU Ayazaga Campus)
  • 투고 : 2024.02.19
  • 심사 : 2024.06.26
  • 발행 : 2024.07.10

초록

The smoothed particle hydrodynamics (SPH) method is a numerical technique used in dynamic analysis to simulate the fluid-like behavior of materials under extreme conditions, such as those encountered in explosions or high velocity impacts. In SPH, fluid or solid materials are discretized into particles. These particles interact with each other based on certain smoothing kernels, allowing the simulation of fluid flows and predict the response of solid materials to shock waves, like deformation, cracking or failure. One of the main advantages of SPH is its ability to simulate these phenomena without a fixed grid, making it particularly suitable for analyzing complex geometries. In this study, the structural damage to a masonry arch bridge subjected to blast loading was investigated. A high-fidelity micro-model was created and the explosives were modeled using the SPH approach. The Johnson-Holmquist II damage model and the Mohr-Coulomb material model were considered to evaluate the masonry and backfill properties. Consistent with the principles of the JH-II model, the authors developed a VUMAT code. The explosive charges (50 kg, 168 kg, 425 kg and 1000 kg) were placed in close proximity to the deck and pier of a bridge. The results showed that the 50 kg charges, which could have been placed near the pier by a terrorist, had only a limited effect on the piers. Instead, this charge caused a vertical displacement of the deck due to the confinement effect. Conversely, a 1000 kg TNT charge placed 100 cm above the deck caused significant damage to the bridge.

키워드

참고문헌

  1. Atakhani, M., Shekastehband, B. and Alaei, A.R. (2023), "Numerical analysis of suspension bridges with box girders subjected to detonations", J. Constr. Steel Res., 208, 107983. https://doi.org/10.1016/j.jcsr.2023.107983.
  2. Azar, A.B. and Sari, A. (2023), "Historical arch bridges-deterioration and restoration techniques", Civil Eng. J., 9(7), 1680-1696. https://doi.org/10.28991/CEJ-2023-09-07-010
  3. Bagherzadeh Azar, A. and Sari, A. (2024), "Structural failure of masonry arch bridges subjected to seismic action", Civil Eng. Infrastr. J., https://doi.org/10.22059/CEIJ.2024.366834.1975.
  4. Fakhimi, A. and Lanari, M. (2014), "DEM-SPH simulation of rock blasting", Comput. Geotech., 55, 158-164. https://doi.org/10.1016/j.compgeo.2013.08.008.
  5. Gingold, R.A. and Monaghan, J.J. (1977), "Smoothed particle hydrodynamics: theory and application to non-spherical stars", Month. Notic. Roy. Astron. Soc., 181(3), 375-389. https://doi.org/10.1093/mnras/181.3.375.
  6. Hajek, R., Hornikova, K. and Foglar, M. (2020), "Numerical assessment of the response of a heterogeneous concrete-based composite bridge deck to a near field explosion", Eng. Struct., 225, 111206. https://doi.org/10.1016/j.engstruct.2020.111206.
  7. Hallquist, J.O., Wainscott, B. and Schweizerhof, K. (1995), "Improved simulation of thin-sheet metalforming using LS-DyNA3D on parallel computers", J. Mater. Proc. Tech., 50(1-4), 144-157. https://doi.org/10.1016/0924-0136(94)01376-C.
  8. Hu, Y., Lu, W., Chen, M., Yan, P. and Zhang, Y. (2015), "Numerical simulation of the complete rock blasting response by SPH-DAM-FEM approach", Simul. Model. Pract. Theory, 56, 55-68. https://doi.org/10.1016/j.simpat.2015.04.001.
  9. Jafari, S.R. and Pasbani Khiavi, M. (2024), "Effect of the close-in underwater explosion pressure distribution on the concrete gravity dam", Innov. Infrastr. Solut., 9(6), 1-21. https://doi.org/10.1007/s41062-024-01548-9.
  10. JJu, A., Zhang, R., Cai, Y., Ling, J., Yang, J. and Su, C. (2022), "Study on characteristics and prediction model of jet impact concrete crushing based on SPH modeling", Struct., 44, 1523-1531. https://doi.org/10.1016/j.istruc.2022.08.065.
  11. Karmakar, S. and Shaw, A. (2021), "Response of R.C. plates under blast loading using FEM-SPH coupled method", Eng. Fail. Anal., 125, 105409. https://doi.org/10.1016/j.engfailanal.2021.105409.
  12. Li, Z., Hu, Y., Wang, G., Zhou, M., Hu, W., Zhang, X. and Gao, W. (2023), "Study on cyclic blasting failure characteristics and cumulative damage evolution law of tunnel rock mass under initial in-situ stress", Eng. Fail. Anal., 150, 107310. https://doi.org/10.1016/j.engfailanal.2023.107310.
  13. Liu, K., Li, Q., Wu, C., Li, X. and Li, J. (2018), "A study of cut blasting for one-step raise excavation based on numerical simulation and field blast tests", Int. J. Rock Mech. Min. Sci., 109, 91-104. https://doi.org/10.1016/j.ijrmms.2018.06.019.
  14. Ma, L.L., Wu, H. and Fang, Q. (2021), "Damage mode and dynamic response of RC girder bridge under explosions", Eng. Struct., 243, 112676. https://doi.org/10.1016/j.engstruct.2021.112676.
  15. Monaghan, J.J. (1992), "Smoothed particle hydrodynamics. In: Annual review of astronomy and astrophysics", 30(A93-25826 09-90), 543-574. https://doi.org/10.1146/annurev.aa.30.090192.002551
  16. Saha, S. and Karmakar, S. (2024), "Failure mode and response of a typical RC straight and skew highway girder bridge under the blast, wrapped with and without a non-Explosive reactive armour using FEM-SPH coupling", Eng. Fail. Anal., 161, 108330. https://doi.org/10.1016/j.engfailanal.2024.108330.
  17. Tang, E.K.C. and Hao, H. (2010), "Numerical simulation of a cable-stayed bridge response to blast loads, Part I: Model development and response calculations", Eng. Struct., 32(10), 3180-3192. https://doi.org/10.1016/j.engstruct.2010.06.007.
  18. Wang, W., Wang, Y., Yang, J., Wang, J. and Wang, X. (2022), "Investigation on air blast resistance of POZD-coated composite steel plates: Experiment and numerical analysis", Compos. Part B: Eng., 237, 109858. https://doi.org/10.1016/j.compositesb.2022.109858.
  19. Yazdani, M. and Habibi, H. (2023), "Residual capacity evaluation of masonry arch bridges by extended finite element method", Struct. Eng. Int., 33(1), 183-194. https://doi.org/10.1080/10168664.2021.1944454.
  20. Zhang, L., Wang, X., Ji, C., Wang, Y., Yang, G., Zhao, C. and Tao, C. (2023), "Effect of polyurea coating with different mechanical properties on blast resistance of aluminum alloy circular tube structures: Experiments vs numerical simulations", Thin Wall. Struct., 183, 110361. https://doi.org/10.1016/j.tws.2022.110361.
  21. Zhao, X., Wang, G., Lu, W., Yan, P., Chen, M. and Zhou, C. (2018), "Damage features of RC slabs subjected to air and underwater contact explosions", Ocean Eng., 147, 531-545. https://doi.org/10.1016/j.oceaneng.2017.11.007.