Acknowledgement
본 연구는 정부(과학기술정보통신부)의 재원으로 한국연구재단의 지원을 받아 수행된 연구임(NRF-2020R1A2C3012248).
References
- Ann, K.Y., Buenfeld, N.R. (2007). The effect of calcium nitrite on the chloride-induced corrosion of steel in concrete, Magazine of Concrete Research, 59(9), 689-697. https://doi.org/10.1680/macr.2007.59.9.689
- Ann, K.Y., Kim, T.S., Kim, J.H., Kim, S.H. (2010). The resistance of high alumina cement against corrosion of steel in concrete, Construction and Building Materials, 24(8), 1502-1510. https://doi.org/10.1016/j.conbuildmat.2010.01.022
- Ann, K.Y., Yang, H.J., Kim, H., Kim, J., Cho, W.J., Jung, H.S. (2021). Steel corrosion in calcium aluminate cement mortar against chloride, ACI Materials Journal, 118(1), 31-39. https://doi.org/10.14359/51728279
- Argiz, C., Sanjuan, M.A., Borges, P.C., Alvarez, E. (2018). Modeling of corrosion rate and resistivity of steel reinforcement of calcium aluminate cement mortar, Advances in Civil Engineering, 2018, 1096282.
- Arya, C. (1997). Calcium Aluminate Cements in Construction - a reassessment, Concrete Society Technical Report, 46.
- ASTM International, ASTM C 1218 (2020). Standard Test Method for Water-Soluble Chloride in Mortar and Concrete, United States.
- Fu, Y., Ding, J. (1996). Corrosion protection of reinforcement in modified high-alumina cement concrete, ACI Materials Journal, 93(6), 609-612. https://doi.org/10.14359/9867
- Gillott, J.E., Quinn, T. (2003). Strength and sulfate resistance of concrete made with high alumina cement, type 10 Portland cement, type 10 Portland cement plus fly ash and type 50 Portland cement, Cement, Concrete, and Aggregates, 25(1), 21-27. https://doi.org/10.1520/CCA10517J
- Glass, G.K., Buenfeld, N.R. (2000). The influence of chloride binding on the chloride induced corrosion risk in reinforced concrete, Corrosion Science, 42(2), 329-344. https://doi.org/10.1016/S0010-938X(99)00083-9
- Jin, S.H., Yang, H.J., Hwang, J.P., Ann, K.Y. (2016). Corrosion behaviour of steel in CAC-mixed concrete containing different concentrations of chloride, Construction and Building Materials, 110, 227-234. https://doi.org/10.1016/j.conbuildmat.2016.02.032
- Jung, M.S., Shin, M.C., Ann, K.Y. (2012). Fingerprinting of a concrete mix proportion using the acid neutralisation capacity of concrete matrices, Construction and Building Materials, 26(1), 65-71. https://doi.org/10.1016/j.conbuildmat.2011.05.003
- Kim, D.G., Lee, H.J., Ann, K.Y. (2011). Semi-quantitative prediction of the corrosion risk of steel in concrete using XRD analysis, Journal of Advanced Concrete Technology, 9(3), 231-239. https://doi.org/10.3151/jact.9.231
- Macias, A., Kindness, A., Glasser, F.P. (1996). Corrosion behaviour of steel in high alumina cement mortar cured at 5, 25 and 55 ℃: chemical and physical factors, Journal of Materials Science, 31, 2279-2289. https://doi.org/10.1007/BF01152936
- Neville, A.M. (1995). Properties of Concrete, Third Ed, London, Longman.
- Sanjuan, M.A. (2000). Overview on electrochemical parameters to assess the corrosion state of steel reinforcement in CAC mortar and concrete, Journal of Materials Science, 35(1), 105-108. https://doi.org/10.1023/A:1004748801193
- Scrivener, K.L., Cabiron, J.L., Letourneux, R. (1999). High-performance concretes from calcium aluminate cements, Cement and Concrete Research, 29(8), 1215-1223. https://doi.org/10.1016/S0008-8846(99)00103-9
- Scrivener, K.L., Capmas, A. (2004). Calcium Aluminate Cement In: P. Hewlett, M. Liska (Eds.) Lea's Chemistry of Cement and Concrete, Elsevier, Cambridge, MA, 1066.
- Song, H.W., Lee, C.H., Jung, M.S., Ann, K.Y. (2008). Development of chloride binding capacity in cement pastes and influence of the pH of hydration products, Canadian Journal of Civil Engineering, 35(12), 1427-1434. https://doi.org/10.1139/L08-089