Acknowledgement
본 연구는 과학기술정보통신부의 거대과학연구개발사업인 '스페이스파이오니어사업'에 의해 수행됨(No.2021M1A3B9096764). 또한 이 연구는 2023 년도 정부(교육부)의 재원으로 한국연구재단의 지원을 받아 수행된 기초연구사업임(No.2022R1A6A1A03056784, No. 2022R1F1A1069025).
References
- J. S. Choi, H. I. Huh, and W. K. Ki, "Technology and Development Trends of Small Launch Vehicles," Journal of the Korean Society of Propulsion Engineers, vol. 24, no. 5, pp. 91-102, September 2020. https://doi.org/10.6108/KSPE.2020.24.5.091
- Y. P. Singh, H. Singh, P. K. Sahu, and R. Muthukumar, "Common bulkhead tank design for cryogenic stage of an Indian launch vehicle," Defence Science Journal, vol. 72, no. 1, pp. 3-9, January 2022. https://doi.org/10.14429/dsj.72.17239
- C. M. Lee, C. H. Sim, and J. S. Park," Thermal Insulation Performance Comparison Using Boil-Off Mass and Boil- Off Rate for Common Bulkhead Structures of Space Launch Vehicles," Journal of The Korean Society for Aeronautical and Space Sciences, vol.51, no. 4, pp. 227-234, April 2023.
- F. Barato, "Challenges of Ablatively Cooled Hybrid Rockets for Satellites or Upper Stages," Aerospace, vol. 8, no. 7, pp. 190, May 2021.
- N. K. Cho, D. B. Seo, B. I. Yoo, S. H. Kim, and Y. M. Han, "Investigation on Chilling Procedure for LOX Supply System for Liquid Rocket Engine," Journal of the Korean Society of Propulsion Engineers, vol. 23, no. 3, pp. 119-126, May 2019. https://doi.org/10.6108/KSPE.2019.23.3.119
- Korea Aerospace Research Institute, "Common Bulkhead Propellant Tank Development Specification," SPPO-SPLV1-001, Ver. B, 2022.
- B. Szelinski, H. Lange, C. Rottger, H. Sacher, S. Weiland, and D. Zell, "Development of an innovative sandwich common bulkhead for cryogenic upper stage propellant tank," Acta Astronautica, vol. 81, no. 1, pp. 200-213, June 2012. https://doi.org/10.1016/j.actaastro.2012.06.025
- Z. Q. Li, B. H. Nan, T. F. He, and G. X. Feng, "Study of bonding technology and property of foam-sandwich cobulkhead of cryogenic tank on launch vehicle," Materials Science Forum, vol. 817, pp. 639-644, May 2015.
- S. S umith, a nd R . R amesh K umar, "Thermo-structural analysis of cryogenic tanks with common bulkhead configuration," Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, vol. 236, no. 5, pp. 900-909, June 2021.
- D. K. Choi, J. W. Choi, S. Y. Lee, and J. H. Roh, "A Study on Thermal-Structural Analysis of Common Bulkhead Propellant Tanks Using a Two-Dimensional Axisymmetric Numerical Model," Proceeding of The Korean Society for Aeronautical and Space Sciences Fall Conference, pp. 83-84, November 2021.
- The Engineering ToolBox, https://www.engineeringtoolbox.com/
- NIST Chemistry WebBook, https://webbook.nist.gov/chemistry/
- S. M. Tak, J. W. Park, M. K. Kang, D. J. Park, J. S. Lee, and S. S. Lee, "Transient heat transfer analysis of inertial measurement devices by outside frictional heat," Journal of Aerospace System Engineering, vol. 4, no. 1, pp. 32-37, March 2010.