DOI QR코드

DOI QR Code

A Review of Physical Properties of Cement-Free Precast Concrete Using Industrial By-Products

산업부산물을 적용한 무 시멘트 프리캐스트 콘크리트의 물리적 특성 검토

  • Jung, Young-Woong (School of Architecture, Kyungpook National University) ;
  • Yun, Ja-Yeon (School of Architecture, Kyungpook National University) ;
  • Shin, Kyung-Su (Department of Architecture Engineering, Woosong University) ;
  • Lee, Taegyu (Department of Fire and Disaster Prevention, Semyung University) ;
  • Choi, Hyeonggil (School of Architecture, Kyungpook National University)
  • Received : 2024.03.05
  • Accepted : 2024.04.11
  • Published : 2024.06.20

Abstract

This research investigated the feasibility of incorporating industrial by-products into precast concrete formulated with blast furnace slag and natural gypsum. Specifically, the study examined the effects of incorporating steelmaking slag(STS slag), combined heat power plant fly ash, and return dust. The optimal amount of these by-products was determined by measuring air content, slump, and compressive strength at various incorporation levels. Results demonstrated that compressive strength was enhanced across all levels of by-product addition. Notably, incorporating 10% of the by-products led to exceptional early-age strength development. However, a 20% addition of combined heat power plant ash significantly reduced the slump value by approximately 40%. Considering these findings and the requirement for rapid strength development in precast concrete applications, a 10% incorporation of industrial by-products was deemed optimal due to its ability to accelerate early-age strength gain.

본 연구는 산업부산물인 STS슬래그, 열병합애시, 리턴더스트를 고로슬래그와 천연석고를 기반으로 한 프리캐스트 콘크리트에 적용하였을 때 미치는 영향에 대해 검토하였다. 본 연구의 범위에서 산업부산물의 사용량에 따른 공기량, 슬럼프, 압축강도를 측정하여 실험에 사용된 산업부산물들의 최적의 사용량을 추정하였다. 압축강도는 산업부산물들의 사용량에 관계없이 모두 우수한 결과를 보였으며, 특히 산업부산물들의 사용량 10% 범위에서 초기재령의 강도발현이 우수한 것으로 나타났다. 이는 XRD 및 SEM 분석을 통하여 산업부산물들이 프리캐스트 콘크리트의 제작과정인 증기양생을 거치며 콘크리트 강도에 영향을 미치는 수화생성물들을 보다 효율적으로 생성하였기 때문인 것으로 판단된다. 다만, 빠르게 강도를 발현해야하는 프리캐스트 콘크리트의 특성과 작업성 등을 고려한다면, 초기 재령에 강도가 빠르게 발현되는 산업부산물들의 사용량 10% 전후가 적정 사용량으로 판단된다.

Keywords

Acknowledgement

This research was funded by the Korea Agency for Infrastructure Technology Advencement(KAIA) grant funded by the Korean government(MOLIT)(grant number RS-KA162704) and the National Research Foundation of Korea(NRF) grant funded by the Korea government(MSIT)(NRF-2021R1C1C1011347).

References

  1. Jeong YS, Cho SH, Moon SH, Ji CY. Scenario to reduce greenhouse gas emissions in building sector towards the goal of carbon neutrality by 2050. Journal of the Architectural Institute of Korea. 2021 Oct;37(10):189-97. https://doi.org/10.5659/JAIK.2021.37.10.189
  2. 2050 Carbon neutral strategy of the republic of korea towards a sustainable and green society [Internet]. Seoul(Korea): The Government of the Republic of Korea. 2020. Available from: https://unfccc.int/documents/267683
  3. Cheng CC, Pouffary S, Svenningsen N, Callaway JM. The kyoto protocol, the clean development mechanism and the building and construction sector: A reprot for the UNEP sustainable buildings and construction initiative. Paris (France): United Nations Environment Programme; 2008. 82
  4. Cho JW. CO2 Reduction Cement Technologies. Magazine of the Korea Concrete Institute. 2011 Nov;23(6):32-5. https://doi.org/10.22636/MKCI.2011.23.6.32
  5. Kang SH, Ahn HJ, Lee CS, Lee D, Cho H, Kang KI. Assessment of CO2 emissions of eco-friendly lightweight form in the construction process. Proceedings of the Korean Institute of Building Construction Conference. 2018 Nov 15-16; Seoul, Korea. Seoul (Korea): The Korean Institute of Building Construction.2018. p. 10-1.
  6. Jung YW, Shin KS, Choi HG. Physical properties review of cement-free precast concrete using combined heat power plant ash. Proceedings of the Korea Concrete Institute. 2023 Nov 1-3; Jeju, Korea. Seoul (Korea): the Korea Concrete Institute. 2023. p. 595-6.
  7. Nam HK, Lim JG, Lee SS. Engineering properties of the non-cement mortar using the fly ash from combined heat power plant and recycled fine aggregate. Journal of the Korea Institute of Building Construction. https://doi.org/10.5345/JKIBC.2015.15.6.553
  8. Kim TH, Jang SY, Kwon SJ. Durability characteristics in concrete with ternary blended concrete and low fineness GGBFS. Journal of the Korean Recycled Construction Resources Institute. 2019 Dec;7(4):287-94. https://doi.org/10.14190/JRCR.2019.7.4.287
  9. Cho BS. Study on stable use of stainless eaf oxidizing slag as fine aggregate of concrete. Journal of the Korea Institute for Structural Maintenance and Inspection. https://doi.org/10.11112/jksmi.2014.18.3.133
  10. Choi SW, Kim JS, Jeun JY, Kim EK, Ryu DH. The Experimental study on the properties on concrete to use the electric arc furnance slag as fine aggregate. Proceedings of the Korea Concrete Institute Conference. 2008 Nov. p. 389-92.
  11. Hwang CS, Park KT, Choi YC. Pore characteristics of stainless steel slag AOD blended cement pastes by carbonation curing. Journal of the Korea Institute for Structural Maintenance and Inspection. 2018 Apr;22(3):90-6. https://doi.org/10.11112/jksmi.2018.22.3.090
  12. Lee SS, Back MJ, Won C, Ahn JH, Park CL. The quality properties for fly ash of combined heat power plant and mechananical properties in concrete. Proceedings of the Korea Concrete Institute Conference. Journal of the Korea Concrete Institute. 1995 Sep. p. 69-74.
  13. Min KN, Lee JW, Lee DW, Kim JH, Jung CM. Analysis of physical and chemical properties of CFBC fly ash in vietnam for solidification. The Journal of Engineering Geology. 2017 Mar;27(3):245-53. https://doi.org/10.9720/kseg.2017.3.245
  14. Hong SH, Yuan TF, Choi JS, Yoon YS. Evaluating microstructure and self-sensing properties of high-strength concrete with electric-arc-furnace oxidizing slag. Journal of the Korean Society of Hazard Mitigation. 2019 Oct;19(5):189-97. https://doi.org/10.9798/KOSHAM.2019.19.5.189
  15. Mun KJ, Lee CW, So SY, Soh, YS. Hydration reaction of non-sintering cement using inorganic industrial waste as activator. Journal of the Korea Concrete Institute. 2006 Apr;18(2):267-74. https://doi.org/10.4334/JKCI.2006.18.2.267