DOI QR코드

DOI QR Code

Physical and electrical properties of PLA-carbon composites

  • Kang Z. Khor (Faculty of Chemical Engineering and Technology, Universiti Malaysia Perlis (UniMAP)) ;
  • Cheow K. Yeoh (Faculty of Chemical Engineering and Technology, Universiti Malaysia Perlis (UniMAP)) ;
  • Pei L. Teh (Faculty of Chemical Engineering and Technology, Universiti Malaysia Perlis (UniMAP)) ;
  • Thangarajan Mathanesh (Faculty of Chemical Engineering and Technology, Universiti Malaysia Perlis (UniMAP)) ;
  • Wee C. Wong (Eco Power Synergy Sdn Bhd, Bandar Puchong Jaya)
  • 투고 : 2023.08.14
  • 심사 : 2024.01.05
  • 발행 : 2024.06.25

초록

Polylactic acid or polylactide (PLA) is a biodegradable thermoplastic that can be produced from renewable material to create various components for industrial purposes. In 3D printing technology, PLA is used due to its good mechanical, electrical, printing properties, environmentally friendly and non-toxic properties. However, the physical properties and excellent electrical insulation properties of PLA have limited its application. In this study, with the carbon black (CB) as filler added into PLA, the lattice spacing and morphology were investigated by using X-ray diffraction (XRD) and scanning electron microscope (SEM), respectively. The physical properties of PLA-carbon composite were evaluated by using tensile test, shore D hardness test and density and voids measurement. Impedance test was conducted to investigate the electrical properties of PLA-Carbon composites. The results demonstrate that the inclusion of carbon black as filler enhances the physical properties of the PLA-carbon composites, including tensile properties, hardness, and density. The addition of carbon black also leads to improved electrical conductivity of the composites. Better enhancement toward the electrical properties of PLA-carbon composites is observed with 1wt% of carbon black in N774 grade. The N550 grade with 2wt% of carbon black shows better improvement in the physical properties of PLA-carbon composites, achieving 10.686 MPa in tensile testing, 43.330 in shore D hardness test, and a density of 1.200 g/cm3 in density measurement. The findings suggest that PLA-carbon composites have the potential for enhanced performance in various industrial applications, particularly in sectors requiring improved physical and electrical properties.

키워드

과제정보

The author wishes to acknowledge Eco Power Synergy Sdn. Bhd. Mr Chang Chin Fooi, Dato' Dr Yew Chong Hooi, Dr Wong Wee Chun and Dr Suhaila Halim, which provided carbon black used for this thesis and Universiti Malaysia Perlis (UniMAP), especially the Faculty of Chemical Engineering Technology and the Centre of Excellence (FrontMATE), for providing the laboratory and testing facilities.

참고문헌

  1. Ansari, A.A. and Kamil, M. (2022), "Izod impact and hardness properties of 3D printed lightweight CF-reinforced PLA composites using design of experiment", Int. J. Lightw. Mater. Manuf., 5(3), 369-383. https://doi.org/10.1016/j.ijlmm.2022.04.006.
  2. Ceregatti, T., Pecharki, P., Pachekoski, W.M., Becker, D. and Dalmolin, C. (2017), "Electrical and thermal properties of PLA/CNT composite films", Mater., 22(3), e11863. https://doi.org/10.1590/s1517-707620170003.0197.
  3. Chakraborty, G., Dhar, P., Katiyar, V. and Pugazhenthi, G. (2020), "Applicability of Fe-CNC/GR/PLA composite as potential sensor for biomolecules", J. Mater. Sci.: Mater. Electron., 31(8), 5984-5999. https://doi.org/10.1007/s10854-020-03036-z.
  4. Elkolali, M., Nogueira, L.P., Ronning, P.O. and Alcocer, A. (2022), "Void content determination of carbon fiber reinforced polymers: A comparison between destructive and non-destructive methods", Polym., 14(6), 1212. https://doi.org/10.3390/polym14061212.
  5. Espinel-Rubio, G.A. and Feo-Ardila, D. (2022), "The effect of carbon black on the curing and mechanical properties of natural rubber/ acrylonitrile- butadiene rubber composites", J. Appl. Res. Technol., 30(1), 40-68. https://doi.org/10.14482/indes.30.1.303.661.
  6. Guo, J., Tsou, C.H., Yu, Y., Wu, C.S., Zhang, X., Chen, Z., Yang, T., Ge, F., Liu, P. and Guzman, M.R.De. (2021), "Conductivity and mechanical properties of carbon black-reinforced poly (lactic acid) (PLA/CB) composites", Iran. Poly. J., 30(12), 1251-1262. https://doi.org/10.1007/s13726-021-00973-2. 
  7. Hasanzadeh, R., Mihankhah, P., Azdast, T., Aghaiee, S. and Park, C.B. (2023), "Optimization of process parameters of fused filament fabrication of polylactic acid composites reinforced by aluminum using Taguchi Approach", Metals, 13(6), 1013. https://doi.org/10.3390/met13061013.
  8. Kubow, K. (2019), "Basic image processing with FIJI/ImageJ", James Madison University, Harrisonburg, VA, USA.
  9. Lee, C.Y. and Liu, C.Y. (2019), "The influence of forced-air cooling on a 3D printed PLA part manufactured by fused filament fabrication", Addit. Manuf., 25, 196-203. https://doi.org/10.1016/j.addma.2018.11.012.
  10. Lee, S.M., Lee, S.H. and Roh, J.S. (2021), "Analysis of activation process of carbon black based on structural parameters obtained by XRD analysis", Crystals, 11(2), 153. https://doi.org/10.3390/cryst11020153.
  11. Lim, S.W., Choi, M.C., Jeong, J.H., Park, E.Y. and Ha, C.S. (2018), "Systematic studies on the properties of poly(lactic acid) (PLA)/liquid polybutadiene rubber (LPB) reactive blends", Adv. Mater. Res., 7(2), 149-162. https://doi.org/10.12989/amr.2018.7.2.149.
  12. Macias-Garcia, A., Diaz-Diez, M.A., Alfaro-Dominguez, M. and Carrasco-Amador, J.P. (2020), "Influence of chemical composition, porosity and fractal dimension on the electrical conductivity of carbon blacks", Heliyon, 6(6), e04024. https://doi.org/10.1016/j.heliyon.2020.e04024.
  13. Nanaki, S., Barmpalexis, P., Iatrou, A., Christodoulou, E., Kostoglou, M. and Bikiaris, D. (2018), "Risperidone controlled release microspheres based on poly(lactic acid)-poly(propylene adipate) novel polymer blends appropriate for long acting injectable formulations", Pharm., 10(3), 130. https://doi.org/10.3390/pharmaceutics10030130.
  14. Phua, J.L., Teh, P.L., Ghani, S.A. and Yeoh, C.K. (2016), "Comparison study of carbon black (CB) used as conductive filler in epoxy and polymethylmethacrylate (PMMA)", J. Poly. Eng., 36(4), 391-398. https://doi.org/10.1515/polyeng-2015-0026.
  15. Rahmalina, D., Irwanto, J., Sukma, H., Setiawan, I.C. and Suhadi, A. (2019), "Effect of 5-15% carbon black reinforcement on mechanical properties and resistivity of polyurethane composites", IOP Conf. Ser.: Mater. Sci. Eng., 547(1), 012057. https://doi.org/10.1088/1757-899X/547/1/012057.
  16. Savetlana, S., Sukmana, I. and Saputra, F.A. (2017), "The effect of carbon black loading and structure on tensile property of natural rubber composite", IOP Conf. Ser.: Mater. Sci. Eng., 223, 012009. https://doi.org/10.1088/1757-899X/223/1/012009.
  17. Suresha, B., Hanamasagar, V. and Anand, A. (2022), "Processing and tribological behaviour of carbon fiber reinforced polylactic acid composites", IOP Conf. Ser.: Mater. Sci. Eng., 1272(1), 012022. https://doi.org/10.1088/1757-899X/1272/1/012022.
  18. Yeoh, C.K., Cheah, C.S., Pushpanathan, R., Song, C.C., Tan, M.A. and Teh, P.L. (2020), "Effect of infill pattern on mechanical properties of 3D printed PLA and cPLA", IOP Conf. Ser.: Mater. Sci. Eng., 957, 012064. https://doi.org/10.1088/1757-899X/957/1/012064.