Coupled systems mechanics

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Mechanical behavior of composite beam aluminum-sandwich honeycomb strengthened by imperfect FGM plate under thermo-mechanical loading

  • Bensatallah Tayeb (Laboratory of Geomatics and Sustainable Development, University of Tiaret) ;
  • Rabahi Abderezak (Laboratory of Geomatics and Sustainable Development, University of Tiaret) ;
  • Tahar Hassaine Daouadji (Laboratory of Geomatics and Sustainable Development, University of Tiaret)
  • Received : 2023.12.19
  • Accepted : 2024.02.09
  • Published : 2024.04.25
⟨ Previous Next ⟩

Abstract

In this paper, an improved theoretical interfacial stress analysis is presented for simply supported composite aluminum- sandwich honeycomb beam strengthened by imperfect FGM plateusing linear elastic theory. The adherend shear deformations have been included in the present theoretical analyses by assuming a linear shear stress through the thickness of the adherends, while all existing solutions neglect this effect. Remarkable effect of shear deformations of adherends has been noted in the results.It is shown that both the sliding and the shear stress at the interface are influenced by the material and geometry parameters of the composite beam. This new solution is intended for applicationto composite beams made of all kinds of materials bonded with a thin plate. Finally, numerical comparisons between the existing solutions and the present new solution enable a clear appreciation of the effects of various parameters.

Keywords

Acknowledgement

This research was supported by the Algerian Ministry of Higher Education and Scientific Research (MESRS) as part of the grant for the PRFU research project n° A01L02UN140120200002and by the University of Tiaret, in Algeria.

References

  1. Abderezak, R., Daouadji, T.H. and Rabia, B. (2020), "Analysis of interfacial stresses of the reinforced concrete foundation beams repairing with composite materials plate", Couple. Syst. Mech., 9(5), 473. http://doi.org/10.12989/csm.2020.9.5.473.
  2. Abderezak, R., Daouadji, T.H. and Rabia, B. (2021), "Aluminum beam reinforced by externally bonded composite materials", Adv. Mater. Res., 10(1), 23. http://doi.org/10.12989/amr.2021.10.1.023.
  3. Abderezak, R., Daouadji, T.H. and Rabia, B. (2021), "Fiber reinforced polymer in civil engineering: Shear lag effect on damaged RC cantilever beams bonded by prestressed plate", Couple. Syst. Mech., 10(4), 299-316. http://doi.org/10.12989/csm.2021.10.4.299.
  4. Abderezak, R., Daouadji, T.H. and Rabia, B. (2021), "Modeling and analysis of the imperfect FGM-damaged RC hybrid beams", Adv. Comput. Des., 6(2), 117. http://doi.org/10.12989/acd.2021.6.2.117.
  5. Abderezak, R., Daouadji, T.H. and Rabia, B. (2021), "New solution for damaged porous RC cantilever beams strengthening by composite plate", Adv. Mater. Res., 10(3), 169. http://doi.org/10.12989/amr.2021.10.3.169.
  6. Abderezak, R., Daouadji, T.H. and Rabia, B. (2022), "Analysis and modeling of hyperstatic RC beam bonded by composite plate symmetrically loaded and supported", Steel Compos. Struct., 45(4), 591-603. https://doi.org/10.12989/scs.2022.45.4.591.
  7. Abderezak, R., Daouadji, T.H. and Tayeb, B. (2023), "Composite aluminum-slab RC beam bonded by a prestressed hybrid carbon-glass composite material", Struct. Eng. Mech., 85(5), 573. https://doi.org/10.12989/sem.2023.85.5.573.
  8. Abderezak, R., Rabia, B. and Daouadji, T.H. (2022), "Rehabilitation of RC structural elements: Application for continuous beams bonded by composite plate under a prestressing force", Adv. Mater. Res., 11(2), 91-109. https://doi.org/10.12989/amr.2022.11.2.091.
  9. Addou, F.Y., Bourada, F., Meradjah, M., Bousahla, A.A., Tounsi, A., Ghazwani, M.H. and Alnujaie, A. (2023), "Impact of porosity distribution on static behavior of functionally graded plates using a simple quasi-3D HSDT", Comput. Concrete, 32(1), 87-97. https://doi.org/10.12989/cac.2023.32.1.087.
  10. Aissa, B., Rabia, B. and Tahar, H.D. (2023), "Predicting and analysis of interfacial stress distribution in RC beams strengthened with composite sheet using artificial neural network", Struct. Eng. Mech., 87(6), 517-527. https://doi.org/10.12989/sem.2023.87.6.517.
  11. Al-Furjan, M.S.H., Habibi, M., Ghabussi, A., Safarpour, H., Safarpour, M. and Tounsi, A. (2021), "Nonpolynomial framework for stress and strain response of the FG-GPLRC disk using three-dimensional refined higher-order theory", Eng. Struct., 228, 111496. https://doi.org/10.1016/j.engstruct.2020.111496.
  12. Al-Osta, M.A., Saidi, H., Tounsi, A., Al-Dulaijan, S.U., Al-Zahrani, M.M., Sharif, A. and Tounsi, A. (2021), "Influence of porosity on the hygro-thermo-mechanical bending response of an AFG ceramic-metal plates using an integral plate model", Smart Struct. Syst., 28(4), 499-513. http://doi.org/10.12989/sss.2021.28.4.499.
  13. Alsubaie, A.M., Alfaqih, I., Al-Osta, M.A., Tounsi, A., Chikh, A., Mudhaffar, I.M. and Tahir, S. (2023), "Porosity-dependent vibration investigation of functionally graded carbon nanotube-reinforced composite beam", Comput. Concrete, 32(1), 75-85. https://doi.org/10.12989/cac.2023.32.1.075.
  14. Belabed, Z., Tounsi, A., Al-Osta, M.A., Tounsi, A. and Minh, H.L. (2024), "On the elastic stability and free vibration responses of functionally graded porous beams resting on Winkler-Pasternak foundations via finite element computation", Geomech. Eng., 36(2), 183-204. https://doi.org/10.12989/gae.2024.36.2.183.
  15. Benachour, A., Benyoucef, S. and Tounsi, A. (2008), "Interfacial stress analysis of steel beams reinforced with bonded prestressed FRP plate", Eng. Struct., 30(11), 3305-3315. https://doi.org/10.1016/j.engstruct.2008.05.007.
  16. Bentrar, H., Chorfi, S.M., Belalia, S.A., Tounsi, A., Ghazwani, M.H. and Alnujaie, A. (2023), "Effect of porosity distribution on free vibration of functionally graded sandwich plate using the P-version of the finite element method", Struct. Eng. Mech., 88(6), 551. https://doi.org/10.12989/sem.2023.88.6.551.
  17. Bentrar, H., Chorfi, S.M., Belalia, S.A., Tounsi, A., Ghazwani, M.H. and Alnujaie, A. (2023), "Effect of porosity distribution on free vibration of functionally graded sandwich plate using the P-version of the finite element method", Struct. Eng. Mech., 88(6), 551. https://doi.org/10.12989/sem.2023.88.6.551.
  18. Bouakaz, K., Daouadji, T.H., Meftah, S.A., Ameur, M., Tounsi, A. and Bedia, E.A. (2014), "A numerical analysis of steel beams strengthened with composite materials", Mech. Compos. Mater., 50, 491-500. https://doi.org/10.1007/s11029-014-9435-x.
  19. Bouazaoui, L., Perrenot, G., Delmas, Y. and Li, A. (2007), "Experimental study of bonded steel concrete composite structures", J. Constr. Steel Res., 63(9), 1268-1278. http://doi.org/10.1016/j.jcsr.2006.11.002.
  20. Bourada, F., Bousahla, A.A., Tounsi, A., Tounsi, A., Tahir, S.I., Al-Osta, M.A. and Do-Van, T. (2023), "An integral quasi-3D computational model for the hygro-thermal wave propagation of imperfect FGM sandwich plates", Comput. Concrete, 32(1), 61-74. https://doi.org/10.12989/cac.2023.32.1.061.
  21. Bouzid, H., Rabia, B. and Daouadji, T.H. (2022), "Curvature ductility of confined HSC columns", International Conference on Innovative Solutions in Hydropower Engineering and Civil Engineering, Singapore, September. https://doi.org/10.1007/978-981-99-1748-8_21.
  22. Bouzid, H., Rabia, B. and Daouadji, T.H. (2023), "Ultimate behavior of RC beams strengthened in flexure using FRP material", Eng. Struct., 289, 116300. https://doi.org/10.1016/j.engstruct.2023.116300.
  23. Cuong-Le, T., Nguyen, K.D., Le-Minh, H., Phan-Vu, P., Nguyen-Trong, P. and Tounsi, A. (2022), "Nonlinear bending analysis of porous sigmoid FGM nanoplate via IGA and nonlocal strain gradient theory", Adv. Nano Res., 12(5), 441. https://doi.org/10.12989/anr.2022.12.5.441.
  24. Daouadji, T.H. (2013), "Analytical analysis of the interfacial stress in damaged reinforced concrete beams strengthened by bonded composite plates", Strength Mater., 45(5), 587-597. https://doi.org/10.1007/s11223-013-9496-4.
  25. Daouadji, T.H. (2017), "Analytical and numerical modeling of interfacial stresses in beams bonded with a thin plate", Adv. Comput. Des., 2(1), 57-69. https://doi.org/10.12989/acd.2017.2.1.057.
  26. Daouadji, T.H., Abderezak, R. and Rabia, B. (2022), "New technique for repairing circular steel beams by FRP plate", Adv. Mater. Res., 11(3), 171-190. https://doi.org/10.12989/amr.2022.11.3.171.
  27. Draiche, K., Bousahla, A.A., Tounsi, A., Alwabli, A.S., Tounsi, A. and Mahmoud, S.R. (2019), "Static analysis of laminated reinforced composite plates using a simple first-order shear deformation theory", Comput. Concrete, 24(4), 369-378. https://doi.org/10.12989/cac.2019.24.4.369.
  28. Garg, A., Gupta, S., Chalak, H.D., Belarbi, M.O., Tounsi, A., Li, L. and Zenkour, A.M. (2023), "Free vibration analysis of power-law and sigmoidal sandwich FG plates using refined zigzag theory", Adv. Mater. Res., 12(1), 43. https://doi.org/10.12989/amr.2023.12.1.043.
  29. Hamrat, M., Bouziadi, F., Boulekbache, B., Daouadji, T.H., Chergui, S., Labed, A. and Amziane, S. (2020), "Experimental and numerical investigation on the deflection behavior of pre-cracked and repaired reinforced concrete beams with fiber-reinforced polymer", Constr. Build. Mater., 249, 118745. http://doi.org/10.1016/j.conbuildmat.2020.118745.
  30. Henni, M.A.B., Abbes, B., Daouadji, T.H., Abbes, F. and Adim, B. (2021), "Numerical modeling of hygrothermal effect on the dynamic behavior of hybrid composite plates", Steel Compos. Struct., 39(6), 751-763. http://doi.org/10.12989/scs.2021.39.6.751.
  31. Kablia, A., Benferhat, R., Daouadji, T.H. and Abderezak, R. (2023), "Free vibration of various types of FGP sandwich plates with variation in porosity distribution", Struct. Eng. Mech., 85(1), 1-14. https://doi.org/10.12989/sem.2023.85.1.001.
  32. Kaddari, M., Kaci, A., Bousahla, A.A., Tounsi, A., Bourada, F., Bedia, E.A. and Al-Osta, M.A. (2020), "A study on the structural behaviour of functionally graded porous plates on elastic foundation using a new quasi-3D model: Bending and free vibration analysis", Comput. Concrete, 25(1), 37-57. https://doi.org/10.12989/cac.2020.25.1.037.
  33. Katiyar, V., Gupta, A. and Tounsi, A. (2022), "Microstructural/geometric imperfection sensitivity on the vibration response of geometrically discontinuous bi-directional functionally graded plates (2D FGPs) with partial supports by using FEM", Steel Compos. Struct., 45(5), 621-640. https://doi.org/10.12989/scs.2022.45.5.621.
  34. Khadimallah, M.A., Hussain, M., Khedher, K.M., Naeem, M.N. and Tounsi, A. (2020), "Backward and forward rotating of FG ring support cylindrical shells", Steel Compos. Struct., 37(2), 137-150. http://doi.org/10.12989/scs.2020.37.2.137.
  35. Khorasani, M., Lampani, L. and Tounsi, A. (2023), "A refined vibrational analysis of the FGM porous type beams resting on the silica aerogel substrate", Steel Compos. Struct., 47(5), 633. https://doi.org/10.12989/scs.2023.47.5.633.
  36. Liu, G., Wu, S., Shahsavari, D., Karami, B. and Tounsi, A. (2022), "Dynamics of imperfect inhomogeneous nanoplate with exponentially-varying properties resting on viscoelastic foundation", Eur. J. Mech.- A/Solid., 95, 104649. https://doi.org/10.1016/j.euromechsol.2022.104649.
  37. Mahmoud, S.R., Ghandourah, E.I., Algarni, A.H., Balubaid, M.A., Tounsi, A., Tounsi, A. and Bourada, F. (2023), "Stability investigation of symmetrically porous advanced composites plates via a novel hyperbolic RPT", Steel Compos. Struct., 46(4), 471. https://doi.org/10.12989/scs.2023.46.4.471.
  38. Mesbah, A., Belabed, Z., Amara, K., Tounsi, A., Bousahla, A.A. and Bourada, F. (2023), "Formulation and evaluation a finite element model for free vibration and buckling behaviours of functionally graded porous (FGP) beams", Struct. Eng. Mech., 86(3), 291-309. https://doi.org/10.12989/sem.2023.86.3.291.
  39. Rabahi, A., Adim, B., Chargui, S. and Daouadji, T.H. (2014), "Interfacial stresses in FRP-plated RC beams: effect of adherend shear deformations", Conference on Multiphysics Modelling and Simulation for Systems Design, Cham, December. https://doi.org/10.1016/j.ijadhadh.2008.06.008.
  40. Rabia, B., Abderezak, R., Daouadji, T.H., Abbes, B., Belkacem, A. and Abbes, F. (2018), "Analytical analysis of the interfacial shear stress in RC beams strengthened with prestressed exponentially-varying properties plate", Adv. Mater. Res., 7(1), 29. https://doi.org/10.12989/amr.2018.7.1.029.
  41. Rabia, B., Daouadji, T.H. and Abderezak, R. (2019), "Effect of distribution shape of the porosity on the interfacial stresses of the FGM beam strengthened with FRP plate", Earthq. Struct., 16(5), 601. https://doi.org/10.12989/eas.2019.16.5.601.
  42. Rabia, B., Daouadji, T.H. and Abderezak, R. (2021), "Effect of air bubbles in concrete on the mechanical behavior of RC beams strengthened in flexion by externally bonded FRP plates under uniformly distributed loading", Compos. Mater. Eng., 3(1), 41. http://doi.org/10.12989/cme.2021.3.1.041.
  43. Rabia, B., Daouadji, T.H. and Abderezak, R. (2023), "Mechanical behavior of RC beams bonded with thin porous FGM plates: Case of fiber concretes based on local materials from the mountains of the Tiaret highlands", Couple. Syst. Mech., 12(3), 241-260. https://doi.org/10.12989/csm.2023.12.3.241.
  44. Smith, S.T. and Teng, J.G. (2001), "Interfacial stresses in plated beams", Eng. Struct., 23(7), 857-871. http://doi.org/10.1016/S0141-0296(00)00090-0.
  45. Tahar, H. D., Abderezak, R. and Rabia, B. (2020), "Flexural performance of wooden beams strengthened by composite plate", Struct. Monit. Mainten., 7(3), 233-259. http://doi.org/10.12989/smm.2020.7.3.233.
  46. Tahar, H.D., Boussad, A., Abderezak, R., Rabia, B., Fazilay, A. and Belkacem, A. (2019), "Flexural behaviour of steel beams reinforced by carbon fibre reinforced polymer: Experimental and numerical study", Struct. Eng. Mech., 72(4), 409-420. https://doi.org/10.12989/sem.2019.72.4.409.
  47. Tahar, H.D., Tayeb, B., Abderezak, R. and Tounsi, A. (2021), "New approach of composite wooden beam-reinforced concrete slab strengthened by external bonding of prestressed composite plate: Analysis and modeling", Struct. Eng. Mech., 78(3), 319-332. http://doi.org/10.12989/sem.2021.78.3.31.
  48. Tayeb, B. and Daouadji, T.H. (2020), "Improved analytical solution for slip and interfacial stress in composite steel-concrete beam bonded with an adhesive", Adv. Mater. Res., 9(2), 133. http://doi.org/10.12989/amr.2020.9.2.133.
  49. Tlidji, Y., Benferhat, R., Daouadji, T.H., Tounsi, A. and Trinh, L.C. (2022), "Free vibration analysis of FGP nanobeams with classical and non-classical boundary conditions using State-space approach", Adv. Nano Res., 13(5), 453. https://doi.org/10.12989/anr.2022.13.5.453.
  50. Van Vinh, P., Van Chinh, N. and Tounsi, A. (2022), "Static bending and buckling analysis of bi-directional functionally graded porous plates using an improved first-order shear deformation theory and FEM", Eur. J. Mech.-A/Solid., 96, 104743. https://doi.org/10.1016/j.euromechsol.2022.104743.
  51. Wang, Y.H., Yu, J., Liu, J.P., Zhou, B.X. and Chen, Y.F. (2020), "Experimental study on assembled monolithic steel-prestressed concrete composite beam in negative moment", J. Constr. Steel Res., 167, 105667. https://doi.org/10.1016/j.jcsr.2019.06.004.
  52. Xia, L., Wang, R., Chen, G., Asemi, K. and Tounsi, A. (2023), "The finite element method for dynamics of FG porous truncated conical panels reinforced with graphene platelets based on the 3-D elasticity", Adv. Nano Res., 14(4), 375-389. https://doi.org/10.12989/.2023.14.4.375.
  53. Zine, A., Bousahla, A.A., Bourada, F., Benrahou, K.H., Tounsi, A., Bedia, E.A., ... & Tounsi, A. (2020), "Bending analysis of functionally graded porous plates via a refined shear deformation theory", Comput. Concrete, 26(1), 63-74. http://doi.org/10.12989/cac.2020.26.1.063.
  54. Zohra, A., Rabia, B. and Tahar, H.D. (2023), "Critical thermal buckling analysis of porous FGP sandwich plates under various boundary conditions", Struct. Eng. Mech., 87(1), 29-46. https://doi.org/10.12989/sem.2023.87.1.029.