DOI QR코드

DOI QR Code

An analytical algorithm for assessing dynamic characteristics of a triple-tower double-cable suspension bridge

  • Wen-ming Zhang (The Key Laboratory of Concrete and Prestressed Concrete Structures of the Ministry of Education, Southeast University) ;
  • Yu-peng Chen (The Key Laboratory of Concrete and Prestressed Concrete Structures of the Ministry of Education, Southeast University) ;
  • Shi-han Wang (The Key Laboratory of Concrete and Prestressed Concrete Structures of the Ministry of Education, Southeast University) ;
  • Xiao-fan Lu (The Key Laboratory of Concrete and Prestressed Concrete Structures of the Ministry of Education, Southeast University)
  • 투고 : 2022.02.17
  • 심사 : 2024.04.25
  • 발행 : 2024.05.25

초록

Triple-tower double-cable suspension bridges have increased confinement stiffness imposed by the main cable on the middle tower, which has bright application prospects. However, vertical bending and torsional vibrations of the double-cable and the girder are coupled in such bridges due to the hangers. In particular, the bending vibration of the towers in the longitudinal direction and torsional vibrations about the vertical axis influence the vertical bending and torsional vibrations of the stiffening girders, respectively. The conventional analytical algorithm for assessing the dynamic features of the suspension bridge is not directly applicable to this type of bridge. This study attempts to mitigate this problem by introducing an analytical algorithm for solving the triple-tower double-cable suspension bridge's natural frequencies and mode shapes. D'Alembert's principle is employed to construct the differential equations of the vertical bending and torsional vibrations of the stiffening girder continuum in each span. Vibrations of stiffening girders in each span are interrelated via the vibrations of the main cables and the bridge towers. On this basis, the natural frequencies and mode shapes are derived by separating variables. The proposed algorithm is then applied to an engineering example. The natural frequencies and mode shapes of vertical bending and torsional vibrations derived by the analytical algorithm agreed well with calculations via the finite element method. The fundamental frequency of vertical bending and first- and second-order torsion frequencies of double-cable suspension bridges are much higher than those of single-cable suspension bridges. The analytical algorithm has high computational efficiency and calculation accuracy, which can provide a reference for selecting appropriate structural parameters to meet the requirements of dynamics during the preliminary design.

키워드

과제정보

The work described in this paper was financially supported by the National Key R&D Program of China (No. 2022YFB3706703), and the National Natural Science Foundation of China under Grant No. 52078134 and 52378138, which are gratefully acknowledged.

참고문헌

  1. Cao, H.Y., Qian, X.D., Zhou, Y.L., Chen, Z.J. and Zhu, H.P. (2018), "Feasible range for midtower lateral stiffness in threetower suspension bridges", J. Bridge. Eng., 23(3), 06017009. https://doi.org/10.1061/(ASCE)BE.1943-5592.0001196.
  2. Castellani, A. and Felloti, P. (1986), "Lateral vibration of suspension bridges", J. Struct. Eng., 112(9), 2169-2173. https://doi.org/10.1061/(ASCE)0733-9445(1986)112:9(2169).
  3. Chai, S.B., Xiao, R.C. and Li, X.N. (2014), "Longitudinal restraint of a double-cable suspension bridge", J. Bridge Eng., 19(4), 06013002. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000528.
  4. Chai, S.B., Xiao, R.C. and Sun, B. (2011), "Mechanical properties of double-cable suspension bridge system (I)", J. South China Univ. Techno. (Nat. Sci. Ed.), 39, 159-164. https://doi.org/10.3969/j.issn.1000-565X.2011.12.027.
  5. Chai, S.B., Xiao, R.C. and Sun, B. (2012), "Mechanical properties of the double main cables suspension Bridge (II)", J. South China Univ. Techno. (Nat. Sci. Ed.), 40, 23-28. https://doi.org/10.3969/j.issn.1000-565X.2012.02.005.
  6. Choi, D.H., Gwon, S.G. and Na, H.S. (2014), "Simplified analysis for preliminary design of towers in suspension bridges", J. Bridge Eng., 19(3), 04013007. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000551.
  7. Ding, N.H., Lin, L.X. and Liao, W.H. (2011), "Vibration of double cable suspension bridge under vehicle load", International Conference on Intelligent Structure and Vibration Control (ISVC 2011), Chongqing, China.
  8. Ding, N.H., Lin, L.X., Qian, Y.J. and Huang, L. (2011), "Study on seismic response characteristics of double cables suspension bridge", International Conference on Vibration, Structural Engineering, and Measurement (ICVSEM 2011), Shanghai, China.
  9. Ding, N.H., Qian, Y., Lin, L. and Wu, Y. (2010), "Vibration character of a double cable suspension bridge under a singlevehicle load", J. Vib. Shock, 29, 216-220.
  10. Ghannadi, P. and Kourehli, S.S. (2019a), "Data-driven method of damage detection using sparse sensors installation by SEREPa", J. Civil Struct. Hlth. Monit., 9, 459-475. https://doi.org/10.1007/s13349-019-00345-8.
  11. Ghannadi, P. and Kourehli, S.S. (2019b), "Model updating and damage detection in multi-story shear frames using Salp Swarm Algorithm", Earthq. Struct., 17(1), 63-73. https://doi.org/10.12989/eas.2019.17.1.063.
  12. Ghannadi, P. and Kourehli, S.S. (2019c), "Structural damage detection based on MAC flexibility and frequency using mothflame algorithm", Struct. Eng. Mech., 70(6), 649-659. https://doi.org/10.12989/sem.2019.70.6.649.
  13. Ghannadi, P. and Kourehli, S.S. (2020b), "Multiverse optimizer for structural damage detection: Numerical study and experimental validation", Struct. Des. Tall Spec. Build., 29(13), e1777. https://doi.org/10.1002/tal.1777.
  14. Ghannadi, P. and Kourehli, S.S. (2021), "An effective method for damage assessment based on limited measured locations in skeletal structures", Adv. Struct. Eng., 24(1), 183-195. https://doi.org/10.1177/1369433220947193.
  15. Ghannadi, P. and Kourehli, S.S. (2022), "Efficiency of the slime mold algorithm for damage detection of large-scale structures", Struct. Des. Tall Spec. Build., 31(14), e1967. https://doi.org/10.1002/tal.1967.
  16. Ghannadi, P., Kourehli, S.S., Noori, M. and Altabey, W.A. (2020a), "Efficiency of grey wolf optimization algorithm for damage detection of skeletal structures via expanded mode shapes", Adv. Struct. Eng., 23(13), 2850-2865. https://doi.org/10.1177/1369433220921000.
  17. Gimsing, N.J. (2005), "The modern cable-stayed bridge-50 years of development from 1955 to 2005", International Symposium on Innovation and Sustainability of Structures in Civil Engineering-Including Seismic Engineering (ISISS), Nanjing, China.
  18. Gwon, S.G., Hoon, Y. and Choi, D.H. (2014), "Effects of flexural rigidity of center tower in four-span suspension bridges", J. Korean Soc. Civil Eng., 34(1), 49-60. https://doi.org/10.12652/Ksce.2014.34.1.0049.
  19. Hayashikawa, T. (1997), "Torsional vibration analysis of suspension bridges with gravitational stiffness", J. Sound Vib., 204(1), 117-129. https://doi.org/10.1006/jsvi.1997.0948.
  20. Hayashikawa, T. and Watanabe, N. (1984), "Vertical vibration in Timoshenko beam suspension bridges", J. Eng. Mech., 110(3), 341-356. https://doi.org/10.1061/(ASCE)0733-9399(1984)110:3(341).
  21. Jin, H., Guo, X.Y., Wang, L.B. and Feng, D.M. (2015), "Modal analysis of the triple-tower twin-span suspension bridge in deck unit erection stage", J. Vibroeng., 17(4), 2001-2012.
  22. Michaltsos, G.T. and Raftoyiannis, I.G. (2012), Bridges' Dynamics, Bentham eBooks.
  23. Pena, A., Valenzuela, M., Marquez, M. and Pinto, H. (2017), "Minimum geotechnical requirements for traditional and singular bridges foundations design: Chacao Suspension Bridge", Rev. Constr., 16(3), 498-505. https://doi.org/10.7764/RDLC.16.3.498.
  24. Sun, Y., Zhu, H.P. and Xu, D. (2016), "A specific rod model based efficient analysis and design of hanger installation for selfanchored suspension bridges with 3D curved cables", Eng.
  25. Struct., 110, 184-208. https://doi.org/10.1016/j.engstruct.2015.11.040. Thai, H.T. and Choi, D.H. (2013), "Advanced analysis of multispan suspension bridges", J. Constr. Steel. Res., 90, 29-41. https://doi.org/10.1016/j.jcsr.2013.07.015.
  26. Wang, L.B., Guo, X.Y., Noori, M. and Hua, J. (2014), "Modal analysis of cable-tower system of twin-span suspension bridge", J. Vibroeng., 16(4), 1977-1991.
  27. Wang, X.L., Chai, S.B. and Xu, Y. (2016), "Deformation characteristics of double-cable multispan suspension bridges", J. Bridge Eng., 21(4), 06015007. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000858.
  28. Wang, X.M., Wang, H., Sun, Y., Mao, X. and Tang, S. (2020), "Process-independent construction stage analysis of selfanchored suspension bridges", Autom. Constr., 117, 103227. https://doi.org/10.1016/j.autcon.2020.103227.
  29. Wang, X.M., Wang, H., Zhang, J., Sun, Y., Bai, Y., Zhang, Y. and Wang, H. (2021), "Form-finding method for the target configuration under dead load of a new type of spatial selfanchored hybrid cable-stayed suspension bridges", Eng. Struct., 227, 111407. https://doi.org/10.1016/j.engstruct.2020.111407.
  30. Xun, J., He, S. and Song, T. (2016), "Estimation frequency formulas for vertical vibration for three-span continuous system suspension bridge considering tower stiffness influence", J. Beijing Univ. Technol., 42, 1697-1702. https://doi.org/10.11936/bjutxb2016050052.
  31. Yang, G., Li, Z., Hao, X., Wang, X. and Song, T. (2016), "Practical formulas for calculating fundamental frequency of symmetric vertical vibration of asymmetry suspension bridges", Eng. J. Wuhan Univ. Eng., 49(2), 247-253. (in Chinese)
  32. Yoshida, O., Okuda, M. and Moriya, T. (2004), "Structural characteristics and applicability of four-span suspension bridge", J. Bridge Eng., 9(5), 453-463. https://doi.org/10.1061/(ASCE)1084-0702(2004)9:5(453).
  33. Zhang, W.M., Ge, Y.J. and Levitan, M.L. (2013), "A method for nonlinear aerostatic stability analysis of long-span suspension bridges under yaw wind", Wind Struct., 17(5), 553-564. https://doi.org/10.12989/was.2013.17.5.553.
  34. Zhang, W.M., Wang, Z.W., Zhang, H.Q., Lu, X.F. and Liu, Z. (2020), "Analytical study on free vertical and torsional vibrations of two-and three-pylon suspension bridges via D'alembert's principle", Struct. Eng. Mech., 76(3), 293-310. https://doi.org/10.12989/sem.2020.76.3.293.
  35. Zhang, W.M., Yang, C.Y. and Chang, J.Q. (2021), "Cable shape and construction parameters of triple-tower double-cable suspension bridge with two asymmetrical main spans", J. Bridge Eng., 26(2), 04020127. https://doi.org/10.1061/(ASCE)BE.1943-5592.0001674.