참고문헌
- Bergdahl C, Ekholm C, Wennergren D, Nilsson F, Moller M. Epidemiology and patho-anatomical pattern of 2,011 humeral fractures: data from the Swedish Fracture Register. BMC Musculoskelet Disord 2016;17:159.
- Robinson CM, Hill RM, Jacobs N, Dall G, Court-Brown CM. Adult distal humeral metaphyseal fractures: epidemiology and results of treatment. J Orthop Trauma 2003;17:38-47. https://doi.org/10.1097/00005131-200301000-00006
- Gupta R, Khanchandani P. Intercondylar fractures of the distal humerus in adults: a critical analysis of 55 cases. Injury 2002;33:511-5. https://doi.org/10.1016/S0020-1383(02)00009-8
- Villar RN, Marsh D, Rushton N, Greatorex RA. Three years after Colles' fracture: a prospective review. J Bone Joint Surg Br 1987;69:635-8. https://doi.org/10.2106/00004623-198769040-00029
- Jeong HS, Park KJ, Kil KM, et al. Minimally invasive plate osteosynthesis using 3D printing for shaft fractures of clavicles: technical note. Arch Orthop Trauma Surg 2014;134:1551-5. https://doi.org/10.1007/s00402-014-2075-8
- Baburaj V, Patel S, Kumar V, Dhillon MS. Utility of 3D printing in the surgical management of intra-articular distal humerus fractures: a protocol for systematic review and meta-analysis. medRxiv [Preprint]. 2022 [cited 2023 Nov 1]. https://doi.org/10.1101/2022.01.25.22269836.
- Sterne JAC, Savovic J, Page MJ, et al. RoB 2: a revised tool for assessing risk of bias in randomised trials. BMJ 2019;366:l4898.
- Shuang F, Hu W, Shao Y, Li H, Zou H. Treatment of intercondylar humeral fractures with 3D-printed osteosynthesis plates. Medicine (Baltimore) 2016;95:e2461.
- Yang L, Grottkau B, He Z, Ye C. Three dimensional printing technology and materials for treatment of elbow fractures. Int Orthop 2017;41:2381-7. https://doi.org/10.1007/s00264-017-3627-7
- Zheng W, Su J, Cai L, et al. Application of 3D-printing technology in the treatment of humeral intercondylar fractures. Orthop Traumatol Surg Res 2018;104:83-8. https://doi.org/10.1016/j.otsr.2017.11.012
- Xie L, Chen C, Zhang Y, Zheng W, Chen H, Cai L. Three-dimensional printing assisted ORIF versus conventional ORIF for tibial plateau fractures: a systematic review and meta-analysis. Int J Surg 2018;57:35-44. https://doi.org/10.1016/j.ijsu.2018.07.012
- Cao J, Zhu H, Gao C. A systematic review and meta-analysis of 3D printing technology for the treatment of acetabular fractures. Biomed Res Int 2021;2021:5018791.
- Bai J, Wang Y, Zhang P, et al. Efficacy and safety of 3D print-assisted surgery for the treatment of pilon fractures: a meta-analysis of randomized controlled trials. J Orthop Surg Res 2018;13:283.
- Li K, Liu Z, Li X, Wang J. 3D printing-assisted surgery for proximal humerus fractures: a systematic review and meta-analysis. Eur J Trauma Emerg Surg 2022;48:3493-503. https://doi.org/10.1007/s00068-021-01851-5
- Dos Santos-Vaquinhas A, Lopez-Torres II, Matas-Diez JA, Calvo-Haro JA, Vaquero J, Sanz-Ruiz P. Improvement of surgical time and functional results after do-it-yourself 3D-printed model preoperative planning in acetabular defects Paprosky IIA-IIIB. Orthop Traumatol Surg Res 2022;108:103277.
- You W, Liu LJ, Chen HX, et al. Application of 3D printing technology on the treatment of complex proximal humeral fractures (Neer3-part and 4-part) in old people. Orthop Traumatol Surg Res 2016;102:897-903. https://doi.org/10.1016/j.otsr.2016.06.009
- Cheng H, Clymer JW, Po-Han Chen B, et al. Prolonged operative duration is associated with complications: a systematic review and meta-analysis. J Surg Res 2018;229:134-44. https://doi.org/10.1016/j.jss.2018.03.022