과제정보
This work was supported by the South Korean Ministry of Trade, Industry and Energy; Korea Institute of Energy Technology Evaluation and Planning (KETEP) grant funded by the Korean government (20224B10100030).
참고문헌
- R.B. Dooley, V.K. Chexal, Flow-accelerated corrosion in pipe wall downstream of orifice for water and air-water bubble flows, Int. J. Pres. Ves. Pip. 77 (2000) 85-90. https://doi.org/10.1016/S0308-0161(99)00087-3
- I.S. Woosey, Assessment and avoidance of erosion-corrosion damage in PWR feedpiperwork, IAEA Report: IWG-RRPC-88-1, Vienna, 19910.
- W. Kastner, M. Erve, N. Henzel, B. Stellwag, Calculation code for errosion induced wall thinning in piping systems, Nucl. Eng. Des. 119 (1990) 431-438. https://doi.org/10.1016/0029-5493(90)90182-W
- T. Sydberger, U. Lotz, Relation between mass transfer and corrosion in a turbulent pipe flow, J. Electrochem. Soc. 129 (1982) 276-283. https://doi.org/10.1149/1.2123812
- S. Moon, K. Kim, G.G. Lee, Y. Yu, D.-J. Kim, Pipeline wall thinning rate prediction model based on machine learning, Nucl. Eng. Technol. 53 (2021) 4060-4066. https://doi.org/10.1016/j.net.2021.06.040
- EPRI, CHECWORKS Computer Program Users Guide, TR-103198-PI, 1997.
- S. Trevin, M. Persoz, and T. Knook, Making FAC calculations with BRT-CICERO and updating to version 3.0, 17th international conference on nuclear engineering, Vol. 1: Plant Operations, Maintenance, Eng., Modifications Life Cycle, Comp. Reliabil. Mater, issues; Nest Generation Syst. Brussels Belgium: 81-88.
- K. Fujiwara, M. Domae, K. Yoneda, and F. Inada, Effects of Water Chemistry and Fluid Dynamics on Wall Thinning Behavior Part 2 - Evaluation of Influencial Factors by Flow Accelerated Corrosion Tests. CRIEPI-Report: Q09028.
- K. Fujiwara, and M. Domae, Effects of Water Chemistry on Wall Thinning Behavior in Single - Phase and Two - Phase Flow, CRIEPI-Report: Q11025.
- Y.S. Lee, S.H. Lee, K.M. Hwang, Cause analysis of flow accelerated corrosion and erosion-corrosion cases in Korea nuclear power plants, Corrosion Sci. Technol. 15 (2016) 182-188. https://doi.org/10.14773/cst.2016.15.4.182
- H.P. Rani, T. Divya, R.R. Sahaya, V. Kain, D.K. Barua, CFD study of flow accelerated corrosion in 3D elbows, Ann. Nucl. Energy 69 (2014) 344-351. https://doi.org/10.1016/j.anucene.2014.01.031
- Flow Accelerated Corrosion in Power Plants, EPRI Report, 1998. TR-106611-R1, Palo Alto, CA.
- D.-J. Kim, K.M. Kim, J.H. Shin, Y.M. Cheong, E.H. Lee, G.G. Lee, S.W. Kim, H. P. Kim, M.J. Choi, Y.S. Lim, S.S. Hwang, Oxidation behavior of steel with Cr content and water flow rate, Arch. Metall. Mater. 62 (2017) 1383-1387. https://doi.org/10.1515/amm-2017-0213
- J. Han, S.H. Jeon, H.S. Shim, Y.K. Lee, D.H. Hur, Characteristics of Oxide Films Formed on A106 Gr.B and A335P22 in a Flowing Alkaline Solution at 150 ℃, Transactions of the Korean Nuclear Society Autumn Meeting, 2023.
- L. Jingjun, L. Yuzhen, L. Xiaoyu, Numerical simulation for carbon steel flow-induced corrosion in high-velocity flow seawater, Anti-corrosion Methods & Mater. 55 (2008).
- D.G. Kang, J.C. Jo, J.C. Jo, CFD application to the regulatory assessment of FAC-caused CANDU feeder pipe wall thinning issue, Nucl. Eng. Technol. 40 (2008) 37-48. https://doi.org/10.5516/NET.2008.40.1.037
- M. El-Gammal, W.H. Ahme, C.Y. Ching, Investigation of wall mass transfer characteristics downstream of an orifice, Nucl. Eng. Des. 242 (2012) 353-360. https://doi.org/10.1016/j.nucengdes.2011.10.009
- D.-J. Kim, S. W Kim, J.Y. Lee, K.M. Kim, S.B. Oh, G.G. Lee, J. Kim, S.S. Hwang, M. J. Choi, Y.S. Lim, S.H. Cho, H.P. Kim, Flow-accelerated corrosion assessment for SA106 and SA335 pipes with elbows and welds, Nucl. Eng. Technol. 53 (2021) 3003-3011. https://doi.org/10.1016/j.net.2021.03.026
- L. Zeng, G.A. Zhang, X.P. Guo, C.W. Chai, Inhibition effect of thioureidoimidazoline inhibitor for the flow accelerated corrosion of an elbow, Corrosion Sci. 90 (2015) 202-215. https://doi.org/10.1016/j.corsci.2014.10.011
- S. Ebara, H. Takamura, H. Hashizume, H. Yamano, Characteristics of flow field and pressure fluctuation in complex turbulent flow in the third elbow of a triple elbow piping with small curvature radius in three-dimensional layout, Int. J. Hydrogen Energy 41 (2016) 7139-7145. https://doi.org/10.1016/j.ijhydene.2016.02.068
- L. Xu, Q. Zhang, J. Zheng, Y. Zhao, Numerical prediction of erosion in elbow based on CFD-DEM simulation, Powder Technol. 302 (2016) 236-246. https://doi.org/10.1016/j.powtec.2016.08.050
- J. Tian, H. Huang, Z. Pan, H. Zhou, Effect of flow velocity on corrosion behavior of AZ91D magnesium alloy at elbow of loop system, Trans. Nonferrous Metals Soc. China 26 (2016) 2857-2867. https://doi.org/10.1016/S1003-6326(16)64414-X
- K.M. Kim, Y. Choeng, E.H. Lee, J.Y. Lee, S. Oh, D. Kim, Effects of alloys and flow velocity on welded pipeline wall thinning in simulated secondary environment for nuclear power plants, Corrosion Sci. Technol. 15 (2016) 245-252. https://doi.org/10.14773/cst.2016.15.5.245
- E. McCaffert, Validation of corrosion rates measured by the tafel extrapolation method, Corrosion Sci. 47 (2005) 3202-3215. https://doi.org/10.1016/j.corsci.2005.05.046