과제정보
This research was supported by the National Science Foundation of China (Grant No. 52177202 and No. 5230071484).
참고문헌
- Liu, J.L., Xiao, F., Mai, Z.Q.: Position-sensorless startup strategy for permanent magnet synchronous motor based on double dq space. Trans. China Electrotech. Soc. 33(12), 2677-2684 (2018)
- Luo, X., Tang, Q., Shen, A.: PMSM sensorless control by injecting HF pulsating carrier signal into estimated fxed-frequency rotating reference frame. IEEE Trans. Industr. Electron. 63(04), 2294-2303 (2016) https://doi.org/10.1109/TIE.2015.2505679
- Li, Y.H., Zhang, X., Yang, S.Y.: Review on sensorless control of permanent magnet synchronous motor based on high-frequency signal injection. Trans. China Electrotech. Soc. 33(12), 2654-2664 (2018)
- Wang, H., Zhao, B.S., Tang, S.Q.: Research on the influence of the position detection error to the PMSM drive system. Trans. China Electrotech. Soc. 33(04), 911-918 (2018)
- Yang, S., Hsu, Y.: Full speed zone sensorless drive of permanent-magnet machine combining saliency-based and Back-EMF-based drive. IEEE Trans. Ind. Electron. 64(02), 1092-1101 (2017) https://doi.org/10.1109/TIE.2016.2612175
- Huang, W.Z., Yan, X.P., Liu, Z.L.: Technology development and prospect of shaftless rim-driven propulsion system. J. Wuhan Univ. Technol. (Transport. Sci. Eng.) 39(03), 601-605 (2015)
- Liu, J.L., Xiao, F., Mai, Z.Q.: Hybrid position-sensorless control scheme for PMSM based on combination of if control and sliding mode observer. Trans. China Electrotech. Soc. 33(04), 919-929 (2018)
- Zhu, Z.Q., Gong, L.M.: Investigation of effectiveness of sensorless operation in carrier-signal-injection-based sensorless-control methods. IEEE Trans. Ind. Electron. 58(08), 3431-3439 (2010)
- Zhang, X., Li, H.Y., Yang, S.Y.: Improved initial rotor position estimation for PMSM drives based on HF pulsating voltage signal injection. IEEE Trans. Ind. Electron. 65(06), 4702-4713 (2018) https://doi.org/10.1109/TIE.2017.2772204
- Tang, Q.P., Shen, A.W., Luo, X.: IPMSM sensorless control by injecting bidirectional rotating HF carrier signals. IEEE Trans. Power Electron. 33(12), 10698-10707 (2018) https://doi.org/10.1109/TPEL.2018.2811126
- Li, J., Zhou, B., Liu, B.: A novel starting strategy of sensorless control for surface mounted permanent magnet synchronous machines. Proc. CSEE 36(09), 2513-2520 (2016)
- Wang, G.L., Yang, L.G., Zhang, Q.: Comparative investigation of pseudorandom high frequency signal injection schemes for sensorless IPMSM drives. IEEE Trans. Power Electron. 32(03), 2123-2132 (2017) https://doi.org/10.1109/TPEL.2016.2569418
- Wu, C.: Research on sensorless control technology for permanent magnet synchronous motor speed control system. Ph.D. dissertation, Northwestern Polytechnical University, NPU, Xian (2015)
- Yang, S.C., Suzuki, T.R., Lorenz, D.: Surface permanent magnet synchronous machine design for saliency tracking self-sensing position estimation at zero and low speeds. IEEE Trans. Ind. Appl. 47(05), 2103-2116 (2011) https://doi.org/10.1109/TIA.2011.2161630
- Peng, W., Qiao, M.Z., Jiang, C.: Rotational high frequency injection method based on online position error compensation of positive sequence component. Trans. China Electrotech. Soc. 35(24), 5088-5095 (2020)
- Du, S.C., Quan, L., Zhu, X.Y.: Fault-tolerant control of position sensor failure for PMSM at zero and low speed based on high frequency injection. Proc. CSEE 39(10), 3038-3046 (2016)
- Yang, J., Yang, S.Y., Li, H.Y.: Initial rotor position estimation for IPMSM based on high frequency rotating voltage injection. Trans. China Electrotech. Soc. 33(15), 71 (2018)
- Li, H.Y., Zhang, X.S., Yang, Y.: A detecting algorithm for initial position of interior permanent magnet synchronous motor based on rotating high frequency injection. Trans. China Electrotech. Soc. 33(08), 1724-1731 (2018)
- Zhang, X., Li, H.Y., Yang, S.Y.: Improved initial rotor position estimation for PMSM drives based on HF pulsating voltage signal injection. IEEE Trans. Ind. Electron. 66(06), 4702-4713 (2018) https://doi.org/10.1109/TIE.2017.2772204
- Zhu, Z.Q., Li, Y., Howe, D.: Compensation for rotor position estimation error due to cross-coupling magnetic saturation in signal injection based sensorless control of PM brushless AC motors. In: IEEE International Electric Machines and Drives Conference, pp. 208-213 (2017)