과제정보
This work was supported by the Korea Atomic Energy Research Institute R&D Program (Contract No. 524480-23) and the National Research Foundation of Korea (NRF) grant funded by the Korean Government (2021M2E4A1037979).
참고문헌
- K. Fujimoto, T. Tsuda, Y. Mogami, T. Matsubara, S. Yaguchi, Post-irradiation examination using TEM method for swelling evaluation of baffle plate in PWR core internals, in: Proceeding 54th Annu. Meet. Hot Lab. Remote Handl. Work. Gr., HOTLAB 2017), Japan, 2017, p. 540.
- S.S. Hwang, S.W. Kim, M.J. Choi, S.H. Cho, D.J. Kim, Failure evaluation plan of a reactor internal components of a decommissioned plant, Corros. Sci. Technol. 20 (2021) 189-195, https://doi.org/10.14773/cst.2021.20.4.189.
- Materials Reliability Program, South Texas Project Unit 1 Bottom Mounted Instrumentation Nozzles (#1 and #46) Analysis Reports and Related Documentation, 2003. MRP-102), https://www.epri.com/research/products/1009309.
- Palo Verde Nuclear Generating Station (PVNGS) Unit 3, Docket No. STN 50-530, License No. NPF 74, Licensee Event Report 2013- 001-00, 2014.
- I.A.E. Agency, Stress Corrosion Cracking in Light Water Reactors: Good Practices and Lessons Learned, IAEA, International Atomic Energy Agency (IAEA), 2011. http://www-pub.iaea.org/MTCD/publications/PDF/P1522_web.pdf. http://www-pub.iaea.org/MTCD/publications/publications.asp. LK.
- C. Liu, Y. Luo, M. Yang, Q. Fu, Three-dimensional finite element simulation of welding residual stress in RPV with two J-groove welds, Weld. World 61 (2017) 151-160, https://doi.org/10.1007/s40194-016-0392-y.
- S. Das Banik, S. Kumar, P.K. Singh, S. Bhattacharya, M.M. Mahapatra, Distortion and residual stresses in thick plate weld joint of austenitic stainless steel: experiments and analysis, J. Mater. Process. Technol. 289 (2021), 116944, https://doi.org/10.1016/j.jmatprotec.2020.116944.
- R. Kumar, H.C. Dey, A.K. Pradhan, S.K. Albert, J.G. Thakre, M.M. Mahapatra, C. Pandey, Numerical and experimental investigation on distribution of residual stress and the influence of heat treatment in multi-pass dissimilar welded rotor joint of alloy 617/10Cr steel, Int. J. Pres. Ves. Pip. 199 (2022), 104715, https://doi.org/10.1016/j.ijpvp.2022.104715.
- P. Xie, H. Zhao, B. Wu, S. Gong, Evaluation of residual stresses relaxation by post weld heat treatment using contour method and X-ray diffraction method, Exp. Mech. 55 (2015) 1329-1337, https://doi.org/10.1007/s11340-015-0040-2.
- S. Zhang, Z. Fan, J. Li, S. Wen, S. Paddea, L. Lu, S. Li, Experimental characterisation and numerical modelling of residual stresses in a nuclear safe-end dissimilar metal weld joint, Metals 11 (2021) 1298, https://doi.org/10.3390/met11081298.
- Y. Wan, W. Jiang, J. Li, G. Sun, D.-K. Kim, W. Woo, S.-T. Tu, Weld residual stresses in a thick plate considering back chipping: neutron diffraction, contour method and finite element simulation study, Mater. Sci. Eng. 699 (2017) 62-70, https://doi.org/10.1016/j.msea.2017.05.079.
- W. Woo, G.B. An, E.J. Kingston, A.T. DeWald, D.J. Smith, M.R. Hill, Through-thickness distributions of residual stresses in two extreme heat-input thick welds: a neutron diffraction, contour method and deep hole drilling study, Acta Mater. 61 (2013) 3564-3574, https://doi.org/10.1016/j.actamat.2013.02.034.
- W. Woo, V. Em, C.R. Hubbard, H.-J. Lee, K.S. Park, Residual stress determination in a dissimilar weld overlay pipe by neutron diffraction, Mater. Sci. Eng. 528 (2011) 8021-8027, https://doi.org/10.1016/j.msea.2011.07.059.
- MRP-317, Revision 1), Material Reliability Program: Welding Residual Stress Dissimilar Metal Butt-Weld Finite Element Modeling Handbook, 2015.
- S.-H. Lee, Y.-S. Chang, S.-W. Kim, Residual stress assessment of nickel-based alloy 690 welding parts, Eng. Fail. Anal. 54 (2015) 57-73, https://doi.org/10.1016/j.engfailanal.2015.03.022.
- H.-Y. Bae, J.-H. Kim, Y.-J. Kim, C.-Y. Oh, J.-S. Kim, S.-H. Lee, K.-S. Lee, Sensitivity analysis of finite element parameters for estimating residual stress of J-groove weld in RPV CRDM penetration nozzle, Trans. Korean Soc. Mech. Eng. A. 36 (2012) 1115-1130, https://doi.org/10.3795/KSME-A.2012.36.10.1115.
- T.-K. Song, H.-Y. Bae, Y.-J. Kim, K.-S. Lee, C.-Y. Park, J.-S. Yang, N.-S. Huh, J.-W. Kim, J.-S. Park, M.-S. Song, S.-G. Lee, J.-S. Kim, S.-C. Yu, Y.-S. Chang, Assessment of round robin analyses results on welding residual stress prediction in a nuclear power plant nozzle, Trans. Korean Soc. Mech. Eng. A. 33 (2009) 72-81, https://doi.org/10.3795/KSME-A.2009.33.1.72.
- A.S. for T. and Materials, Standard Test Method for Determining Residual Stresses by the Hole-Drilling Strain-Gage Method, ASTM International, 2020, https://doi.org/10.1520/E0837-20.
- Y. Zhang, S. Ganguly, L. Edwards, M.E. Fitzpatrick, Cross-sectional mapping of residual stresses in a VPPA weld using the contour method, Acta Mater. 52 (2004) 5225-5232, https://doi.org/10.1016/j.actamat.2004.07.045.
- W. Woo, V. Em, B.-S. Seong, E. Shin, P. Mikula, J. Joo, M.-H. Kang, Effect of wavelength-dependent attenuation on neutron diffraction stress measurements at depth in steels, J. Appl. Crystallogr. 44 (2011) 747-754, https://doi.org/10.1107/S0021889811018899.
- T. Pirling, D.J. Hughes, J.S. Robinson, Precise determination of residual stresses in large specimens by neutron diffraction, Mater. Sci. Forum 652 (2010) 80-85. https://doi.org/10.4028/www.scientific.net/MSF.652.80.
- K. Ogawa, D. Deng, S. Kiyoshima, N. Yanagida, K. Saito, Investigations on welding residual stresses in penetration nozzles by means of 3D thermal elastic plastic FEM and experiment, Comput. Mater. Sci. 45 (2009) 1031-1042, https://doi.org/10.1016/j.commatsci.2009.01.008.