References
- J.A. Olivier, J.B. Marcinichen, A. Bruch, J. Thome, Green cooling of high performancet microprocessors: parametric study between flow boiling and water cooling, ASME. Journal of Thermal Science and Engineering Applications 3 (4) (2011).
- H. Lv, H. Ma, Y. Zhao, N. Mao, T. He, Numerical simulation of flow boiling heat transfer characteristics of R134a/ethane binary mixture in horizontal micro-tube, Int. J. Refrig. 146 (2023) 126-134.
- S.S. Bertsch, E.A. Groll, S.V. Garimella, Review and comparative analysis of studies on saturated flow boiling in small channels, Nanoscale Microscale Thermophys. Eng. 12 (3) (2008) 187-227. https://doi.org/10.1080/15567260802317357
- D. Kromer, S. Garimella, S. Chandrasekaran, Experimental investigation and modeling of flow boiling in microchannel heat exchangers for integral steam generator applications, Nucl. Eng. Des. 372 (2021), 111001.
- J. Yan, Q. Bi, G. Zhu, L. Cai, Q. Yuan, H. Lv, Critical heat flux of highly subcooled water flow boiling in circular tubes with and without internal twisted tapes under high mass fluxes, Int. J. Heat Mass Tran. 95 (2016) 606-619. https://doi.org/10.1016/j.ijheatmasstransfer.2015.12.024
- R. Samaroo, N. Kaur, K. Itoh, T. Lee, S. Banerjee, M. Kawaji, Turbulent flow characteristics in an annulus under air bubble injection and subcooled flow boiling conditions, Nucl. Eng. Des. 268 (2014) 203-214. https://doi.org/10.1016/j.nucengdes.2013.04.046
- X. Zhang, T. Hu, D. Chen, Y. Zhong, H. Gao, CFD simulation on critical heat flux of flow boiling in IVR-ERVC of a nuclear reactor, Nucl. Eng. Des. 304 (2016) 70-79. https://doi.org/10.1016/j.nucengdes.2016.04.043
- E.J. Owoeye, D. Schubring, Computational modeling of bubble coalescence in a high-pressure steam-water flow, Nucl. Eng. Des. 319 (2017) 28-39. https://doi.org/10.1016/j.nucengdes.2017.04.032
- M. Azzolin, S. Bortolin, D.D. Col, Flow boiling heat transfer of a zeotropic binary mixture of new refrigerants inside a single microchannel, Int. J. Therm. Sci. 110 (2016) 83-95. https://doi.org/10.1016/j.ijthermalsci.2016.06.026
- C. Guo, J. Wang, X. Du, L. Yang, Experimental flow boiling characteristics of R134a/R245fa mixture inside smooth horizontal tube, Appl. Therm. Eng. 103 (2016) 901-908. https://doi.org/10.1016/j.applthermaleng.2016.04.162
- D. Cai, Y. Liu, X. Liang, J. Jiang, M. Fan, G. He, Experimental investigation of flow boiling heat transfer characteristics in smooth horizontal t, Int. J. Heat Mass Tran. 127 (2018) 799-812. https://doi.org/10.1016/j.ijheatmasstransfer.2018.08.078
- X.L. Xie, Z.J. Liu, Y.L. He, W.Q. Tao, Numerical study of laminar heat transfer and pressure drop characteristics in a water-cooled minichannel heat sink, Appl. Therm. Eng. 29 (2009) 64-74. https://doi.org/10.1016/j.applthermaleng.2008.02.002
- D. Deng, R. Chen, H. He, J. Feng, Y. Tang, W. Zhou, Effects of heat flux, mass flux and channel size on flow boiling performance of reentrant porous microchannels, Exp. Therm. Fluid Sci. 64 (2015) 13-22. https://doi.org/10.1016/j.expthermflusci.2015.01.015
- T. Harirchian, S.V. Garimella, Effects of channel dimension, heat flux, and mass flux on flow boiling regimes in microchannels, Int. J. Multiphas. Flow 35 (2009) 349-362. https://doi.org/10.1016/j.ijmultiphaseflow.2009.01.003
- M. Nedaei, A.R. Motezakker, M.T.C. Zeybek, M. Sezen, G.O. Ince, A. Kosar, Subcooled flow boiling heat transfer enhancement using polyperfluorodecylacrylate (pPFDA) coated microtubes with different coating thicknesses, Exp. Therm. Fluid Sci. 86 (2017) 130-140. https://doi.org/10.1016/j.expthermflusci.2017.04.008
- Y. S,is,man, A.K. Sadaghiani, R. Khedir, M. Brozak, T. Karabacak, A. Kos,ar, Subcooled flow boiling over microstructured plates in rectangular minichannels, Nanoscale Microscale Thermophys. Eng. 20 (3-4) (2016) 173-190. https://doi.org/10.1080/15567265.2016.1248584
- W.-T. Hsu, N. Lee, D. Lee, J.J. Kim, M. Yun, H.H. Cho, Surfaces with bent micro-polymerized pillars exhibit enhanced heat transfer during subcooled flow boiling, Int. J. Heat Mass Tran. 182 (2022), 121941.
- M. Piasecka, An application of enhanced heating surface with mini-reentrant cavities for flow boiling research in minichannels, Heat Mass Tran. 49 (2013) 261-275. https://doi.org/10.1007/s00231-012-1082-y
- M. Piasecka, Heat transfer mechanism, pressure drop and flow patterns during FC-72 flow boiling in horizontal and vertical minichannels with enhanced walls, Int. J. Heat Mass Tran. 66 (2013) 472-488. https://doi.org/10.1016/j.ijheatmasstransfer.2013.07.046
- M. Piasecka, The use of enhanced surface in flow boiling heat transfer in a rectangular minichannel, Exp. Heat Tran.: A Journal of Thermal Energy Generation, Transport, Storage, and Conversion 27 (2014) 231-255.
- Y. Sun, L. Zhang, H. Xu, X. Zhong, Subcooled flow boiling heat transfer from microporous surfaces in a small channel, Int. J. Therm. Sci. 50 (2011) 881-889. https://doi.org/10.1016/j.ijthermalsci.2011.01.019
- M. Piasecka, K. Strak, Influence of the surface enhancement on the flow boiling heat transfer in a minichannel, Heat Tran. Eng. 40 (2018) 1162-1175. https://doi.org/10.1080/01457632.2018.1457264
- S.W. Lee, K.M. Kim, C. Bang, Study on flow boiling critical heat flux enhancement of graphene oxide/water nanofluid, Int. J. Heat Mass Tran. 65 (2013) 348-356. https://doi.org/10.1016/j.ijheatmasstransfer.2013.06.013
- Y. Wang, J.M. Wu, Numerical simulation on single bubble behavior during Al2O3/H2O nanofluids flow boiling using Moving Particle Simi-implicit method, Prog. Nucl. Energy 85 (2015) 130-139. https://doi.org/10.1016/j.pnucene.2015.06.017
- S.J. Kim, T. McKrell, J. Buongiorno, L.W. Hu, Subcooled flow boiling heat transfer of dilute alumina, zinc oxide, and diamond nanofluids at atmospheric pressure, Nucl. Eng. Des. 240 (2010) 1186-1194. https://doi.org/10.1016/j.nucengdes.2010.01.020
- S. aisorn, J. Kaew-On, S. Wongwises, Flow pattern and heat transfer characteristics of R-134a refrigerant during flow boiling in a horizontal circular mini-channel, Int. J. Heat Mass Tran. 3 (2010) 4023-4038. https://doi.org/10.1016/j.ijheatmasstransfer.2010.05.022
- R. Ali, B. Palm, Dryout characteristics during flow boiling of R134a in vertical circular minichannels, Int. J. Heat Mass Tran. 54 (2011) 434-2445. https://doi.org/10.1016/j.ijheatmasstransfer.2011.02.018
- Y.S. See, K.C. Leong, Entropy generation for flow boiling on a single semi-circular minichannel, Int. J. Heat Mass Tran. 154 (2020), 119689.
- K. Enoki, K. Miyata, H. Mori, K. Kariya, Y. Hamamoto, Boiling heat transfer and pressure drop of a refrigerant flowing vertically upward in small rectangular and triangular tubes, Heat Tran. Eng. 34 (2013) 966-975. https://doi.org/10.1080/01457632.2012.753576
- R.R. Bhide, S.G. Singh, A. Sridharan, S.P. Duttagupta, A. Agrawal, Pressure drop and heat transfer characteristics of boiling water in sub-hundred micron channel, Exp. Therm. Fluid Sci. 33 (2009) 963-975. https://doi.org/10.1016/j.expthermflusci.2009.04.004
- W. Chang, Wei, S.S. Zhang, S. Tian, M.J. Huo, Research on the flow boiling and heat transfer of ethanol in a corrugated mini-channel, Appl. Mech. Mater. 66-68 (2011) 876-881. https://doi.org/10.4028/www.scientific.net/AMM.66-68.876
- Y.K. Prajapati, M. Pathak, M.K. Khan, A comparative study of flow boiling heat transfer in three different configurations of microchannels, Int. J. Heat Mass Tran. 85 (2015) 711-722. https://doi.org/10.1016/j.ijheatmasstransfer.2015.02.016
- N. Tiwari, M.K. Moharana, Conjugate effect on flow boiling instability in wavy microchannel, Int. J. Heat Mass Tran. 166 (2021), 120791.
- C.W. Hirt, B.D. Nichols, Volume of fluid (VOF) method for the dynamics of free boundaries, J. Comput. Phys. 39 (1981) 201-225. https://doi.org/10.1016/0021-9991(81)90145-5
- J.U. Brackbill, D.B. Kothe, C. Zemach, A continuum method for modeling surface tension, J. Comput. Phys. 100 (1992) 130-139. https://doi.org/10.1016/0021-9991(92)90240-Y
- F.R. Menter, Two-equation eddy-viscosity turbulence models for engineering applications, AIAA J. (1994) 1598-1605.
- W.H. Lee, Pressure Iteration Scheme for Two-phase Flow Modeling, Multiphase Transport: Fundamentals, Reactor Safety, Applications, 1980, pp. 407-432.
- J.F. Klausner, R. Mei, D.M. Bernhard, L.Z. Zeng, Vapor bubble departure in forced convection boiling, Int. J. Heat Mass Tran. 3 (1993) 651-662. https://doi.org/10.1016/0017-9310(93)80041-R
- L.Z. Zeng, J.F. Klausner, D.M. Bernhard, R. Mei, A unified model for the prediction of bubble detachment diameters in boiling systems-II. Flow boiling, Int. J. Heat Mass Tran. 36 (1993) 2271-2279. https://doi.org/10.1016/S0017-9310(05)80112-7
- J. Lee, L.E. O'Neill, S. Lee, I. Mudawar, Experimental and computational investigation on two-phase flow and heat transfer of highly subcooled flow boiling in vertical upflow, Int. J. Heat Mass Tran. 136 (2019) 1199-1216. https://doi.org/10.1016/j.ijheatmasstransfer.2019.03.046