DOI QR코드

DOI QR Code

Conception and Modeling of a Novel Small Cubic Antenna Design for WSN

  • Gahgouh Salem (Microwave Electronics, Research Laboratory MERLAB FST, Faculty of Sciences, University El Manar) ;
  • Ragad Hedi (Microwave Electronics, Research Laboratory MERLAB FST, Faculty of Sciences, University El Manar) ;
  • Gharsallah Ali (Microwave Electronics, Research Laboratory MERLAB FST, Faculty of Sciences, University El Manar)
  • 투고 : 2024.02.05
  • 발행 : 2024.02.29

초록

This paper presents a novel miniaturized 3-D cubic antenna for use in wireless sensor network (WSN) application. The geometry of this antenna is designed as a cube including a meander dipole antenna. A truly omnidirectional pattern is produced by this antenna in both E-plane and H-plane, which allows for non-intermittent communication that is orientation independent. The operating frequency lies in the ISM band (centered in 2.45 GHz). The dimensions of this ultra-compact cubic antenna are 1.25*1.12*1cm3 which features a length dimension λ/11. The coefficient which presents the overall antenna structure is Ka=0.44. The cubic shape of the antenna is allowing for smart packaging, as sensor equipment may be easily integrated into the cube hallow interior. The major constraint of WSN is the energy consumption. The power consumption of radio communication unit is relatively high. So it is necessary to design an antenna which improves the energy efficiency. The parameters considered in this work are the resonant frequency, return loss, efficiency, bandwidth, radiation pattern, gain and the electromagnetic field of the proposed antenna. The specificity of this geometry is that its size is relatively small with an excellent gain and efficiency compared to previously structures (reported in the literature). All results of the simulations were performed by CST Microwave Studio simulation software and validated with HFSS. We used Advanced Design System (ADS) to validate the equivalent scheme of our conception. Input here the part of summary.

키워드

참고문헌

  1. Skiani, E. D., Mitilineos, S. A., & Thomopoulos, S. C. A., A study of the performance of wireless sensor networks operating with smart antennas. IEEE Antennas and Propagation Magazine, 54(3), 50-67, (2012) https://doi.org/10.1109/MAP.2012.6293950
  2. Seo, J. B., On minimizing energy consumption of duty-cycled wireless sensors. IEEE Communications Letters, 19(10), 1698-1701, (2015) https://doi.org/10.1109/LCOMM.2015.2459698
  3. Al Rasyid, M. U. H., Nadhori, I. U., & Alnovinda, Y. T., CO and CO 2 pollution monitoring based on wireless sensor network. In 2015 IEEE International Conference on Aerospace Electronics and Remote Sensing Technology (ICARES) (pp. 1-5). IEEE, (2015)
  4. Herbert, S., Loh, T. H., & Wassell, I., Assessment of a low-profile planar antenna for a wireless sensor network monitoring the local water distribution network. IET Wireless Sensor Systems, 4(4), 191-195, (2014) https://doi.org/10.1049/iet-wss.2014.0047
  5. Ellis, M. S., Zhao, Z., Wu, J., Nie, Z., & Liu, Q. H., Small planar monopole ultra-wideband antenna with reduced ground plane effect. IET Microwaves, Antennas & Propagation, 9(10), 1028-1034, (2015) https://doi.org/10.1049/iet-map.2014.0538
  6. Gahgouh, S., Ragad, H., & Gharsallah, A., Small size cubic antenna design for WSN. In 2017 18th International Conference on Sciences and Techniques of Automatic Control and Computer Engineering (STA) (pp. 670-673). IEEE, (2017).
  7. Chiu, C. Y., & Murch, R. D., Experimental results for a MIMO cube. In 2006 IEEE Antennas and Propagation Society International Symposium (pp. 2533-2536). IEEE, (2006)
  8. Marrocco, G., Gain-optimized self-resonant meander line antennas for RFID applications. IEEE Antennas and Wireless propagation letters, 2, 302-305, (2003). https://doi.org/10.1109/LAWP.2003.822198
  9. Le, D. T., Huynh, T. N. T., & Nguyen, T. K., Measurements on indoor channel characteristics using wideband MIMO antennas. In 2016 3rd National Foundation for Science and Technology Development Conference on Information and Computer Science (NICS) (pp. 44-49). IEEE, (2016)
  10. Pozar, D. M., Microwave engineering. John wiley & sons, (2011)
  11. Sato, Y., Campelo, F., & Igarashi, H., Meander line antenna design using an adaptive genetic algorithm. IEEE transactions on magnetics, 49(5), 1889-1892, (2013) https://doi.org/10.1109/TMAG.2013.2239979
  12. Milligan, T. A., Modern antenna design. John Wiley & Sons, (2005)
  13. Stojanovic, G., Zivanov, L., & Damjanovic, M., Compact form of expressions for inductance calculation of meander inductors. Serbian journal of electrical engineering, 1(3), 57-68, (2004) https://doi.org/10.2298/SJEE0403057S
  14. Bahl, I. J., Lumped elements for RF and microwave circuits. Artech house, (2003)
  15. Acuna, J. E., Rodriguez, J. L., & Obelleiro, F., Design of meander line inductors on printed circuit boards. International Journal of RF and Microwave Computer- Aided Engineering: Co-sponsored by the Center for Advanced Manufacturing and Packaging of Microwave, Optical, and Digital Electronics (CAMPmode) at the University of Colorado at Boulder, 11(4), 219-230, (2001)
  16. Wu, R. B., Kuo, C. N., & Chang, K. K., Inductance and resistance computations for three-dimensional multiconductor interconnection structures. IEEE Transactions on Microwave theory and Techniques, 40(2), 263-271, (1992) https://doi.org/10.1109/22.120098