참고문헌
- Samran A, Al-Ammari A, El Bahra S, Halboub E, Wille S, Kern M. Bond strength durability of self-adhesive resin cements to zirconia ceramic: An in vitro study. J Prosthet Dent 2019;121:477-84. https://doi.org/10.1016/j.prosdent.2018.03.026
- Kim MJ, Kim YK, Kim KH, Kwon TY. Shear bond strengths of various luting cements to zirconia ceramic: surface chemical aspects. J Dent 2011;39:795-803. https://doi.org/10.1016/j.jdent.2011.08.012
- Kim JH, Chae SY, Lee Y, Han GJ, Cho BH. Effects of multipurpose, universal adhesives on resin bonding to zirconia ceramic. Oper Dent 2015;40:55-62. https://doi.org/10.2341/13-303-L
- Go EJ, Shin Y, Park JW. Evaluation of the microshear bond strength of MDP-containing and Non-MDP-containing self-adhesive resin cement on zirconia restoration. Oper Dent 2019;44:379-85. https://doi.org/10.2341/18-132-L
- Kern M, Wegner SM. Bonding to zirconia ceramic: adhesion methods and their durability. Dent Mater 1998;14:64-71. https://doi.org/10.1016/S0109-5641(98)00011-6
- Passos SP, May LG, Barca DC, Ozcan M, Bottino MA, Valandro LF. Adhesive quality of self-adhesive and conventional adhesive resin cement to Y-TZP ceramic before and after aging conditions. Oper Dent 2010;35:689-96. https://doi.org/10.2341/10-157-L
- Nicoloso GF, Antoniazzi BF, Lenzi TL, Soares FZ, Rocha RO. Is there a best protocol to optimize bond strength of a universal adhesive to artificially induced caries-affected primary or permanent dentin? J Adhes Dent 2016;18:441-6.
- Antonucci JM, Fowler BO, Dickens SH, Richards ND. Novel dental resins from trialkoxysilanes and dental monomers by in situ formation of oligomeric silyl ethers and silsesquioxanes. Polym Prepr 2002;43:633-4.
- Marghalani HY. Sorption and solubility characteristics of self-adhesive resin cements. Dent Mater 2012;28:e187-98. https://doi.org/10.1016/j.dental.2012.04.037
- Dimitriadi M, Zinelis S, Zafiropoulou M, Silikas N, Eliades G. Self-etch silane primer: reactivity and bonding with a lithium disilicate ceramic. Materials 2020;13:641.
- Asmussen E, Peutzfeldt A. Resin composites: strength of the bond to dentin versus surface energy parameters. Dent Mater 2005;21:1039-43. https://doi.org/10.1016/j.dental.2004.12.004
- Kwon SM, Kim YK, Kwon TY. Challenging the resin-zirconia interface by thermal cycling or mechanical load cycling or their combinations. Appl Sci 2020;10:7352.
- Kern M, Barloi A, Yang B. Surface conditioning influences zirconia ceramic bonding. J Dent Res 2009;88:817-22. https://doi.org/10.1177/0022034509340881
- Van Oss CJ, Giese RF. The hydrophilicity and hydrophobicity of clay minerals. Clays Clay Miner 1995;43:474-7. https://doi.org/10.1346/CCMN.1995.0430411
- Yang B, Barloi A, Kern M. Influence of air-abrasion on zirconia ceramic bonding using an adhesive composite resin. Dent Mater 2010;26:44-50. https://doi.org/10.1016/j.dental.2009.08.008
- ISO 29022. Dentistry-Adhesion-Notche-dedge shear bond strength test. International Standards Organization (ISO); Geneva; Switzerland, 2013.
- Kwon SM, Min BK, Son JS, Kim KH, Kwon TY. Durability of resin bond strength to dental noble metal-ceramic alloys conditioned with novel mercapto silane-based primer systems. J Adhes Sci Technol 2016;30:506-19. https://doi.org/10.1080/01694243.2015.1110008
- Siboni S, Della Volpe C. Acid-base theory of adhesion: A critical review. Rev Adhes Adhes 2015;3:253-310. https://doi.org/10.7569/RAA.2015.097307
- Lee LH. Adhesion and surface-hydrogen-bond components for polymers and biomaterials. J Adhes 1998;67:1-18. https://doi.org/10.1080/00218469808011096
- Kim YK, Son JS, Kim KH, Kwon TY. Influence of surface energy parameters of dental self-adhesive resin cements on bond strength to dentin. J Adhes Sci Technol 2013;27:1778-89. https://doi.org/10.1080/01694243.2012.761057
- Beatty MW, Swartz ML, Moore BK, Phillips RW, Roberts TA. Effect of crosslinking agent content, monomer functionality, and repeat unit chemistry on properties of unfilled resins. J Biomed Mater Res 1993;27:403-13. https://doi.org/10.1002/jbm.820270314
- Gale MS, Darvell BW. Thermal cycling procedures for laboratory testing of dental restorations. J Dent 1999;27:89-99. https://doi.org/10.1016/S0300-5712(98)00037-2
- Zhang F, Inokoshi M, Vanmeensel K, Van Meerbeek B, Naert I, Vleugels J. Lifetime estimation of zirconia ceramics by linear ageing kinetics. Acta Mater 2015;92:290-8. https://doi.org/10.1016/j.actamat.2015.04.001
- Luthy H, Loeffel O, Hammerle CH. Effect of thermocycling on bond strength of luting cements to zirconia ceramic. Dent Mater 2006;22:195-200. https://doi.org/10.1016/j.dental.2005.04.016
- Ito S, Hashimoto M, Wadgaonkar B, Svizero N, Carvalho RM, Yiu C, Rueggeberg FA, Foulger S, Saito T, Nishitani Y, Yoshiyama M, Tay FR, Pashley DH. Effects of resin hydrophilicity on water sorption and changes in modulus of elasticity. Biomaterials 2005;26:6449-59. https://doi.org/10.1016/j.biomaterials.2005.04.052
- Kerby RE, Knobloch LA, Schricker S, Gregg B. Synthesis and evaluation of modified urethane dimethacrylate resins with reduced water sorption and solubility. Dent Mater 2009;25:302-13. https://doi.org/10.1016/j.dental.2008.07.009
- Wolfart M, Lehmann F, Wolfart S, Kern M. Durability of the resin bond strength to zirconia ceramic after using different surface conditioning methods. Dent Mater 2007;23:45-50. https://doi.org/10.1016/j.dental.2005.11.040
- Salem RST, Ozkurt-Kayahan Z, Kazazoglu E. In vitro evaluation of shear bond strength of three primer/resin cement systems to monolithic zirconia. Int J Prosthodont 2019;32:519-25. https://doi.org/10.11607/ijp.6258