DOI QR코드

DOI QR Code

An experimental and numerical study on the local buckling of cold-formed steel castellated I-Beam stiffened with oval castellation

  • S. Prabhakaran (Department of Civil Engineering, Sona College of Technology) ;
  • R. Malathy (Department of Civil Engineering, Sona College of Technology) ;
  • M. Kasiviswanathan (Department of Civil Engineering, Sona College of Technology)
  • 투고 : 2023.02.08
  • 심사 : 2024.04.02
  • 발행 : 2024.04.25

초록

Cold-formed steel (CFS) I sections are increasingly being used as load-bearing components in building constructions, and such I sections frequently incorporate web holes to facilitate service installation. The economical and structural advantages of these elements have prompted many researchers to investigate the behavior of such structures. Despite numerous studies on the buckling stability of castellated beams, there is a notable absence of experimental investigation into oval castellated beams with stiffeners. This study examines the local buckling of cold-formed steel castellated I-beams stiffened with oval constellations through experimental and numerical analysis. Four specimens are fabricated with and without stiffeners, including parallel, perpendicular, and intersecting types attached to the web portion of the beam, along with cross stiffeners for the oval-shaped openings at the beam ends. Additionally, a numerical model is developed to predict the behavior of castellated beams with oval openings up to failure, considering both material and geometric nonlinearities. Codal analysis is performed using the North American specification for cold-formed steel AISI S-100 and the Australian/New Zealand design code AS/NZS 4600. The anticipated outcomes from numerical analysis, experimental research, and codal analysis are compared and presented. It will be more helpful to the preliminary designers.

키워드

참고문헌

  1. Agrawal, V. and Bhatt, D. (2017), "A design comparison of castellated beam for different parameters", Kalpa Publications in Civil Engineering, 1, 403-409.  https://doi.org/10.29007/cz65
  2. AISI- SI 100 (2007), North American Specification for the Design of Cold-Formed Steel Structural Members and Specifications.
  3. ANSYS (2003), User's Manual (Version 15), ANSYS, Inc., Canonsburg, PA. 
  4. AS/NZS 4600 (2005), Australian/New Zealand Standard-Cold-Formed Steel Structures.
  5. De'nan, F. and Sheng, L.Y. (2019), "Bending performance of cold formed steel structural member with perforated section in housing framing system", IOP Conf. Ser.: Mater. Sci. Eng., 572(1), 012081. https://doi.org/10.1088/1757-899x/572/1/012081. 
  6. Doori, S. and Noori, A.R. (2021), "Finite element approach for the bending analysis of castellated steel beams with various web openings", ALKu Fen Bilimleri Dergisi, 3(2), 38-49. https://doi.org/10.46740/alku.883187. 
  7. Erturkmen, D. and Noori, A.R. (2023), "Bending analysis of curved castellated beams via the finite element method", Cukurova universitesi Muhendislik Fakultesi Dergisi, 38(1), 73-84. https://doi.org/10.21605/cukurovaumfd.1273712. 
  8. Kase Viswanathan, S.B. and Prabhakaran, S. (2019), "Experimental study on behavior of cold formed steel castellated beam", Int. Res. J. Eng. Technol. (IRJET), 06(04), 3753-3756. 
  9. Mehetre, A.J. and Talikoti, R.S. (2020), "Effect of fillet radii on moment carrying capacity of sinusoidal web opening castellated steel beams in comparison with hexagonal web openings", Iran. J. Sci. Technol., Trans. Civil Eng., 44(S1), 151-161. https://doi.org/10.1007/s40996-020-00378-w. 
  10. Morkhade, S.G., Lokhande, R.S., Gund, U.D., Divate, A.B., Deosarkar, S.S. and Chavan, M.U. (2020), "Structural behaviour of castellated steel beams with reinforced web openings", Asian J. Civil Eng., 21(6), 1067-1078. https://doi.org/10.1007/s42107-020-00262-y. 
  11. Nair, G.S. and Pillai, P.S. (2018), "Castellated beam with diagonal stiffeners along hexagonal cuts", Int. Res. J. Eng. Technol., 5(06), 2879-2883. 
  12. Prabhakaran, S. and Maboob, S.A. (2021), "Numerical Analysis and experimental investigation on behavior of cold-formed steel castellated beam with diamond castellation", Int. J. Steel Struct., 21(3), 1082-1091. https://doi.org/10.1007/s13296-021-00494-x. 
  13. Tudjono, S. and Han, A.L. (2017), "Analysis of castellated steel beam with oval openings", IOP Conf. Ser.: Mater. Sci. Eng., 271, 012104. https://doi.org/10.1088/1757-899x/271/1/012104.