대한안전경영과학회지 (Journal of the Korea Safety Management & Science)

  • 제26권1호
  • /
  • Pages.39-44
  • /
  • 2024
  • /
  • 1229-6783(pISSN)
  • /
  • 2288-1484(eISSN)
대한안전경영과학회 (Korea Safety Management & Science)
권호 표지
DOI QR코드

DOI QR Code

불량탄 안전사고 예방을 위한 탄약 수명 예측 연구 리뷰

A Review on Ammunition Shelf-life Prediction Research for Preventing Accidents Caused by Defective Ammunition

  • 정영진 (인하대학교 산업경영공학과) ;
  • 홍지수 (인하대학교 산업경영공학과) ;
  • 김솔잎 (한화에어로스페이스 PGM 연구소) ;
  • 강성우 (인하대학교 산업경영공학과)
  • Young-Jin Jung (Department of Industrial Engineering, INHA University) ;
  • Ji-Soo Hong (Department of Industrial Engineering, INHA University) ;
  • Sol-Ip Kim (PGM R&D Institute, Hanwha Aerospace) ;
  • Sung-Woo Kang (Department of Industrial Engineering, INHA University)
  • 투고 : 2024.03.06
  • 심사 : 2024.03.18
  • 발행 : 2024.03.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

In order to prevent accidents via defective ammunition, this paper analyzes recent research on ammunition life prediction methodology. This workanalyzes current shelf-life prediction approaches by comparing the pros and cons of physical modeling, accelerated testing, and statistical analysis-based prediction techniques. Physical modeling-based prediction demonstrates its usefulness in understanding the physical properties and interactions of ammunition. Accelerated testing-based prediction is useful in quickly verifying the reliability and safety of ammunition. Additionally, statistical analysis-based prediction is emphasized for its ability to make decisions based on data. This paper aims to contribute to the early detection of defective ammunition by analyzing ammunition life prediction methodology hereby reducing defective ammunition accidents. In order to prepare not only Korean domestic war situation but also the international affairs from Eastern Europe and Mid East countries, it is very important to enhance the stability of organizations using ammunition and reduce costs of potential accidents.

키워드

과제정보

이 연구는 2022년도 정부(방위사업청)의 재원으로 국방기술진흥연구소의 지원을 받아 수행된 연구임(KRIT-CT-22-081, 무기체계 CBM+특화연구센터).

참고문헌

  1. S. H. Gu, S. H. Cho, S. H. Song(2023), "A Study on Improvement Plans for Bulletproof Test Lab to Secure Safety and Efficiency." Journal of the Korea Academia-Industrial cooperation Society, 24(7): 122-130. https://doi.org/10.5762/KAIS.2023.24.7.122
  2. J. H. Lee, H. C. Jung, J. S. Park(2020), "Research on the Decrease of Dud Ammunition Rate of Grenade Fuzes of Remote Controlled Munition System(For practice) through Quality Improvement." Journal of the Korea Academia-Industrial cooperation Society, 21(3):328-334.
  3. Y. C. Kang, J. O. Choi(2000), "A Study on Controlling the Effects of the Internal Explosion of the Explosive Disposal Structure." Journal of the Korea Institute of Military Science and Technology, 3(2):204-212.
  4. S. W. Park, J. H. Jun, H. S. Choi, Y. J. Park(2020), "Study for Reducing Safety Distance by Installing Ammunition Storage Facility in Underground." J. Korea Inst. Build. Constr., 20(3):253-260.
  5. S. H. Jeon, S. H., Lee, D. Y. Kim, S. H. Oh(2011), "An Analysis of the ASRP's Effects on Combat Strength." Korean Journal of Military Art and Science, 67(2):161-178.
  6. Ministry of National Defense(2023), "National Defense Ammunition and Explosives Safety Management Instructions." Ministry of Government Legislation, Korean Law Information Center.
  7. S. C. Choi, Y. H. Bae, D. E. Kim, D. E.(2005), "A Study on the Development of ASRP for Improvement of the Stockpile Ammuntion Reliability." Journal of the Korea Institute of Military Science and Technology, 8(4):32-40.
  8. J. H. Kim, B. H. Lee, K. M. Kim, K. Y. Shin, W. W. Lee(2019), "Gaussian Mixture based K2 Rifle Chamber Pressure Modeling of M193 and K100 Bullets." Journal of the KIMST, 22(1):27-34.
  9. K. S. Yoon, W. S. Kim, J. H. Choi(2023), "A study on the Evaluation Criteria of ASRP for the Muzzle Velocity of Cartridge 81mm, HE." Journal of the Korea Academia-Industrial cooperation Society, 24(10):498-507.
  10. S. H. Jang, H. J. Chun, I. H. Cho, K. S. Yoon, M. J. Kang(2018), "A study on the factors affecting shelf-life for 60, 81mm mortar ammunition." The Korean Journal of Applied Statistics, 31(5):611-620. https://doi.org/10.5351/KJAS.2018.31.5.611
  11. J. H. Ahn, J. M. Ma(2020), "A Study on the Optimal Sampling for Prediction Failure Rate of One-Shot Weapon Systems." Journal of the Korea AcademiaIndustrial cooperation Society, 21(2):366-372.
  12. S. J. Back, Y. K. Son, N. J. Kim, T. S. Kwon(2016), "Storage Life Estimation of Next Infrared Flare Material." Journal of the KIMST, 19(3):311-318.
  13. S. J. Back, Y. K. Son, S. H. Lim, I. H. Myung(2015), "Storage Life Estimation of Magnesium Flare Material for 81mm Illuminating Projectile." Journal of the KIMST, 18(3):267-274.
  14. J. Y. Seo, B. H. Cheon, N. R. Lee(2022), "Rapid Analysis Method for Stabilizer Content in Propellants using Heat Stability Test." Journal of the Korea Academia-Industrial cooperation Society, 23(12):312-317.
  15. J. Y, Seo, B. H. Cheon, D. H. Kim, M. J. Bae(2023), "Analysis of Propellant Stabilizer Degradation Products using High Performance Liquid Chromatography and Mass Spectrometer." Journal of the Korea Academia-Industiral cooperation Society, 24(11):269-278. https://doi.org/10.5762/KAIS.2023.24.11.269
  16. J. H. Lee, H. S. Jung, J. C. Lee(2022), "An Analysis on the ammuntion malfunction and assessment plan of 155mm Smoke for howitzer." Journal of the Korea Academia-Industrial cooperation Society, 23(8): 202-210. https://doi.org/10.5762/KAIS.2022.23.8.202
  17. J. H. Lee, J. S. Choi(2020), "A Study on Reliability and Shelf-Life of DELAY M9." Journal of the Korea Academia-Industrial cooperation Society, 21(9): 64-72.
  18. J. C. Lee, J. H. Lee, H. S. Jung(2020), "A Study on the shelf-life of IR screening smoke launcher grenade." Journal of the Korea AcademiaIndustrial cooperation Society, 21(4):437-445.
  19. D. N. Lee, K. S. Yoon(2018), "A Study on the Estimation of Shelf Life for Fuze MTSQ KM577A1 from ASRP Data." Journal of Applied Reliability, 18(1):56-65. https://doi.org/10.33162/JAR.2018.03.18.1.56
  20. M, J. Choi, H. J. Park, J. K. Yang, J. H. Baek(2014), "A Study on the Shelf-Life Prediction of the Domestic Single Base Propellants Ammunition: Based on 105mm High Explosive Propellants." Society of Korea Industrial and Systems Engineering, 37(3):36-42. https://doi.org/10.11627/jkise.2014.37.3.36
  21. W. S. Kim, S. H. Cho, K. S. Yoon(2024), "A study on The Shelf-life of Catridge, 81MM HighExplosive for Mortar Using Regression Analysis." Journal of the Korea Academia-Industrial cooperation Society, 25(1):122-131.
  22. J. W. Lee, Y. K. Hong(2012), "A study on the effective management of artillery ammunition using ASRP data -The case of test interval determination, shelfe-life prediction, force effectiveness analysis-." Journal of the Korea AcademiaIndustrial cooperation Society, 13(9):4349-4358. https://doi.org/10.5762/KAIS.2012.13.9.4349
  23. S. H. Park, J. H. Kim(2012), "Estimation of Shelf Life for Propellant KM6 by Using Gamma Process Model." Journal of the Korean Society of Propulsion Engineers, 16(4):33-41.
  24. S. H. Park, J. H. Kim(2013), "A Study on the Storage Life Estimation Method for Decrease of Muzzle Velocity using Gamma Process Model." Journal of the Korea Institute of Military Science and Technology, 16(5):639-645, https://doi.org/10.9766/KIMST.2013.16.5.639
  25. D. N. Lee, K. S. Yoon, Y. C. Noh(2020), "Study on Improving Learning Speed of Artificial Neural Network Model for Ammunition Stockpile Reliability Classification." Journal of the Korea Academia-Industrial cooperation Society, 21(6): 374-382.