DOI QR코드

DOI QR Code

Curvature ductility of confined HSC beams

  • Bouzid Haytham (Department of Sciences and Technology, Tissemsilt University) ;
  • Idriss Rouaz (National Center of Studies and Integrated Research on Building Engineering (CNERIB)) ;
  • Sahnoune Ahmed (Department of Sciences and Technology, Tissemsilt University) ;
  • Benferhat Rabia (Laboratory of Geomatics and Sustainable Development, Tiaret University) ;
  • Tahar Hassaine Daouadji (Laboratory of Geomatics and Sustainable Development, Tiaret University)
  • 투고 : 2023.01.19
  • 심사 : 2024.03.19
  • 발행 : 2024.03.25

초록

The present paper investigates the curvature ductility of confined reinforced concrete (RC) beams with normal (NSC) and high strength concrete (HSC). For the purpose of predicting the curvature ductility factor, an analytical model was developed based on the equilibrium of internal forces of confined concrete and reinforcement. In this context, the curvatures were calculated at first yielding of tension reinforcement and at ultimate when the confined concrete strain reaches the ultimate value. To best simulate the situation of confined RC beams in flexure, a modified version of an ancient confined concrete model was adopted for this study. In order to show the accuracy of the proposed model, an experimental database was collected from the literature. The statistical comparison between experimental and predicted results showed that the proposed model has a good performance. Then, the data generated from the validated theoretical model were used to train the artificial neural network (ANN) prediction model. The R2 values for theoretical and experimental results are equal to 0.98 and 0.95, respectively which proves the high performance of the ANN model. Finally, a parametric study was implemented to analyze the effect of different parameters on the curvature ductility factor using theoretical and ANN models. The results are similar to those extracted from experiments, where the concrete strength, the compression reinforcement ratio, the yield strength, and the volumetric ratio of transverse reinforcement have a positive effect. In contrast, the ratio and the yield strength of tension reinforcement have a negative effect.

키워드

참고문헌

  1. ACI 318-19 (2019), Building Code Requirements for Structural Concrete and Commentary, American Concrete Institute, Farmington Hills, MI, USA.
  2. Aldabagh, S., Farid, A. and Sherif, Y. (2018), "Effect of types of concrete on flexural behavior of beams reinforced with high-strength steel bars", ACI Struct. J., 115(2), 351-364. https://doi.org/10.14359/51701105
  3. Al-Kamal, M.K. (2019), "Nominal axial and flexural strengths of high-strength concrete columns", Comput. Concrete, 24(1), 85-94. https://doi.org/10.12989/cac.2019.24.1.085.
  4. Bengar, A.H., Abdollahtabar, M. and Shayanfar, J. (2016), "Predicting the ductility of RC beams using nonlinear regression and ANN", Iran. J. Sci. Technol., Trans. Civil Eng., 40, 297-310. https://doi.org/10.1007/s40996-016-0033-0.
  5. Bensattalah, A., Rabia, B. and Daouadji, T.H. (2023), "Predicting and analysis of interfacial stress distribution in RC beams strengthened with composite sheet using artificial neural network", Struct. Eng. Mech., 87(6), 517-527. https://doi.org/10.12989/sem.2023.87.6.517.
  6. Bouzid, H. and Kassoul, A. (2016), "Curvature ductility of high strength concrete beams according to Eurocode 2", Struct. Eng. Mech., 58(1), 1-19. https://doi.org/10.12989/sem.2016.58.1.001.
  7. Bouzid, H. and Kassoul, A. (2018), "Curvature ductility prediction of high strength concrete beams", Struct. Eng. Mech., 66(2), 195-201. https://doi.org/10.12989/sem.2018.66.2.195.
  8. Bouzid, H., Rabia, B. and Daouadji, T.H. (2021), "Deflection ductility of RC beams under mid-span load", Struct. Eng. Mech., 80(5), 585-594. https://doi.org/10.12989/sem.2021.80.5.585.
  9. Breccolotti, M., Annibale, L.M. and Bruno, R.B. (2019), "Curvature ductility of biaxially loaded reinforced concrete short columns", Eng. Struct., 200, 109669. https://doi.org/10.1016/j.engstruct.2019.109669.
  10. Carmo, R.N.F., Costa, H., Simoes, T., Lourenco, C. and Andrade, D. (2013), "Influence of both concrete strength and transverse confinement on bending behavior of reinforced LWAC beams", Eng. Struct., 48, 329-341. https://doi.org/10.1016/j.engstruct.2012.09.030.
  11. Debernardi, P.G. and Taliano, M. (2002), "On evaluation of rotation capacity for reinforced concrete beams", ACI Struct. J., 99(3), 360-368.
  12. Eurocode 2: EN 1992-1-1 (2003), Design of Concrete StructuresPart1-1: General Rules and Rules for Buildings, European Committee for Standardization, Brussels, Belgium.
  13. Eurocode 8 EN 1998-1 (2003), Design of Structures for Earthquake Resistance Part 1: General Rules, Seismic Actions and Rules for Buildings, European Committee for Standardization, Brussels, Belgium.
  14. Gaboitaolelwe, J., Zungeru, A.M., Yahya, A., Lebekwe, C.K., Vinod, D.N. and Salau, A.O. (2023), "Machine learning based solar photovoltaic power forecasting: A review and comparison", IEEE Access, 11, 40820-40845. https://doi.org/10.1109/ACCESS.2023.3270041.
  15. Guadagnuolo, M., Alfonso, D., Anna, T. and Giuseppe, F. (2020) "Experimental behavior of concrete columns confined by transverse reinforcement with different details", Open Constr. Build. Technol. J., 14, 250-265. https://doi.org/10.2174/1874836802014010250.
  16. Gultekin, A. and Mehmet, S.O. (2020), "Displacement prediction of precast concrete under vibration using artificial neural networks", Struct. Eng. Mech., 74(4), 559-565. https://doi.org/10.12989/sem.2020.74.4.559.
  17. Halima, A., Kassoul, A. and Bouzid, H. (2019), "New model for confinement of reinforced concrete columns with an ultra-high strength close to 200 MPa", Eng. Struct., 199, 109594. https://doi.org/10.1016/j.engstruct.2019.109594.
  18. Kent, D.C. and Park, R. (1971), "Flexural members with confined concrete", ASCE Proc., 97(ST7), 1969-1990. https://doi.org/10.1061/JSDEAG.0002957
  19. Konstantinos, G.K. and Morfidis, K.E. (2020), "Optimization of the seismic performance of masonry infilled R/C buildings at the stage of design using artificial neural networks", Struct. Eng. Mech., 75(3), 295-309. https://doi.org/10.12989/sem.2020.75.3.295.
  20. Lee, T.K. and Pan, A.D.E. (2003), "Estimating the relationship between tension reinforcement and ductility of reinforced concrete beam sections", Eng. Struct., 25(8), 1057-1067. https://doi.org/10.1016/S0141-0296(03)00048-8.
  21. Lin, C.H. and Lee, F.S. (2001), "Ductility of high-performance concrete beams with high strength lateral reinforcement", ACI Struct. J., 98(4), 600-608.
  22. Ma, C.K., Awang, A.Z., Garcia, R., Omar, W. and Pilakoutas, K. (2016), "Behaviour of over-reinforced high-strength concrete beams confined with post-tensioned steel straps-an experimental investigation", Struct. Concrete, 17, 768-777. https://doi.org/10.1002/suco.201500062.
  23. Mohammad, M., Suhatril, M., Shariati, M. and Ghanbari, F. (2013), "Ductility and strength assessment of HSC beams with varying of tensile reinforcement ratios", Struct. Eng. Mech., 48(6), 833-848. https://doi.org/10.12989/sem.2013.48.6.833.
  24. Mortda, M.S. and Gyorgy, K. (2023), "Using Artificial Neural Network in the reverse design of a composite sandwich structure", Struct. Eng. Mech., 85(5), 635-644. https://doi.org/10.12989/sem.2023.85.5.635.
  25. Nogueira, C.G. and Rodrigues, I.D. (2017), "Ductility analysis of RC beams considering the concrete confinement effect produced by the shear reinforcement: A numerical approach", Lat. Am. J. Solid. Struct., 14(13), 2342-2372. https://doi.org/10.1590/1679-78253904.
  26. Park, R. and Ruitong, D. (1988), "Ductility of doubly reinforced beam sections", Struct. J., 85(2), 217-225.
  27. Pecce, M. and Fabbrocino, G. (1999), "Plastic rotation capacity of beams in normal and high-performance concrete", ACI Struct. J., 96(2), 290-297.
  28. Priastiwi, Y.A., Iswandi, I. and Nuroji, A.H. (2014), "Behavior of ductile beam with addition confinement in compression zone", Procedia Eng., 95, 132-138. https://doi.org/10.1016/j.proeng.2014.12.172.
  29. Radnic, J., Markic, R., Grgic, N. and Cubela, D. (2019), "New approach for ductility analysis of partially prestressed concrete girders", Struct. Eng. Mech., 70(3), 257-267. https://doi.org/10.12989/sem.2019.70.3.257.
  30. Rashid, M.A. and Mansur, M.A. (2005), "Reinforced high-strength concrete beams in flexure", ACI Struct. J., 102(3), 462-471.
  31. Scott, B.D., Park, R. and Priestley, M.J.N. (1982), "Stress-strain behavior of concrete confined by overlapping hoops at low and high strain rates", J. Proc., 79(1), 13-27.
  32. Spadea, G., Bencardino, F. and Swamy, R.N. (1998), "Structural behavior of composite RC beams with externally bonded CFRP", J. Compos. Constr., 2(3), 132-137. https://doi.org/10.1061/(ASCE)1090-0268(1998)2:3(132).