참고문헌
- Wang, X., Hou, J., Guo, H., Wang, Y., Sun, Y., & Teng, B. "A Miner's rule based fatigue life prediction model for combined high and low cycle fatigue considering loading interaction effect", Fatigue & Fracture of Engineering Materials & Structures, 46(12), 4525-4540, 2023 https://doi.org/10.1111/ffe.14147
- Bonaiti, L., & C. Gorla. "Estimation of gear SN curve for tooth root bending fatigue by means of maximum likelihood method and statistic of extremes." International Journal of Fatigue 153:10645, 2021.
- S. G. Han, Y. I. Shin, C. H. Yoon, & C. K. Song, "Strength and Durability Analysis of the Double Planetary Gears", Journal of the Korean Society of Manufacturing Process Engineers, 13(5), 28-34, 2014.
- J. H. Lee, D. S. Kim, B. J. Sung & T. Y. Nam, "Reliability Assessment of a Planetary Gearbox for Driving the Cutter Head of TBM." Proceedings of the Korean Society of Mechanical Engineers Spring Conference, 2018.
- J. S. Huh, K. H. Lee, Y. J. Park, M. K. Kim, & J. H. Kim, "Development of a High-Speed Reduction Gearbox for a Small Gas Turbine Engine of an Unmanned Aerial Vehicle", Transactions of the Korean Society of Mechanical Engineers - A, 45(2), 167-173, 2021. https://doi.org/10.3795/KSME-A.2021.45.2.167
- Y. B. Lee, G. C. Lee, J. J. Lee, S. Y. Lim, W. J. Kim, & K. M. Kim, "A Study on the Acceleration Durability Test of In-Wheel Drive Gearbox for Military Special Vehicles", Journal of Drive and Control, 19(3), 32-38, 2022. https://doi.org/10.7839/KSFC.2022.19.3.032
- Karpat, F., Ekwaro-Osire, S., Cavdar, K., & Babalik, F. C. "Dynamic analysis of involute spur gears with asymmetric teeth", International Journal of Mechanical Sciences, 50(12), 1598-1610, 2008. https://doi.org/10.1016/j.ijmecsci.2008.10.004
- Amarnath, M., Chandramohan, S., & Seetharaman, S. "Experimental investigations of surface wear assessment of spur gear teeth", Journal of Vibration and Control, 18(7), 1009-1024, 2012. https://doi.org/10.1177/1077546311399947
- Bravo, A., Koffi, D., Toubal, L., & Erchiqui, F. "Life and damage mode modeling applied to plastic gears", Engineering Failure Analysis, 58, 113-133, 2015. https://doi.org/10.1016/j.engfailanal.2015.08.040
- Zorko, D., Kulovec, S., Duhovnik, J., & Tavcar, J. "Durability and design parameters of a Steel/PEEK gear pair", Mechanism and Machine Theory, 140, 825-846, 2019 https://doi.org/10.1016/j.mechmachtheory.2019.07.001
- Zhang, B., Liu, H., Zhu, C., & Li, Z. "Numerical simulation of competing mechanism between pitting and micro-pitting of a wind turbine gear considering surface roughness", Engineering Failure Analysis, 104, 1-12, 2019. https://doi.org/10.1016/j.engfailanal.2019.05.016
- Lu, Z., Liu, H., Zhang, R., Zhu, C., Shen, Y., & Xin, D. "The simulation and experiment research on contact fatigue performance of acetal gears", Mechanics of Materials, 154, 103719, 2021.
- Lu, Z., Li, Z., Liu, H., Wei, P., Xia, B., & Ye, M. "An accelerated fatigue test method of polymer gears based on thermostress conversion relation", Engineering Fracture Mechanics, 266, 108388, 2022.
- J. S. Kim, J. H. Sohn, M. G. Kim, G. H Lee, & S. C Kim, "Analysis of the Transmission Error of Spur Gears Depending on the Finite Element Analysis Condition", Journal of Computational Structural Engineering Institute of Korea, 36(2), 121-130, 2023. https://doi.org/10.7734/COSEIK.2023.36.2.121
- Y. B. Lee, & Han. Ju. Yoo, "Study of a Durability Test for Single-input Multi-output Power Take-off Gearboxes", Journal of Drive and Control, 14(1), 29-34, 2017. https://doi.org/10.7839/KSFC.2017.14.1.029
- Jun. Y. Kim, Y. J. Yu, & C. H. Lee, "Accelerated Life Test Selection Study for Life Evaluation of Engine Type Drive Axle for Forklift", Journal of Drive and Control, 20(3), 9-14, 2023. https://doi.org/10.7839/KSFC.2023.20.3.009
- J. G. Kang, Y. R. Yoo, & K. T. Park, "Structural Safety and Critical Speed Analysis of 2-Speed Shift Reducer", Journal of Drive and Control, 19(4), 1-9, 2022. https://doi.org/10.7839/KSFC.2022.19.4.001
- Y. B. Lee, & S. H. Han, "Development of device measuring very high torque via torque arm with attached load cells", Journal of Drive and Control, 7(1), 53-57, 2010.
- J. S. Shin, J. H. Kim, J. G. Kim, & M. Jin, "Development of a Lifetime Test Bench for Robot Reducers for Fault Diagnosis and Failure Prognostics", Journal of Drive and Control, 16(3), 33-41, 2019. https://doi.org/10.7839/KSFC.2019.16.3.033