DOI QR코드

DOI QR Code

Dynamic fault analysis model development for vacuum circuit breaker action

  • Yan Zhang (College of Electrical Engineering, Hebei University of Science and Technology) ;
  • Xinzhe Fu (College of Electrical Engineering, Hebei University of Science and Technology) ;
  • Zhaolei Wang (State Grid Hebei Extra High Voltage Company) ;
  • Hsiung‑Cheng Lin (Department of Electronic Engineering, National Chin-Yi University of Technology) ;
  • Fang Wang (College of Electrical Engineering, Hebei University of Science and Technology) ;
  • Shuai Yang (College of Electrical Engineering, Hebei University of Science and Technology)
  • Received : 2023.10.09
  • Accepted : 2024.05.14
  • Published : 2024.12.20

Abstract

Abnormal breaking, rejection, or misoperation in vacuum circuit breakers primarily occurs due to failures of the breaking solenoid mechanism. Therefore, a comprehensive analysis model for the operating state of breaking solenoids is of great significance in terms of power system stability. For this reason, a dynamic simulation model of this issue is proposed in this study. First, the operating principle of a breaking solenoid is deduced to establish the analysis model. Thus, the operation state of the moving iron core under normal conditions is analyzed. Second, the analog current waveform characteristics under fault situations are compared with those under normal situations. Then the effects of fault circuit breaker breaking are systematically analyzed. Finally, an analog shunt experiment is conducted on circuit breaker shunt solenoid faults, including poor contact, core jamming, and inter-turn short circuit faults. The experimental shunt coil current under faults is collected and compared with simulation results. The model performance is verified through the circuit breaker breaking fault experiments. Accordingly, it can provide a crucial solution for circuit breaker solenoid mechanisms in fault analysis, monitoring, and evaluation.

Keywords

Acknowledgement

This study was supported by the Natural Science Foundation of Hebei Province (E2019208443), the Science and Technology Research Programme of Higher Education Institutions in Hebei Province (ZD2021202), and the National Innovation and Entrepreneurship Training Programme for College Students (202310082004).

References

  1. Cheng, X.-Z., Zhu, X.-I., Du, Y.-B., Wang, C.: High voltage circuit breaker fault diagnosis based on neural fuzzy petri nets. Trans. China Electrotech. Soc. 33(11), 2535–2544 (2018)
  2. Yang, Q.-Y., Ruan, J.-J., Zhuang, Z.-J.: Fault diagnosis of circuit breakers based on time–frequency and chaotic vibration analysis. IET Gener. Transm. Distrib. 14(7), 1214–1221 (2020) https://doi.org/10.1049/iet-gtd.2019.0985
  3. Wan, S.-T., Ma, X.-L., Chen, L., Dou, L.-J., Lv, P.-R., Zhou, G.-W.: State evaluation and fault diagnosis of high-voltage circuit breaker based on short-time energy entropy ratio of vibration signal and DTW. High Voltage Eng. 46(12), 4249–4257 (2020)
  4. Yang, Q.-Y., Ruan, J.-J., Zhuang, Z.-J., Huang, D.-C.: Fault identification for circuit breakers based on vibration measurements. IEEE Trans. Instrum. Meas. 69(7), 4154–4164 (2020) https://doi.org/10.1109/TIM.2019.2946470
  5. Wang, Y.-X., Yan, J., Ye, X.-Y., Jing, Q.-Z., Wang, J.-H., Geng, Y.-S.: Few-shot transfer learning with attention mechanism for high-voltage circuit breaker fault diagnosis. IEEE Trans. Ind. Appl. 58(3), 3353–3360 (2022) https://doi.org/10.1109/TIA.2022.3159617
  6. Shao, Y., Wu, J.W., Ma, S.L., Cheng, Y., Feng, Y., Yang, N., Yang, D.G.: Integrated SVM method with am-relieff feature selection for mechanical fault diagnosis of high voltage circuit breakers. Proc. of the CSEE. 41(08), 2890–2901 (2021)
  7. Wang, Y.-X., Yan, J., Wang, J.-H., Geng, Y.-S.: Mechanical fault diagnosis of high voltage circuit breaker based on feature fusionmetric learning. Chinese J. Sci. Instr. 43(09), 98–105 (2022)
  8. Zhang, J.-Z., Wu, Y.-B., Xu, Z., Din, Z., Chen, H.: Fault diagnosis of high voltage circuit breaker based on multi-sensor information fusion with training weights. Measurement 192(31), 861–870 (2022) https://doi.org/10.1016/j.measurement.2022.110894
  9. Fan, H., Li, X.-W., Su, H.-B., Chen, L., Shi, Z.-Q.: Research on circuit breaker fault diagnosis method based on principal component analysis⁃support vector machine optimization model. High Voltage Apparatus. 56(6), 143–151 (2020)
  10. Zhang, H., Zhao, L.-H., Jing, W., Yang, W., Jiang, H.-Y., Zhu, L.-L., Rong, Q., Fu, R.-R.: Condition assessment of the circuit breaker operating mechanism based on relief feature vector optimization and SOM network. High Volt. Appar. 53(9), 240–246 (2017)
  11. Sun, Y.-S., Zhang, W.-T., Zhang, Y.-M., Li, S.-H., Liu, X.-Q.: Research on feature value extraction and fault recognition of coil current signal in high-voltage circuit breaker. High Volt. Appar. 51(9), 134–139 (2015)
  12. Li, Z.-Q., Wei, L., Han, D.-P., Teng, W.-T.: Research on mechanical fault diagnosis of high-voltage circuit breaker based on phase space reconstruction. Power Syst. Prot. Control. 46(9), 129–135 (2018)
  13. Zhao, L.-H., Zhang, H., Jing, W., Yang, W., Rong, Q., Fu, R.-R., Feng, Y.: Research on operating mechanism performance of high voltage circuit breaker based on the coil current. J. Sichuan Univ. (Eng. Sci. Ed.). 47(05), 146–152 (2015)
  14. Ren, M., Chen, R.-F., Xia, C.-J., Yu, J.-H., Li, C., Dong, M., Zhang, L.-M., Pan, W.-G.: Mechanical and electrical fault diagno-sis of vacuum circuit breaker based on ternary plot. Proc. CSEE. 42(S1), 332-342 (2022)
  15. Wang, L.-J., Zhang, T., Liu, G.W., Zhang, J.-H., Huang, Y.-F.: Sim-ulation research of motion characteristics of closing electromagnet in operating mechanism for high voltage circuit breaker. High Volt. Appar. 56(07), 50-55 (2020)
  16. Liu, S.-Y., Liu, Z., Zhang, J.-H.: Mechanical DC circuit breaker model for realtime simulations. Int. J. Electr. Power Energy Syst. 107, 110-119 (2019) https://doi.org/10.1016/j.ijepes.2018.11.014
  17. Jefimenko, O.D.: Correct use of Maxwell stress equations for electric and magnetic fields[J]. Am. J. Phys. 51(11), 988-996 (1983) https://doi.org/10.1119/1.13352
  18. Griffiths, D.J. : Introduction to electrodynamics, 3rd edn., pp. 351-356. Prentice Hall (1998)
  19. Yi, L., Peng, Z.-X., Zhang, S., et al.: Research on engineering simu-lation technology of opening and closing coil of high voltage circuit breaker. High Volt. Appar. 56(06), 138-142 (2020)
  20. Peng, Z.-X., Wang, S., Liu, Q., et al.: Experimental platform of high voltage circuit breaker's opening/closing coil current acquisi-tion and fault simulation experiment research. High Volt. Appar. 54(07), 248-253 (2018)
  21. Zhang, S., Peng, Z.-X, Li. R.H., et al.: Research on the difference mechanism of current waveform of circuit breaker opening/closing coil. High Volt. Appar. 56(06), 165-172 (2020)