Abstract
As floor impact sound in apartment building has become a social issue, the government is strengthening the standards and management regarding this matter. To address floor impact sound, it is necessary to understand the vibration characteristics of the floor slab and derive reduction method based on this understanding. This study was conducted to investigate the effect of slab vibration by performing modal test on two sites with similar floor plans, differing only in the presence of bearing wall, and examined the influence of floor impact sound of that through computational analysis. The results of the modal test showed differences in modal frequency and mode shapes depending on the presence of bearing wall, as well as variations characteristics. The computational analysis of floor impact sound indicated that the presence of bearing wall resulted in lower vibration magnitude and sound pressure level. Additionally, an analysis of the influence of the impacting points showed that when the point of application is located at the driving point in the mode shape, the impact sound tends to be greater.
공동주택 바닥충격음은 이웃간 분쟁을 넘어 심각한 사회적 문제로 대두되고 있으며, 다양한 바닥충격음 저감 연구가 진행 중에 있다. 본 연구에서 바닥충격음을 결정하는 바닥 슬래브의 진동 특성을 분석하기 위해 내력벽 유무 및 거실 산정 방식 등에 따른 바닥 슬래브 진동을 모달테스트를 이용하여 분석하였다. 실험 대상은 벽식 구조의 소형 공동주택을 대상으로, 평면이 유사하지만 세대 내 내력벽이 존재하는 타입과 존재하지 않는 타입을 선정하였다. 모달 테스트 측정 결과 내력벽이 존재하지 않는 경우에는 바닥 슬래브의 진동 특성이 전체 세대의 바닥 면적에서 발생하는 것으로 분석되었으며, 이에 따라 내력벽이 존재하지 않는 경우에는 상대적으로 큰 바닥충격음이 발생하는 것으로 분석되었다. 이는 방사면적 및 수음실의 음향 특성의 영향으로 판단되며, 후속 연구에서 보다 면밀한 분석을 수행할 예정이다. 추가적으로 거실 공간의 산정 방식에 따른 바닥충격음 영향을 전산해석을 이용하여 분석하였으며, 분석 결과 동일 세대에서도 거실 공간 산정 방식, 즉 가진 위치 변경에 따른 바닥충격음 차이가 존재하였다. 특히, 중량 충격음을 결정하는 1/1옥타브 밴드의 63Hz에서 약 10dB 편차가 존재하였으며, 개별적인 진동 특성이 강하게 존재하는 주파수 대역에서는 가진 위치이 따른 편차가 상대적으로 크게 발생할 수 있음을 의미한다. 이러한 결론은 향후 공동주택 구조 평면 설계시 활용될 수 있을 것으로 판단되며, 진동 응답의 크기를 저감시키며, 가진 위치에 따른 진동 편차를 저감할 수 있는 설계 방안을 수행할 예정이다.