Acknowledgement
This work was supported by ETRI grant funded by the Korean government[23YB1100].
References
- 소재혁신선도본부 이슈페이퍼, "히트파이프 자립화 핵심기술," 2020.
- 최광성 외, "4차 산업혁명의 숨은 혁신 기술: 전자 패키징 기술," 전자통신동향분석, 제32권 제6호, 2017, pp. 17-26. https://doi.org/10.22648/ETRI.2017.J.320603
- S.H. Moon et al., "Application of aluminum flat heat pipe for dry cooling near the hot spot of a radar array with a multiscale structure," Appl. Therm. Eng., vol. 169, 2020.
- Z. Sun et al., "Large-scale and low-cost production of graphene nanosheets-based epoxy nanocomposites with latent catalyst to enhance thermal conductivity for electronic encapsulation," in Proc. ECTC, (San Diego, CA, USA), June 2021.
- X. Liu et al., "Study and application of nano copper sintering technology in power electronics packaging," in Proc. ECTC, (San Diego, CA, USA), June 2021.
- Y. Kim et al., "Metal thermal interface material for the next generation FCBGA," in Proc. ECTC, (San Diego, CA, USA), June 2021.
- Y.L. Huang et al., "Highly thermal dissipation for large hpc package using liquid metal materials," in Proc. ECTC, (San Diego, CA, USA), June 2021.
- M. Frank et al., "Electrochemical additive manufacturing: A novel approch to thermal management of electronics," in Proc. ECTC, (Orlando, FL, USA), May 2023.
- R.H. Horng et al., "Optimized thermal management from a chip to a heat sink for high-power GaN-based light emitting diodes," IEEE Trans. Electron Devices, vol. 57, no. 9, 2010.
- G. Tang et al., "Development of a novel lead frame based double side liquid cooling high performance SiC power module," in Proc. ECTC, (San Diego, CA, USA), June 2021.
- S.K. Seo et al., "CoW package solution for improving thermal characteristic of TSV-SiP for AI-inference," in Proc. ECTC, (San Diego, CA, USA), June 2021.
- K. Matsumoto et al., "Thermal analysis of DBHi (direct bonded heterogeneous integration) Si Bridge," in Proc. ECTC, (San Diego, CA, USA), June 2021.
- R. Wong et al., "Copper-graphene foams: A new high-performance material system for advanced package-integrated cooling technologies," in Proc. ECTC, (San Diego, CA, USA), June 2021.
- B. Lohani, S.D. Hossain, and R.C. Roberts, "Metal additively microfabricated sipswith embedded microfluidic cooling towards heterogeneous integration with SoCs," in Proc. ECTC, (Orlando, FL, USA), May 2023.
- Z. Zhang et al., "A promising solution using CVD diamond for efficient cooling of power device," Mater. Sci. Eng. B, vol. 177, 2012, pp. 1358-1361. https://doi.org/10.1016/j.mseb.2012.03.005
- S.K. Rajan et al., "Design considerations, demonstration, and benchmarking of silicon microcoldplate and monolithic microfluidic cooling for 2.5D ICs," in Proc. ECTC, (San Diego, CA, USA), June 2021.
- J.N. Hung et al., "Advanced system integration for high performance computing with liquid cooling," in Proc. ECTC, (San Diego, CA, USA), June 2021.
- G. Tang, L.C. Wai, and H. Feng, "Development and demonstration of a novel immersion two phase cooling high power sicpower module," in Proc. ECTC, (Orlando, FL, USA), May 2023.
- J. Chuang et al., "Lidded electronic package with boiling enhancement features," in Proc. ECTC, (San Diego, CA, USA), June 2021.