과제정보
We are grateful to the Jilin Key Laboratory of Solid-State Laser Technology and Application for supporting the equipment in the experiments.
참고문헌
- B. Q. Doan, D. T. Nguyen, M. N. Nguyen, T. H. Le, T. M. H. Dong, and L. H. Duong, "A review on properties and casting technologies of aluminum alloy in the machinery manufacturing," J. Mech. Eng. Res. Dev. 44, 204-217 (2021).
- Z.-T. Wang and X.-H. Zhang, "Aluminum alloy for automobile usage," Light Alloy Fabr. Technol 39, 1-14 (2011).
- J. Han, P. Kim, and H. S. Kim, "Study on surface processing design of aluminum alloy materials that is applied to IT and electronics," J. Korean Cryst. Growth Cryst. Technol. 27, 212-219 (2017). https://doi.org/10.3740/MRSK.2017.27.11.624
- R. E. Litchfield "Laser and other cleaning procedures for aerospace moulds and a study of mould release agents," Ph. D. Thesis, Loughborough University, EK (2004).
- J. Evertsson, F. Bertram, F. Zhang, L. Rullik, L. R. Merte, M. Shipilin, M. Soldemo, S. Ahmadi, N. Vinogradov, F. Carla, J. Weissenrieder, M. Gothelid, J. Pan, A. Mikkelsen, J.-O. Nilsson, and E. Lundgren, "The thickness of native oxides on aluminum alloys and single crystals," Appl. Surf. Sci. 349, 826-832 (2015). https://doi.org/10.1016/j.apsusc.2015.05.043
- J. P. Xiong, Y. G. Zhao, Y. Zhou, and R.-Y. Huang, "Research progress of removal for oxide films on aluminum alloy," Plat. Finish. 35, 15-19 (2013).
- J. M. Lee and K. G. Watkins, "Removal of small particles on silicon wafer by laser-induced airborne plasma shock waves," J. Appl. Phys. 89, 6496-6500 (2001). https://doi.org/10.1063/1.1353562
- Y. Z. Chen and and Y. H. Hu, "Research and application of ship hull fouling cleaning technologies," Surf. Technol. 46, 60-71 (2017).
- M. Bertasa and C. Korenberg, "Successes and challenges in laser cleaning metal artefacts: A review," J. Cult. Herit. 53, 100-117 (2022). https://doi.org/10.1016/j.culher.2021.10.010
- Z. Li, D. Zhang, X. Su, S. Yang, J. Xu, R. Ma, D. Shan, and B. Guo, "Removal mechanism of surface cleaning on TA15 titanium alloy using nanosecond pulsed laser," Opt. Laser Technol. 139, 106998 (2021).
- A. Kumar, V. R. Sonar, D. K. Das, R. B. Bhatt, P. G. Behere, M. Afzal, A. Kumar, J. P. Nilaya, and D. J. Biswas, "Laser cleaning of tungsten ribbon," Appl. Surf. Sci. 308, 216-220 (2014). https://doi.org/10.1016/j.apsusc.2014.04.138
- Y. M. Chen, L. Z. Zhou, F. Yan, J. Wang, S. Li, and C. Wang, "Mechanism and quality evaluation of laser cleaning of aluminum alloy," Chin. J. Lasers 44, 1202005 (2017).
- Y.-Q. Tong, Y.-K. Zhang, H.-B. Yao, C.-M. Meng, and H.-B. Guan, "Plasma spectral analysis of laser cleaning process in air," Spectrosc. Spectr. Anal. 31, 2542-2545 (2011).
- W. Wang, J. Shen, W. Liu, H. Bian, and Q. Li, "Effect of laser energy density on surface physical characteristics and corrosion resistance of 7075 aluminum alloy in laser cleaning," Opt. Laser Technol. 148, 107742 (2022).
- G. Zhu, S. Wang, W. Cheng, G. Wang, W. Liu, and Y. Ren, "Investigation on the surface properties of 5A12 aluminum alloy after Nd: YAG laser cleaning," Coatings 9, 578 (2019).
- M. S. Brown and C. B. Arnold, Fundamentals of Laser-Material Interaction and Application to Multiscale Surface Modification (Springer Berlin, Germany, 2010).