과제정보
이 논문은 행정안전부 자연재난 정책연계형 기술개발사업의 지원을 받아 수행된 연구임(2023-MOIS35-005)
참고문헌
- JUNJIN CO., LTD, "Product Selection", 2021, "https://www.junjin.com/kr/product/product_list.php"
- Zendehboudi, Sohrab, et al. "Dimensional analysis and scale-up of immiscible two-phase flow displacement in fractured porous media under controlled gravity drainage." Energy & Fuels 25.4 (2011): 1731-1750. https://doi.org/10.1021/ef101506n
- Ali, A., et al. "Investigation of energy performance, internal flow and noise characteristics of miniature drainage pump under water-air multiphase flow: Design and part load conditions." International Journal of Environmental Science and Technology 19.8 (2022): 7661-7678. https://doi.org/10.1007/s13762-021-03619-1
- Si, Qiaorui, et al. "Experimental and numerical study on gas-liquid two-phase flow behavior and flow induced noise characteristics of radial blade pumps." Processes 7.12 (2019): 920.
- Gu, Pengtai, et al. "Transient flow field and performance analysis of a claw pump for FCVs." International Journal of Hydrogen Energy 46.1 (2021): 984-997. https://doi.org/10.1016/j.ijhydene.2020.09.154
- Lee, I. Y., and S. R. Choi. "Discharge Flow Characteristics of A Rotating-Cam and Fixed-Cylinder Type Radial Piston Pump." Transactions of The Korea Fluid Power Systems Society 8.1 (2011): 10-18.
- Kim, S. H., H. M. Son, and J. C. Lee. "Characteristics of two dimensional flow in an involute gear pump." Transactions of The Korea Fluid Power Systems Society 8.2 (2011): 36-41.
- Ko, Seong-Hoon, Kwang-Hee Lee, and Chul-Hee Lee. "Safety Verification of Gantry Cranes using Hydraulic Cylinders." Journal of Drive and Control 16.2 (2019): 8-14. https://doi.org/10.7839/KSFC.2019.16.2.008
- Ju, Feng, and Yoo Sang Choo. "Dynamic analysis of tower cranes." Journal of engineering mechanics 131.1 (2005): 88-96. https://doi.org/10.1061/(ASCE)0733-9399(2005)131:1(88)
- Jiang, Weiguang, Lieyun Ding, and Cheng Zhou. "Digital twin: Stability analysis for tower crane hoisting safety with a scale model." Automation in Construction 138 (2022): 104257.
- Karpe, Ajinkya, et al. "Validation of the use of FEM (Ansys) for Structural Analysis of Tower Crane Jib and Static and Dynamic Analysis of Tower Crane Jib Using Ansys." International Journal of Innovative Research in Advanced Engineering 1.4 (2014): 69-75.
- Choi, Yo Han, Il Hoon Yoo, and Chul-Hee Lee. "Thermal Flow Analysis of an Engine Room using a Porous Media Model for Imitating Flow Rate Reduction at Outlet of Industrial Machines." Journal of Drive and Control 19.1 (2022): 62-68.
- Won, Jonggeun, et al. "Simulation Analysis on Static Safety of 55Hp-Servo-Based Hydrostatic Transmission." Journal of Drive and Control 19.1 (2022): 34-42. https://doi.org/10.7839/KSFC.2022.19.1.034
- Choi, Seong Woong, et al. "A Study on Simscape based 6DOF Field Robot Simulation Model." Journal of Drive and Control 19.2 (2022): 1-10. https://doi.org/10.7839/KSFC.2022.19.2.001
- Kim, S. H., S. J. Yoo, and K. I. Lee. "Geometric Modeling and Trajectory Control Design for an Excavator Mechanism." Transactions of The Korea Fluid Power Systems Society 4.2 (2007): 1-6.
- Park, Seung Woon, Yo Han Choi, and Chul-Hee Lee. "Review of Regulation for Rollover Test and Evaluation of Safety for Buses by using Simulation of Multi-body Dynamics." Journal of Drive and Control 19.3 (2022): 39-46.
- Lalik, Krzysztof, et al. "Integrated stress measurement system in tower crane mast." Measurement 102 (2017): 47-56. https://doi.org/10.1016/j.measurement.2017.01.041
- Rozvany, George IN. "A critical review of established methods of structural topology optimization." Structural and multidisciplinary optimization 37 (2009): 217-237. https://doi.org/10.1007/s00158-007-0217-0