DOI QR코드

DOI QR Code

Studies on seismic performance of the new section steel beam-wall connection joint

  • Weicheng Su (School of Civil Engineering, Guangzhou University) ;
  • Jian Liu (School of Civil Engineering, Guangzhou University) ;
  • Changjiang Liu (School of Civil Engineering, Guangzhou University) ;
  • Chiyu Luo (Guangdong Architectural Design & Research Institute Co. LTD) ;
  • Weihua Ye (School of Civil Engineering, Guangzhou University) ;
  • Yaojun Deng (School of Civil Engineering, Guangzhou University)
  • 투고 : 2023.05.12
  • 심사 : 2023.11.21
  • 발행 : 2023.12.10

초록

This paper introduces a new hybrid structural connection joint that combines shear walls with section steel beams, fundamentally resolving the construction complexity issue of requiring pre-embedded connectors in the connection between shear walls and steel beams. Initially, a quasi-static loading scheme with load-deformation dual control was employed to conduct low-cycle repeated loading experiments on five new connection joints. Data was acquired using displacement and strain gauges to compare the energy dissipation coefficients of each specimen. The destruction process of the new connection joints was meticulously observed and recorded, delineating it into three stages. Hysteresis curves and skeleton curves of the joint specimens were plotted based on experimental results, summarizing the energy dissipation performance of the joints. It's noteworthy that the addition of shear walls led to an approximate 17% increase in the energy dissipation coefficient. The energy dissipation coefficients of dog-bone-shaped connection joints with shear walls and cover plates reached 2.043 and 2.059, respectively, exhibiting the most comprehensive hysteresis curves. Additionally, the impact of laminated steel plates covering composite concrete floors on the stiffness of semi-rigid joint ends under excessive stretching should not be disregarded. A comparison with finite element analysis results yielded an error of merely 2.2%, offering substantial evidence for the wide-ranging application prospects of this innovative joint in seismic performance.

키워드

과제정보

This research work was supported by Natural Science Foundation of China (51878586), Chongqing Technology Innovation and Application Development Special General Project (cstc2020jscx-msxmX0084), Chongqing Construction Science and Technology Plan Key Project (Urban Science 2021, No. 1-8), Guangzhou Science and Technology Project (202201010750).

참고문헌

  1. An, Q., Wang, Y., Yu, H.R. and Wang, X.J. (2022), "Seismic behaviour of anchored prefabricated wall-beam joints of bundled lipped channel-concrete composite wall structures", Thin Wall. Struct., 179, 109695. http://doi.org/10.1016/j.tws.2022.109695.
  2. Bian, J.L., Cao, W.L., Dong, H.Y. and Chen, J.W. (2022), "Seismic research of prefabricated CFST frame with various H-steel frame shear walls", J. Build. Eng., 57, 104971. http://doi.org/10.1016/j.jobe.2022.104971.
  3. Cao, Q., Ju, H. Jia, J.Q., Zhang, Q. and Zhang, L.H. (2023), "Seismic performance of reinforced concrete beam-column joint made of post-filling coarse aggregate concrete", Struct. Concrete, 24(1), 1118-1133. http://doi.org/10.1002/suco.202200419.
  4. Chen, H.Y. Zhu, H.G., Liu, Y., Chen, Z.Y. and Yang, Y.W. (2022), "Experimental study on the effect of column lateral friction torque on seismic performance of IMS structure middle joints", J. Build. Eng., 48, 103983. http://doi.org/10.1016/j.jobe.2021.103983.
  5. Ding, K.W. and Zhang, Y. (2021), "Experimental study on seismic performance of fabricated bolted joint under low-cycle reciprocating loads", Result. Eng., 9, 100208. http://doi.org/10.1016/j.rineng.2021.100208.
  6. Fu, Y.Q., Fan, G.L., Tao, L., Yang, Y.J. and Wang, J.C. (2022), "Seismic behavior of prefabricated steel reinforced concrete shear walls with new type connection mode", Struct., 37, 483-503. http://doi.org/10.1016/j.istruc.2021.10.055.
  7. Ghafar, W.A., Tao, Z., Tao, Y., He, Y.C., Wu, L. and Zhang, Z.Q. (2022), "Experimental and numerical study of an innovative infill web-strips steel plate shear wall with rigid beam-to-column connections", Build., 12(10), 1560. http://doi.org/10.3390/buildings12101560.
  8. Ghasem, P., Majid, G., Alireza, Y. and Morteza S. (2017), "Modeling and analysis of thin steel plate shear walls using the new method", 2nd International Conference on Civil Engineering, Architecture & Urban Planning Elites.
  9. Ghayeb, H.H., Razak, H.A. and Sulong, N.H.R. (2017), "Development and testing of hybrid precast concrete beam-to-column connections under cyclic loading", Constr. Build. Mater., 151, 258-278. http://doi.org/10.1016/j.conbuildmat.2017.06.073.
  10. Gholhaki, M., Karimi, M. and Pachideh, G. (2017), "Investigation of subpanel size effect on behavior factor of stiffened steel plate shear wall", J. Struct. Constr. Eng., 5(4), 73-87.
  11. Gholhaki, M., Pachideh, G. and Rezaeafar, O. (2017), "An experimental study on mechanical properties of concrete containing steel and polypropylene fibers at high temperatures", J. Struct. Constr. Eng., 4(3), 167-179.
  12. Han, Q.H., Wang, D.Y., Zhang, Y.S. Tao, W.J. and Zhu, Y. (2020), "Experimental investigation and simplified stiffness degradation model of concrete shear wall with steel connectors", Eng. Struct., 220, 110943. http://doi.org/10.1016/j.engstruct.2020.110943.
  13. Huang, W. and Hu, G.X. (2021), "Seismic performance analysis of a novel demountable precast concrete beam-column connection with multi-slit devices", J. Build. Eng., 44, 102663. http://doi.org/10.1016/j.jobe.2021.102663.
  14. Huang, W., Hu, G.X. and Zhang, J.R. (2021), "Experimental study on the seismic performance of new precast concrete beam-column joints with replaceable connection", Struct., 35, 856-872. http://doi.org/10.1016/j.istruc.2021.11.050.
  15. Jeddi, M.Z., Sulong, N.H.R. and Ghanbari-Ghazijahani, T. (2022), "Behaviour of double-sleeve TubeBolt moment connections in CFT columns under cyclic loading", J. Constr. Steel Res., 194, 107302. http://doi.org/10.1016/j.jcsr.2022.107302.
  16. Jiang, Z.Q., Dou, C., Zhang, A.L., Wang, Q. and Wu, Y.X. (2019), "Experimental study on earthquake-resilient prefabricated cross joints with L-shaped plates", Eng. Struct., 184, 74-84. http://doi.org/10.1016/j.engstruct.2019.01.067.
  17. Khosravikhor, A., Gholhaki, M,. Rezaifar, O. and Pachideh, G. (2023), "Effect of Ni-Ti shape memory alloy on ductility and response modification factor of SPSW systems", Steel Compos. Struct., 48(3), 353-365. https://doi.org/10.12989/scs.2023.48.3.353.
  18. Li, L.H., Ma, S.C., Bao, P. and Wang, H. (2022), "Effect of hidden column type on seismic performance of the insulated sandwich wall panel joints with ceramsite concrete layer", Build., 12(12), 2214. http://doi.org/10.3390/buildings12122214.
  19. Li, S.F., Li, Q.N., Zhang, H., Jiang, H.T., Yan, L. and Jiang, W.S. (2018), "Experimental study of a fabricated confined concrete beam-to-column connection with end-plates", Constr. Build. Mater., 158, 208-216. http://doi.org/10.1016/j.conbuildmat.2017.10.025.
  20. Li, S.F., Zhan, D., Li, Q.N., Zhao, H.J., Zhang, J.L. and Yuan, D.W. (2020), "Research on prefabricated concrete beam-column joint with high strength bolt-end plate", Struct. Eng. Mech., 74(3), 395-406. http://doi.org/10.12989/sem.2020.74.3.395.
  21. Li, Y.Q. and Huang, B.H. (2022), "Research on load-bearing performance of new fabricated steel structure beam-column joints with energydissipating elements", Struct., 38, 492-501. http://doi.org/10.1016/j.istruc.2022.02.001.
  22. Liu, T.J., Lu, J.D. and Liu, H.Y. (2020), "Experimental and numerical studies on the mechanical performance of a wallbeam- strut joint with mechanical couplers for prefabricated underground construction", Int. J. Concrete Struct. Mater., 14, 1-23. http://doi.org/10.1186/s40069-020-00412-1.
  23. Munesi, A., Gholhaki, M., Sharbatdar, M.K. and Pachideh, V. (2023), "Study on the gap width between the steel plate and concrete panels on behavior of the buckling-restrained steel plate shear walls", Struct. Concrete, 24(5), 5872-5886. http://doi.org/10.1002/suco.202200879.
  24. Pachideh, G., Gholhaki, M. and Kafi, M. (2020), "Experimental and numerical evaluation of an innovative diamond-scheme bracing system equipped with a yielding damper", Steel Compos. Struct., 36(2), 197-211. https://doi.org/10.12989/scs.2020.36.2.197.
  25. Pachideh, G., Kafi, M. and Gholhaki, M. (2020), "Evaluation of cyclic performance of a novel bracing system equipped with a circular energy dissipater", Struct., 28, 467-481. http://doi.org/10.1016/j.istruc.2020.09.007.
  26. Tao, C., He, H.X. and Chang, S.T. (2022), "Seismic performance research on precast wall-beam out-of-plane joint with ECC post-cast zone", Eng. Struct., 266, 114488. http://doi.org/10.1016/j.engstruct.2022.114488.
  27. Wang, T., Yuan, S.F., Jiang, R.A., Liu, L.W., Liu, J., Dou, L.J. and Zou, G.Y. (2022), "Behavior of prefabricated composite arch coupling beam for shear walls subjected to cyclic loading", Build., 12(7), 917. http://doi.org/10.3390/buildings12070917.
  28. Xu, C.Y., Nehdi, M.L., Youssef, M.A., Wang, T. and Zhang, L.V. (2021), "Seismic performance of RC beam-column edge joints reinforced with austenite stainless steel", Eng. Struct., 232, 111824. http://doi.org/10.1016/j.engstruct.2020.111824.
  29. Ye, Y.X., Hou, Z.Y., Qiao, P.S., Wang, Z.B. and Kang, Q. (2022), "Experimental study on seismic behavior of a new fully precast rocking beam-column joint", J. Build. Eng., 62, 105337. http://doi.org/10.1016/j.jobe.2022.105337.
  30. Ye, Y.X., Wang, Z.B., Yang, Z.H., Hou, Z.Y. and Qiao, P.S. (2023), "Seismic performance test research on a new type of replaceable energy-consuming joint column", Soil Dyn. Earthq. Eng., 166, 107786. http://doi.org/107786.10.1016/j.jcsr.2020.106269.
  31. Yin, L.F., Niu, Y., Quan, G., Gao, H. and Ye, J. (2022), "Development of new types of bolted joints for cold-formed steel moment frame buildings", J. Build. Eng., 50, 104171. http://doi.org/10.1016/j.jobe.2022.104171.
  32. Yu, J.B., Zhang, E.S., Xu, Z.Q. and Guo, Z.X. (2022), "Seismic performance of precast concrete frame beam-column connections with high-strength bars", Mater., 15(20), 7127. http://doi.org/10.3390/ma15207127.
  33. Yuan, C.M, Cai, J., Chen, Q.J., Liu, X.P., Huang, H.J., Zuo, Z.L. and He, A. (2022), "Experimental study on seismic behaviour of precast recycled fine aggregate concrete beam-column joints with pressed sleeve connections", J. Build. Eng., 58, 104988. http://doi.org/10.1016/j.jobe.2022.104988.
  34. Zhang, A.L., Li, S.H., Jiang, Z.Q., Fang, H. and Dou, C. (2017), "Design theory of earthquake-resilient prefabricated sinusoidal corrugated web beam-column joint", Eng. Struct., 150, 665-673. http://doi.org/10.1016/j.engstruct.2017.07.088.
  35. Zhang, A.L., Qiu, P., Jiang, Z.Q., Wu, L. and Liu, S.C. (2020), "Experimental study of earthquake-resilient end-plate type prefabricated steel frame joint", J. Constr. Steel Res., 166, 105927. http://doi.org/10.1016/j.jcsr.2020.105927.
  36. Zhou, J., Fang, X.D., Jiang, Y. and Yang, J. (2019), "Cyclic experiments on concrete-encased CFST wall-RC coupling beam joints with non-through-core anchorages", J. Earthq. Eng., 26(3), 1518-1542. http://doi.org/10.1080/13632469.2020.1733141.
  37. Zhou, T., Yang, Z.X., Chen, Z.H., Tuo, Y., Zhang, P.F. and Chen, H.Z. (2021), "Mechanical properties of π-shaped joints of flat concrete-filled steel tubular column", J. Constr. Steel Res., 187, 106916. http://doi.org/10.1016/j.jcsr.2021.106916.