DOI QR코드

DOI QR Code

연결보의 이력단계별 에너지 소산계수의 변화에 관한 연구

Analyzing Energy Dissipation Coefficient Changes in Each Hysteresis Step of Coupling Beams

  • 유석형 (경상국립대학교 건축공학부)
  • Yoo, Seok-Hyung (School of Architectural Engineering, Gyeongsang National University)
  • 투고 : 2023.08.12
  • 심사 : 2023.10.17
  • 발행 : 2023.11.30

초록

Reinforced concrete members undergo energy dissipation as they experience pinching and a reduction in both stiffness and strength during hysteretic behavior. Thus, it is crucial to adequately account for the hysteretic behavior characteristics of materials and members in nonlinear time history analysis. The energy dissipation coefficient, which measures how energy is lost during cyclic behavior, is expected to decrease as the behavior progresses. However, current guidelines referred to as AIK-B-2021-001 suggest a single energy dissipation factor for each member. In this study, changes were observed in the energy dissipation coefficient of coupling beams based on existing experimental results and nonlinear time history analysis using the Shear Hinge Displacement Type element of Perform 3D. A model was established for the hysteretic behavior to determine the idealized elastoplastic energy. In conclusion, it was found that the energy dissipation coefficient decreased as the hysteretic behavior advanced, and this change was quantified.

키워드

참고문헌

  1. Architectural Institute of Korea & Korea Concrete Institute (2021). Non-linear analysis model for performance-based seismic design of reinforced concrete building structures, Korea
  2. Clough, R. W., & Johnson, S. B. (1966). Effect of Stiffness Degradation on Earthquake Ductility Requirements. Proceedings, Japan Earthquake Engineering Symposium, 195-198.
  3. Computers & Structures INC. (2011). Components and Elements for PERFORM-3D and PEFORM-COLLAPSE, Ver 5, CSI.
  4. Hwang, K. L. (2016). Seismic performance of high-rise reinforced concrete wall building structures, Ph. D. Thesis, Korea University, Korea
  5. Moehle, J., Yousef, B., Nirmal, J., & Pierson, J. (2011). "Case Studies of the Seismic Performance of Tall Buildings Designed by Alternative Means_Task 12 Report for the Tall Buildings Initiative", Pacific Earthquake Engineering Research Center, University of California, Berkeley, CSSC Report 11-02.
  6. Korea Infrastructure Safety Corporation (2019). Guidelines for evaluating the seismic performance of existing facilities, Korea
  7. Land and Housing Institute (2015). Developement of Non-linear Hysteretic Model for the Performance Based Design(1), LHI Report 2015-63, Korea
  8. Ministry of Land, Infrastructure and Transport (2021). Concrete seismic design standard KDS 14 20 80, Korea
  9. Naish, D., John, W. W., Andrew, J. F., & Ron, K. (2009). "Experimental Evaluation and Analytical Modeling of ACI 318-05/08 Reinforced Concrete Coupling Beams Subjected to Reversed Cyclic Loading", Report to Charles Pankow Foundation School of Engineering and Applied Science University of California, Los Angeles, America.
  10. Takeda, T., Sozen, M. A., & Nielsen, N. N. (1970). Reinforced Concrete Response to Simulated Earthquakes, Jonrnal of the Structural Divison, ASCE, 96(ST12), 2557-2572. https://doi.org/10.1061/JSDEAG.0002765