대한방사성의약품학회지 (Journal of Radiopharmaceuticals and Molecular Probes)

  • 제9권2호
  • /
  • Pages.63-68
  • /
  • 2023
  • /
  • 2384-1583(pISSN)
  • /
  • 2508-3848(eISSN)
대한방사성의약품학회 (Korean Society of Radiopharmaceuticals and Molecular Probes)
권호 표지
DOI QR코드

DOI QR Code

Design Study of a Liquid Target For High-yield Radioisotopes Production

  • 투고 : 2023.10.04
  • 심사 : 2024.12.26
  • 발행 : 2023.12.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

In this study a liquid target design for producing radioisotopes at high-yield is proposed. The target was designed to operate under high power proton beam. During high power beam irradiation in liquid target the beam not only occurring a nuclear reaction but also combined with physical phenomena like phase change and internal flow causing by natural convection. The phase change could reduce production yield because the local density at the boiling bubble is lower. The possibility of nuclear reaction is higher in the liquid state than vapor state and the vapor should increase the pressure inside the target. Therefore the higher beam power causes higher internal pressure inside the target which could damage the target. The target was mechanically designed to overcome the high pressure with less boiling inside during high power beam irradiation. Also, additional design technique was introduced for easy to use and self-shielding body design for radiation protection. MC-50 cyclotron was used for the experiment. 3 cc of H218O water was filled in target and 20 MeV, 30 µA of proton beam was irradiated in target for one hour. The average production yield of F-18 was 2.6 Ci.

키워드

과제정보

이 성과는 정부(과학기술정보통신부)의 재원으로 한국연구재단의 지원을 받아 수행된 연구임(No. 1711092394).

참고문헌

  1. Kilbourn MR, T Hood J, Welch MJ. A simple 18O water target for 18F production. Int J Appl Radiat Isot 1984;35(No. 7):599-602.
  2. Heselius SJ, Schlyer DJ, Wolf AP. A diagnostic study of proton-beam irradiated water targets. Appl Radiat Isot 1989;40:663-9.
  3. Bergstrom JO, Eriksson T. Optimization of A Commercial PET cyclotron for increased 18F-production. AIP Conference Proceedings 2003;680:1112-5.
  4. Steyn GF, Nortier FM, Mills SJ. Helium cooling of a double-foil window for external cyclotron beams. Nucl Instrum Methods Phys Res 1990;A292:35-44.
  5. Stokely MH, Deployment, Testing and Analysis of Advanced Thermosyphon Target Systems for Production of Aqueous [18F]Fluoride via 18O(p,n)18F. Ph.D. Dissertation. North Carolina State University 2008.
  6. Hong BH, Jung IS. Pressure control of a proton beam-irradiated water target through an internal flow channel-induced thermosyphon. Applied Radiation and Isotopes 2017;125:180-4.
  7. Heselius SJ, Schlyer DJ, Wolf AP. A diagnostic study of proton-beam irradiation water target. International Journal of Radiation Applications and Instrumentation, Part A, Applied Radiation and Isotopes 1989;40(8):663-9.
  8. Hur MG, Jung IS, Chang HS, Yang SD, Cahi JS, Oh HS. The study of proton beam irradiated H218O water target. Nuclear Instrument and Methods in Physics Research 2005;B 241:735-7.
  9. Hong BH, Yang TG, Jung IS, Park YS, Cho HH. Visualization experiment of 30 MeV proton beam irradiated water target. Nucl Instrum Methods Phys Res Sect A: Accel Spectrom Detect Assoc Equip 2011;655(1):103-7.
  10. Peeples JL, Stokely MH, Michael JD. Thermal performance of batch boiling water targets for 18F production. Appl Radiat Isot 2011;69:1349-54.
  11. Hong BH, Kang J, Jung IS, Han GR, Park YS, Cho HH. Self-overcoming of the boiling condition by pressure increment in a water target irradiated by proton beam. Nucl Instrum Methods Phys Res Sect A: Accel Spectrom Detect Assoc Equip 2013;728:6-10.
  12. Hong BH, Hwang WT, Park C. Experimental study of an initially pressurized water target irradiated by a proton beam. Applied Radiation and Isotopes 2020;165:109322.
  13. Alvord CW, Ruggles AE, West CD. Calculation of attainable superheats and predicted embryonic flux rates in commercial water isotope targets. Applied Radiation and Isotopes 2008;66:1781-87.
  14. Cyclotron Produced Radionuclides: Physical Characteristics and Production Methods. IAEA Technical Report Series 2009;No 468:109-10.