Structural Engineering and Mechanics

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Experimental and numerical study of effect of the fibers orientation of the different types of composite plates notched of U-shape repaired by composite patch

  • Received : 2022.04.12
  • Accepted : 2023.08.21
  • Published : 2023.11.10
⟨ Previous Next ⟩

Abstract

In this work, the effect of the correction fibers direction on the efficiency of repairing damaged composite plates was highlighted. The composite plates studied in this work consist of eight layers of graphite/epoxy, while the patch used in this repair consists of four layers of the same type. The results obtained in this work, whether with regard to the experimental or analytical side, showed that the fibers orientation affects the repair efficiency, so the closer the angle of fibers inclination is to the tensile strength direction, the performance of the composite material is ideal. Hence, we conclude that the composite materials with longitudinal fibers (Parallel to tensile strength) is the most powerful and efficient material in performance.

Keywords

References

  1. Abaqus, Abaqus Standard/User's Manual, Version 6.5 (2007), Hibbit Karlsson & Sorensen Inc., Pawtucket, RI, USA.
  2. Achache, H., Boutabout, B., Benzerdjeb, A. and Ouinas, D. (2015), "Evaluation of energy release rate of composites laminated with finite element method", Struct. Eng. Mech., 55(1), 191-204. https://doi.org/10.12989/sem.2015.55.1.191.
  3. Achache, H. and Benzerdjeb, A. (2017), "Delamination of a composite laminated under monotonic loading", Struct. Eng. Mech., 63(5), 597-605. https://doi.org/10.12989/sem.2017.63.5.597.
  4. Amari, K. and Berrahou, M. (2021), "Experimental and numerical study of the effect of patch shape for notched cracked composite structure repaired by composite patching", J. Fail. Anal. Prevent., 22(3), 1040-1049. https://doi.org/10.1007/s.11668.022.01391.z.
  5. Azzeddine, N., Benkheira, A., Fekih, S.M. and Belhouari, M. (2020), "Numerical study of bonded composite patch repair in damaged laminate composites", Adv. Aircraft Spacecraft Sci., 7(2), 151-168. https://doi.org/10.12989/aas.2020.7.2.151.
  6. Ban, C.S., Lee, Y.H., Choi, J.H. and Kweon, J.H. (2008), "Strength prediction of adhesive joints using the modified damage zone theory", J. Compos. Struct., 86(1), 96-100. https://doi.org/10.1016/j.compstruct.2008.03.016.
  7. Berrahou, M. and Bouiadjra, B.B. (2016), "Analysis of the adhesive damage for different patch shapes in bonded composite repair of corroded aluminum plate", Struct. Eng. Mech., 59(1), 123-132. https://doi.org/10.12989/sem.2016.59.1.123.
  8. Berrahou, M., Salem, M., Mechab, B. and Bouiadjra, B.B. (2017), "Effect of the corrosion of plate with double cracks in bonded composite repair", Struct. Eng. Mech., 64(3), 323-328. https://doi.org/10.12989/sem.2017.64.3.323.
  9. Chavali, P.J. and Taru, G.B. (2021), "Effect of fiber orientation on mechanical and tribological properties of banana-reinforced composites", Fail. Anal. Prevent., 21, 1-8. https://doi.org/10.1007/s11668-020-01048-9.
  10. Duong, C.N. and Wang, C.H. (2007), Composite Repair: Theory and Design, Elsevier, The Netherlands.
  11. Gergely, C., Soraia, P., Michael, R. and Paul, R. (2015), "Demonstration of pseudo ductility in unidirectional discontinuous carbon fibre/epoxy prepreg composites", Compos. Sci. Technol., 106, 110-119. https://doi.org/10.1016/j.compscitech.2014.10.022.
  12. Gong, X.J., Cheng, P., Aivazzadeh, S. and Xiao, X. (2014), "design and optimization of bonded patch repairs of laminated composite structures", Compos. Struct., 123, 292-300. https://doi.org/10.1016/j.compstruct.2014.12.048.
  13. Hemanth, K.C. and Swamy, R.P. (2021), "Experimental investigation on the fatigue behavior of glass fiber-reinforced epoxy composites under rotating bending loads", Fail. Anal. Prevent., 21, 582-587. https://doi.org/10.1007/s11668-020-01105-3.
  14. Khouloud, C., Mustapha, A., Daniel, S. and Ayad, R. (2016), "Effect of water ageing on the mechanical and damping properties of flax-fibre reinforced composite materials", Compos. Struct., 152, 259-266. https://doi.org/10.1016/j.compstruct.2016.05.045.
  15. Lasikun, L., Ariawan, D., Surojo, E. and Triyono, J. (2018), "Effect of fiber orientation on tensile and impact properties of zalacca midrib fiber-hdpe composites by compression molding", AIP Conf. Proc., 1931(1), 030060. https://doi.org/10.1063/1.5024119.
  16. Legrand, V., Tranvan, L., Rizk, G., Khalil, K., Casari, P. and Pacquemin, F. (2015), "Durability and post-combustion mechanical properties of sandwich composite materials", Comptes Rendues des JNC19 Reports, Academia, Lyon.
  17. Mani, C.K., Pradeep, K.M., Hari, B.N., Chetan, K.H., Pankaj, V.K., Subhransu, P. and Subrata, K.P. (2019), "Theoretical and experimental modal responses of adhesive bonded t-joints", Wind Struct., 29(5), 361-369. https://doi.org/10.12989/was.2019.29.5.361.
  18. Mechab, B., Salem, M., Malika, M. and Boualem, S. (2020), "Probabilistic elastic-plastic fracture mechanics analysis of propagation of cracks in pipes under internal pressure", Frattura ed Integrita Strutturale, 14(54), 202-210. https://doi.org/10.3221/IGF-ESIS.54.15.
  19. Mokhtari, M.M., Madani, K., Belhouari, M. and Sebastien, T. (2013), "Effects of composite adherend properties on stresses in double lap bonded joints", Mater. Des., 44, 633-639. https://doi.org/10.1016/j.matdes.2012.08.001.
  20. Mouritz, A.P. and Gardiner C.P. (2002), "Compression properties of fire-damaged polymer sandwich composites", Compos. Part A, Appl. Sci. Manuf., 33(5), 609-620. https://doi.org/10.1016/S1359-835X(02)00022-2.
  21. Mouritz, A.P. and Mathys, Z. (1999), "Post-fire mechanical properties of marine polymer composites", Compo. Struct., 47(1-4), 643-653. https://doi.org/10.1016/S0263-8223(00)00043-X.
  22. Paul, J.C. and Ganga, B.T. (2021), "Effect of fiber orientation on mechanical and tribological properties of banana-reinforced composites", Fail. Anal. Prevent., 21, 1-8. https://doi.org/10.1007/s11668-020-01048-9.
  23. Pham, L., Tran, P. and Sanjayan, J. (2020), "Steel fibres reinforced 3d printed concrete: Influence of fibre sizes on mechanical performance", Constr. Build. Mater., 250, 118785. https://doi.org/10.1016/j.conbuildmat.2020.118785.
  24. Pruthwiraj, S., Sambit, K.P. and Sisir, M. (2019), "Effect of agglomerated zirconia-toughened mullite on the mechanical properties of giant cane fiber mat epoxy laminated composites", Struct. Eng. Mech., 70(2), 233-243. https://doi.org/10.12989/sem.2019.70.2.233.
  25. Salem, M., Berrahou, M., Mechab, B. and Bouiadjra, B.B. (2018), "Effect of the angles of the cracks of corroded plate in bonded composite repair", Frattura ed Integrita Strutturale, 46, 113-123. https://doi.org/10.3221/IGF-ESIS.46.12.
  26. Salem, M., Berrahou, M., Mechab, B. and Bouiadjra, B.B. (2021), "Analysis of the adhesive damage for different patch shapes in bonded composite repair of corroded aluminum plate under thermo-mechanical loading", Fail. Anal. Prevent., 21, 1274-1282. https://doi.org/10.1007/s11668-021-01167-x.
  27. Sathish, P., Kesavan, R., Ramnath, B.V. and Vishal, C. (2017), "Effect of fiber orientation and stacking sequence on mechanical and thermal characteristics of banana-kenaf hybrid epoxy composite", Silicon, 9(4), 577-585. https://doi.org/10.1007/s12633-015-9314-7.
  28. Shi, Y., Mantaux, O., Gillet, A. and Lacoste, E. (2019), Tensile Strength of Aligned Discontinuous Composites, 21st National Days on Composites.
  29. Soraia, P. and Paul, R. (2014), "An analytical shear-lag model for composites with 'brick-andmortar' architecture considering non-linear matrix response and failure", Compos. Sci. Technol., 104, 11-124. https://doi.org/10.1016/j.compscitech.2014.09.001.
  30. Vu, N.H., Pham, X.T., Francois, V. and Cuilliere, J.C. (2019), "Caracterisation du comportement d'une plaque composite de grande dimension", Substance ETS.
  31. Wang, H.W., Zhou, H.W., Gui, L.L., Ji, H.W. and Zhang, X.C. (2013), "Analysis of effect of fiber orientation on young's modulus for unidirectional fiber reinforced composites", Compos. B Eng., 56, 733-739. https://doi.org/10.1016/j.compositesb.2013.09.020.
  32. Wang, X., Khameneian, A., Dice, P., Chen, B., Shahbakhti, M., Naber, J.D., Archer, C., Qu, Q., Glugla, C. and Huberts, G. (2019), "Control oriented model-based burn duration and ignition timing prediction with recursive-least-square adaptation for closed-loop combustion phasing control of a spark ignition engine", Dyn. Syst. Control Conf., 59155, v002t12a004. https://doi.org/10.1115/DSCC2019-9073.
  33. Yoo, D.Y. and Nemkumar, B. (2015), "Numerical simulation on structural behavior of UHPFRC beams with steel and GFRP bars", Comput. Concrete, 16(5), 759-774. https://doi.org/10.12989/cac.2015.16.5.759.