Acknowledgement
This work was supported by the National Research Council of Science & Technology (NST) grant (CAP-20-03-KAERI) and NRF grants (2021M2D1A 1084836, 2021R1l1A2057941 and 2021K1A3A1A78097845) funded by the Korean government (MSIT).
References
- ASME, BPVC Section III, Rules for Construction of Nuclear Facility Components, Division 5, High Temperature Reactors, ASME, New York, 2021.
- ASME B31.1, ASME Code for Power Piping, ASME, New York, 2018.
- H.-Y. Lee, S.-K. Son, M.-G. Won, J.-Y. Jeong, Risks of non-conservative design according to ASME B31.1 for high-temperature piping subjected to long-term operation in creep range, Nucl. Sci. Tech. 30 (5) (2019) 1-11. https://doi.org/10.1007/s41365-018-0540-8
- H.-Y. Lee, J. Eoh, Securing integrity of high-temperature pressure boundary design rules, Int. J. Pres. Ves. Pip. 195 (2022), 104598_1-10459813. https://doi.org/10.1016/j.ijpvp.2021.104598
- H.-Y. Lee, J. Lee, Issues and solutions for integrity of pressure vessels and piping subjected to long-term creep exposure in supercritical thermal plants, Mater. A. T. High. Temp. 39 (6) (2022) 436-445. https://doi.org/10.1080/09603409.2022.2041847
- H.-Y. Lee, J.-Y. Jeong, Quantification of conservatism in pressure vessel design subjected to long-term creep conditions as per ASME Section VIII Division 2, Int. J. Pres. Ves. Pip. 180 (2020) 1~15.
- RCC-MRx, Section 1 Subsection B, Class 1 N1RX Reactor Components, AFCEN, Lyon, France, 2018.
- ASME, BPVC.CC.NC.S4-2019 Code Case N-898, Use of Alloy 617 (UNS N06617) for Class A Elevated Temperature Service Construction III Division 5, New York, 2019.
- H.-Y. Lee, J. Eoh, J.-Y. Jeong, Elevated temperature design and integrity evaluation of a large-scale sodium test facility, STELLA-2, Nucl. Eng. Des. 346 (2019) 54-66. https://doi.org/10.1016/j.nucengdes.2019.02.024
- J. Eoh, J. Lee, H. Kim, J. Yoon, H.-Y. Lee, J.-Y. Jeong, Sodium Thermal-hydraulic Test for Design Validation of Prototype Gen-IV Sodium-Cooled Fast Reactor, ICAPP, Charlotte, NC, 2018. April 8-11.
- H.-Y. Lee, M.-G. Won, N.-S. Huh, HITEP_RCC-MRX program for the support of elevated temperature design evaluation and defect assessment, J. pres. Ves. Tech., Trans. ASME 141 (2019). October, 051205_1-05120513. https://doi.org/10.1115/1.4043916
- H.-Y. Lee, M.-G. Won, S.-K. Son, N.-S. Huh, Development of a program for high-temperature design evaluation according to RCC-MRx, Nucl. Eng. Des. 324 (2017) 181-195. https://doi.org/10.1016/j.nucengdes.2017.08.034
- H.-Y. Lee, J. Yoon, J. Lee, J. Eoh, High-temperature design of 700 ℃ heat exchanger in a large scale high-temperature thermal energy storage performance test facility, in: ASME PVP 2022 Conference, July 17-22, Las Vegas, Nevada, USA, 2022.
- ASME, BPVC Section III, Rules for Construction of Nuclear Power Plant Components, Division 1, Subsection NB, Class 1 Components, ASME, New York, 2019.
- ASME, BPVC.CC.NC.S4-2017 Code Case N-872, Use of 52Ni-22Cr-13Co-9Mo Alloy 617 (UNS N06617) for Low Temperature Service Construction III Division 5, New York, 2017.
- H.-Y. Lee, Y.-W. Kim, K.-N. Song, Preliminary application of the draft code case for alloy 617 for a high temperature component, J. Mech. Sci. Technol. 22 (5) (2008) 856-863. https://doi.org/10.1007/s12206-008-0118-1
- RCC-MRx, Section III Subsection Z, Appendix A3, AFCEN, Lyon, France, 2018.
- ASME, BPVC Section II, Part A, Ferrous Material Specifications, ASME, New York, 2021.
- ASME, BPVC Section II, Part D, Properties (Metric), ASME, New York, 2021.
- RCC-MRx, Section III Tome 2 Materials, AFCEN, 2018. Lyon, France.
- ASME, Boiler and Pressure Vessel Code, Section VIII, Division 2, Alternative Rules, American Society of Mechanical Engineers, New York, 2021.
- ASME, Boiler and Pressure Vessel Code, Code Case 2843-2, Analysis of Class 2 Components in the Time-dependent Regime e Section VIII Division 2, American Society of Mechanical Engineers, New York, 2019.
- D.-H. Ha, S.-J. Kim, H.-Y. Lee, J. Lee, Low cycle fatigue behavior and life evaluation of Type 316L stainless steel at 700 ℃, Trans. KSME A 46 (7) (2022) 655-662. https://doi.org/10.3795/KSME-A.2022.46.7.655
- D.-H. Ha, H.-Y. Lee, S.-J. Kim, J. Eoh, Proposition of high-temperature fatigue properties for the application of type 316L stainless steel in 700 ℃ high-temperature design, Trans. KSME A 46 (12) (2022) 1033-1039. https://doi.org/10.3795/KSME-A.2022.46.12.1033
- H.-Y. Lee, H. Kim, J. Eoh, High-temperature design of 700 ℃ heat exchanger in a large scale high-temperature thermal energy storage performance test facility,, in preparation, J. Press. Vessel Technol., Trans. ASME (2023).
- ASTM E139, Standard Test Methods for Conducting Creep, Creep-Rupture and Stress-Rupture Tests of Metallic Materials, ASTM, 2021.
- Guide for Introducing a New Material in the RCC-MRx, AFCEN/RX.17.006, AFCEN, Lyon, France, 2017.
- Data Acceptability Criteria and Data Generation: Generic Recommendations for Creep, Creep Rupture, Stress Rupture and Stress Relaxation Data, ECCC Recommendations - Volume 3 Part I [Issue 5], European Creep Collaborative Committee, 2001.
- H. Kim, J. Yoon, Y.-H. Shin, J. Lee, Study and Proposal on Requirements and Operational Logic of Thermal Energy Storage (ESS) Systems Using Liquid-Metal Cooling Systems, 2022. KAERI/TR-9184/2022.