Acknowledgement
이 연구는 2023년 인천시 반도체 후공정 소부장 산업경쟁력 강화사업 및 한국생산기술연구원의 지원을 받아 수행 되었습니다.
References
- H. Ma and J. C. Suhling, "A review of mechanical properties of lead-free solders for electronic packaging", J. Mater. Sci., 44(5), 1141 (2009).
- J. Glazer, "Microstructure and mechanical properties of Pb-free solder alloys for low-cost electronic assembly: a review", J. Electron. Mater., 23(8), 693 (1994). https://doi.org/10.1007/BF02651361
- X. Ma, F. Wang, Y. Qian, and F. Yoshida, "Development of Cu-Sn intermetallic compound at Pb-free solder/Cu joint interface", Mater. Lett., 57(22), 3361 (2003).
- K. Tu and R. Thompson, "Kinetics of interfacial reaction in bimetallic Cu-Sn thin films", Acta Metall., 30(5), 947 (1982).
- L. Xu, J. H. Pang, and F. Che, "Impact of thermal cycling on Sn-Ag-Cu solder joints and board-level drop reliability", J. Electron. Mater., 37(6), 880 (2008).
- R. E. Pratt, E. I. Stromswold, and D. J. Quesnel, "Effect of solid-state intermetallic growth on the fracture toughness of Cu/63Sn-37Pb solder joints", IEEE Trans. Compon. Packag. Manuf. Technol., 19(1), 134 (1996).
- F. Song and S. R. Lee, "Investigation of IMC thickness effect on the lead-free solder ball attachment strength: comparison between ball shear test and cold bump pull test results", Proc. 56th Electronic Components and Technology Conference (ECTC), San Diego, CA, USA, 1196, IEEE (2006).
- C.-S. Chung and H.-K. Kim, "Mechanical Behavior of Sn-3.0Ag-0.5Cu/Cu Solder Joints After Isothermal Aging", J. Electron. Mater., 45(1), 125 (2016). https://doi.org/10.1007/s11664-015-4170-1
- J.-W. Yoon, B.-I. Noh, and S.-B. Jung, "Comparison of Interfacial Stability of Pb-Free Solders (Sn-3.5 Ag, Sn-3.5Ag-0.7Cu, and Sn-0.7Cu) on ENIG-Plated Cu During Aging", IEEE Trans. Compon. Packag. Manuf. Technol., 33(1), 64 (2010).
- C.-L. Yeh and Y.-S. Lai, "Effects of solder alloy constitutive relationships on impact force responses of package-level solder joints under ball impact test", J. Electron. Mater., 35(10), 1892 (2006).
- I. Anderson, J. Foley, B. A. Cook, J. Harringa, R. Terpstra, and O. Unal, "Alloying effects in near-eutectic Sn-Ag-Cu solder alloys for improved microstructural stability", J. Electron. Mater., 30(9), 1050 (2001).
- Y. Li, K.-S. Moon, and C. Wong, "Electronics without lead", Science, 308(5727), 1419 (2005).
- K. Kanlayasiri and K. Sukpimai, "Effects of indium on the intermetallic layer between low-Ag SAC0307-xIn lead-free solders and Cu substrate", J. Alloys Compd., 668, 169 (2016).
- T. Laurila, V. Vuorinen, and J. Kivilahti, "Interfacial reactions between lead-free solders and common base materials", Mater. Sci. Eng. R Rep., 49(1), 1 (2005).
- A. Sharif, Y. Chan, and R. A. Islam, "Effect of volume in interfacial reaction between eutectic Sn-Pb solder and Cu metallization in microelectronic packaging", Mater. Sci. Eng. B., 106(2), 120 (2004).
- J. Zhao, L. Qi, X.-M. Wang, and L. Wang, "Influence of Bi on microstructures evolution and mechanical properties in Sn-Ag-Cu lead-free solder", J. Alloys Compd., 375(1), 196 (2004).
- L. Xu, J. H. Pang, K. H. Prakash, and T. Low, "Isothermal and thermal cycling aging on IMC growth rate in lead-free and lead-based solder interface", IEEE Trans. Compon. Packag. Manuf. Technol., 28(3), 408 (2005).
- W. Peng, E. Monlevade, and M. E. Marques, "Effect of thermal aging on the interfacial structure of SnAgCu solder joints on Cu", Microelectron. Reliab., 47(12), 2161 (2007).
- M. G. Cho, S. K. Kang, D.-Y. Shih, and H. M. Lee, "Effects of minor additions of Zn on interfacial reactions of Sn-Ag-Cu and Sn-Cu solders with various Cu substrates during thermal aging", J. Electron. Mater., 36(11), 1501 (2007). https://doi.org/10.1007/s11664-007-0254-x
- C. C. Lee, P. J. Wang, and J. S. Kim, "Are intermetallics in solder joints really brittle?", Proc. 57th Electronic Components and Technology Conference (ECTC), Sparks, NV, USA, 648, IEEE (2007).
- L. Gao, S. Xue, L. Zhang, Z. Sheng, F. Ji, W. Dai, S.-L. Yu, and G. Zeng, "Effect of alloying elements on properties and microstructures of SnAgCu solders", Microelectron. Eng., 87(11), 2025 (2010).
- C. Wu, D. Yu, C. Law, and L. Wang, "Properties of lead-free solder alloys with rare earth element additions", Mater. Sci. Eng. R Rep., 44(1), 1 (2004).
- Y. Wang, X. Zhao, X. Xie, Y. Gu, and Y. Liu, "Effects of nano-SiO2 particles addition on the microstructure, wettability, joint shear force and the interfacial IMC growth of Sn3.0Ag0.5Cu solder", J. Mater. Sci. Mater. Electron., 26(12), 9387 (2015).
- Y. Tang, G. Li, and Y. Pan, "Influence of TiO2 nanoparticles on IMC growth in Sn-3.0Ag-0.5Cu-xTiO2 solder joints in reflow process", J. Alloys Compd., 554, 195 (2013).
- L. Tsao, "Suppressing effect of 0.5 wt.% nano-TiO2 addition into Sn-3.5Ag-0.5Cu solder alloy on the intermetallic growth with Cu substrate during isothermal aging", J. Alloys Compd., 509(33), 8441 (2011).
- S. Chellvarajoo and M. Abdullah, "Microstructure and mechanical properties of Pb-free Sn-3.0Ag-0.5Cu solder pastes added with NiO nanoparticles after reflow soldering process", Mater. Des., 90, 499 (2016).
- A. K. Gain, T. Fouzder, Y. C. Chan, and W. K. Yung, "Microstructure, kinetic analysis and hardness of Sn-Ag-Cu-1wt% nano-ZrO2 composite solder on OSP-Cu pads", J. Alloys Compd., 509(7), 3319 (2011).
- Y. K. Jee, Y. H. Ko, and J. Yu, "Effect of Zn on the intermetallics formation and reliability of Sn-3.5Ag solder on a Cu pad", J. Mater. Res., 22(07), 1879 (2007).
- S. K. Kang, D. Leonard, D.-Y. Shih, L. Gignac, D. Henderson, S. Cho, and J. Yu, "Interfacial reactions of Sn-Ag-Cu solders modified by minor Zn alloying addition", J. Electron. Mater., 35(3), 479 (2006).
- L. Zhang, S. B. Xue, G. Zeng, L. L. Gao, and H. Ye, "Interface reaction between SnAgCu/SnAgCuCe solders and Cu substrate subjected to thermal cycling and isothermal aging", J. Alloys Compd., 510(1), 38 (2012).
- M. Rizvi, Y. Chan, C. Bailey, H. Lu, and M. Islam, "Effect of adding 1wt% Bi into the Sn-2.8Ag-0.5Cu solder alloy on the intermetallic formations with Cu-substrate during soldering and isothermal aging", J. Alloys Compd., 407(1), 208 (2006).
- S. Nai, J. Wei, and M. Gupta, "Interfacial intermetallic growth and shear strength of lead-free composite solder joints", J. Alloys Compd., 473(1), 100 (2009).
- X. Hu, Y. Chan, K. Zhang, and K. Yung, "Effect of graphene doping on microstructural and mechanical properties of Sn-8Zn-3Bi solder joints together with electromigration analysis", J. Alloys Compd., 580, 162 (2013).
- D. Ma and P. Wu, "Improved microstructure and mechanical properties for Sn58Bi0.7Zn solder joint by addition of graphene nanosheets", J. Alloys Compd., 671, 127 (2016).
- K. S. Novoselov, A. K. Geim, S. V. Morozov, D.-E. Jiang, Y. Zhang, S. V. Dubonos, I. V. Grigorieva, and A. A. Firsov, "Electric field effect in atomically thin carbon films", Science, 306(5696), 666 (2004).
- C. Lee, X. Wei, J. W. Kysar, and J. Hone, "Measurement of the elastic properties and intrinsic strength of monolayer graphene", Science, 321(5887), 385 (2008).
- A. K. Geim and K. S. Novoselov, "The rise of graphene", Nat. Mater., 6(3), 183 (2007).
- S. H. Lee, D. H. Lee, W. J. Lee, and S. O. Kim, "Tailored assembly of carbon nanotubes and graphene", Adv. Funct. Mater., 21(8), 1338 (2011).
- Y.-H. Ko, J.-D. Lee, T. Yoon, C.-W. Lee, and T.-S. Kim, "Controlling interfacial reactions and intermetallic compound growth at the interface of a lead-free solder joint with layer-by-layer transferred graphene", ACS Appl. Mater. Interfaces, 8(8), 5679 (2016). https://doi.org/10.1021/acsami.5b11903
- G. Lu, B. Lin, Z. Gao, W. Zhang, Y. Li, F. Wei, Y. Sui, J. Qi, Q. Meng, and Y. Ren, "Nickel Nanoparticle/Carbon Films as an Interlayer To Improve the Stability of Solder Joints", ACS Appl. Nano Mater, 6(7), 5844 (2023).
- G. Lu, Z. Gao, B. Lin, Y. Li, F. Wei, Y. Sui, J. Qi, Q. Meng, Y. Ren, and Q. Yan, "Effects of Co Nanoparticles Embedded in Carbon Skeleton Nanosheet Addition to Sn-0.7Cu Solder on the Interfacial Reaction", ACS Appl. Nano Mater, 6(2), 1413 (2023).
- Y. Li, S. Yu, L. Li, S. Song, W. Qin, D. Qi, W. Yang, and Y. Zhan, "A Review on the Development of Adding Graphene to Sn-Based Lead-Free Solder", Metals, 13(7), 1209 (2023).
- Y.-H. Ko, K. Son, G. Kim, Y.-B. Park, D.-Y. Yu, J. Bang, and T.-S. Kim, "Effects of graphene oxide on the electromigration lifetime of lead-free solder joints", J. Mater. Sci. Mater. Electron., 30, 2334 (2019).
- X. Yin, C. Wu, Z. Zhang, W. Yang, C. Xie, X. Yang, and Z. Huang, "Highly reliable Cu-Cu low temperature bonding using SAC305 solder with rGO interlayer", Microelectron. Reliab., 129, 114483 (2022).
- A. Ferrari, J. Meyer, V. Scardaci, C. Casiraghi, M. Lazzeri, F. Mauri, S. Piscanec, D. Jiang, K. Novoselov, and S. Roth, "Raman spectrum of graphene and graphene layers", Phys. Rev. Lett., 97(18), 187401 (2006).
- L. M. Lee and A. A. Mohamad, "Interfacial reaction of Sn-Ag-Cu Lead-Free solder alloy on Cu: a review", Adv. Mater. Sci. Eng., 2013, 1 (2013).
- W. K. Choi and H. M. Lee, "Effect of soldering and aging time on interfacial microstructure and growth of intermetallic compounds between Sn-3.5Ag solder alloy and Cu substrate", J. Electron. Mater., 29(10), 1207 (2000). https://doi.org/10.1007/s11664-000-0014-7
- X. Deng, R. Sidhu, P. Johnson, and N. Chawla, "Influence of reflow and thermal aging on the shear strength and fracture behavior of Sn-3.5Ag solder/Cu joints", Metall. Mater. Trans. A, 36(1), 55 (2005).
- J.-W. Yoon, S.-W. Kim, and S.-B. Jung, "IMC growth and shear strength of Sn-Ag-Bi-In/Au/Ni/Cu BGA joints during aging", Mater. Trans., 45(3), 727 (2004).
- C.-H. Wang, H.-H. Chen, P.-Y. Li, and P.-Y. Chu, "Kinetic analysis of Ni5Zn21 growth at the interface between Sn-Zn solders and Ni", Intermetallics, 22, 166 (2012).
- F. Gao and J. Qu, "Calculating the diffusivity of Cu and Sn in Cu3Sn intermetallic by molecular dynamics simulations", Mater. Lett., 73, 92 (2012).
- S. Malola, H. Hakkinen, and P. Koskinen, "Gold in graphene: in-plane adsorption and diffusion", Appl. Phys. Lett., 94(4), 043106 (2009).
- J. A. RodriGuez-Manzo, O. Cretu, and F. Banhart, "Trapping of metal atoms in vacancies of carbon nanotubes and graphene", ACS Nano, 4(6), 3422 (2010).