Journal of the Korean Wood Science and Technology

The Korean Society of Wood Science & Technology (한국목재공학회)
권호 표지
DOI QR코드

DOI QR Code

Study on the Combustion Characteristics of Tulip Tree (Liriodendron tulipifera) for Use as Interior Building Materials

  • Min Ji KIM (Forest Product and Industry Department, National Institute of Forest Science) ;
  • Sang-Joon LEE (Forest Product and Industry Department, National Institute of Forest Science) ;
  • Sejong KIM (Forest Product and Industry Department, National Institute of Forest Science) ;
  • Myung Sun YANG (Forest Product and Industry Department, National Institute of Forest Science) ;
  • Dong Won SON (Forest Product and Industry Department, National Institute of Forest Science) ;
  • Chul-Ki KIM (Forest Product and Industry Department, National Institute of Forest Science)
  • Received : 2023.03.07
  • Accepted : 2023.08.29
  • Published : 2023.09.25
Download PDF
⟨ Previous Next ⟩

Abstract

In this study, the combustion characteristics of the Tulip tree, which is the representative broad-leaved afforestation tree in Korea, were analyzed. The flame retardant performance of the Tulip tree was analyzed by analyzing combustion characteristics on a total of three test samples; flame retardant treated, both flame retardant and oil stain-treated, and untreated. Then the flame retardance grade was classified for each of them. According to the result, test samples showed the strongest flame retardance were in order of flame retardant treated (C), both flame retardant and oil stain-treated (B), and untreated (A). As a result of analyzing the total heat emission and maximum heat emission rates, which is the evaluation standard for interior materials of Korean domestic buildings, test samples with flame retardant treat or flame retardant and oil stain treat were qualified for the flame-retardant standard. Both flame retardant and oil stain-treated samples showed higher total heat release (THR) and heat release rate compared to flame retardant-treated samples as the oil causes combustion with oxygen. On the other hand, they didn't qualify the THR in Quasi-non-combustible standards. To determine the correlation between the physical and combustion characteristics of wood, the combustion characteristics of other diffuse porous wood species, with which the Tulip tree is affiliated were analyzed, and noticed that the characteristic correlates with the density and quantity of wood. The results of this study are expected to be used as basic information on the combustion characteristics of the Tulip tree.

Keywords

References

  1. Abraham, C.J. 1996. A solution to spontaneous combustion in linseed oil formulations. Polymer Degradation and Stability 54(2-3): 157-166. https://doi.org/10.1016/S0141-3910(96)00039-0
  2. Ahn, K.S., Pang, S.J., Oh, J.K. 2021. Prediction of withdrawal resistance of single screw on Korean wood products. Journal of the Korean Wood Science and Technology 49(1): 93-102. https://doi.org/10.5658/WOOD.2021.49.1.93
  3. Bergman, R., Puettmann, M., Taylor, A., Skog, K.E. 2014. The carbon impacts of wood products. Forest Products Journal 64(7-8): 220-231. https://doi.org/10.13073/FPJ-D-14-00047
  4. Cho, K.H., Lee, B.W., Yun, M.O. 2019. A study on combustion characteristics of finishing materials in interior decoration. Journal of the Korean Institute of Gas 23(4): 10-18.
  5. Ghani, R.S.M., Lee, M.D. 2021. Challenges of wood modification process for plantation eucalyptus: A review of Australian setting. Journal of the Korean Wood Science and Technology 49(2): 191-209.
  6. Grexa, O., Lubke, H. 2001. Flammability parameters of wood tested on a cone calorimeter. Polymer Degradation and Stability 74(3): 427-432. https://doi.org/10.1016/S0141-3910(01)00181-1
  7. Jin, E., Chung, Y.J. 2018. Fire risk of wood treated with boron compounds by combustion test. Fire Science and Engineering 32(3): 19-26. https://doi.org/10.7731/KIFSE.2018.32.3.019
  8. Jung, H.S., Yoo, T.K., Kwon, J.Y. 1998. Effects of double surfaces finishing on acoustical properties of soundboard for traditional musical instruments. Journal of the Korean Wood Science and Technology 26(4): 26-33.
  9. Kang, C.W., Lee, Y.H., Kang, H.Y., Kang, W., Xu, H., Chung, W.Y. 2011. Radial variation of sound ab- sorption capability in the cross sectional surface of yellow poplar wood. Journal of the Korean Wood Science and Technology 39(4): 326-332. https://doi.org/10.5658/WOOD.2011.39.4.326
  10. Kim, H.J. 2018. Study on the internal temperature of flame resistant treated wood exposed to a standard fire. Fire Science and Engineering 32(3): 14-18. https://doi.org/10.7731/KIFSE.2018.32.3.014
  11. Kim, J., Lee, J.H., Kim, S. 2012. Estimating the fire behavior of wood flooring using a cone calorimeter. Journal of Thermal Analysis and Calorimetry 110(2): 677-683. https://doi.org/10.1007/s10973-011-1902-1
  12. Kim, J.H., Song, H. 2016. Flame resistance performance of architectural membrane according to woven fabrics and coating materials. Journal of the Korea Institute of Building Construction 16(6): 545-551. https://doi.org/10.5345/JKIBC.2016.16.6.545
  13. Kim, S., Kim, M.J., Son, D.W. 2021. Combustion characteristics of domestic softwoods according to the amount of flame retardant absorption. Journal of the Korea Furniture Society 32(4): 437-441.
  14. Kim, T. 2013. The species selection and planting guidelines for street tree to reduce road atmospheric carbon dioxide. Journal of Korean Institute of Forest Recreation 17(1): 131-144. https://doi.org/10.34272/forest.2013.17.1.014
  15. Lee, C.K., Jung, W.S., Lee, D.H. 2004. Fire characteristics of composites for interior panels using cone calorimeter. Journal of the Korean Society for Railway 7(1): 140-144.
  16. Lee, J.J., Kim, C.K. 2022. Tomosynthesis feasibility study for visualization of interiors of wood columns surrounded with walls. Journal of the Korean Wood Science and Technology 50(4): 246-255. https://doi.org/10.5658/WOOD.2022.50.4.246
  17. Liu, Y., Xu, J., Wen, M., Park, H.J., Zhu, J., Liu, Y. 2021. Research on flame retardant plywood with different flame retardants. Journal of the Korean Wood Science and Technology 49(6): 667-678. https://doi.org/10.5658/WOOD.2021.49.6.667
  18. Park, K.S., Seo, I.S., Lee, H.H., Kang, S.G. 2014. Coating effect of low temperature melting Bi-Sn metalized wood composites on 10 different Korean wood species. Journal of the Korea Furniture Society 25(3): 223-232. https://doi.org/10.22873/KOFUSO.2014.25.3.223
  19. Park, S., Han, Y., Son, D.W. 2020. Flame retardancy of wood products by spreading concentration and impregnation time of flame retardant. Journal of the Korean Wood Science and Technology 48(4): 417-430. https://doi.org/10.5658/WOOD.2020.48.4.417
  20. Park, S., Han, Y., Son, D.W. 2021. Flame retardancy of plywood treated with various water glass concentration and additives. Journal of the Korean Wood Science and Technology 49(1): 44-56. https://doi.org/10.5658/WOOD.2021.49.1.44
  21. Ragland, K.W., Aerts, D.J., Baker, A.J. 1991. Properties of wood for combustion analysis. Bioresource Technology 37(2): 161-168. https://doi.org/10.1016/0960-8524(91)90205-X
  22. Ryu, K.O., Jang, S.S., Choi, W.Y., Kim, H.E. 2003. Growth performance and adaptation of Liriodendron tulipifera in Korea. Journal of Korean Forestry Society 92(6): 515-525.
  23. Schulz, H.R., Acosta, A.P., Barbosa, K.T., da Silva Junior, M.A.P., Gallio, E., de Avila Delucis, R., Gatto, D.A. 2021. Chemical, mechanical, thermal, and colorimetric features of the thermally treated Eucalyptus grandis wood planted in Brazil. Journal of the Korean Wood Science and Technology 49(3): 226-233. https://doi.org/10.5658/WOOD.2021.49.3.226
  24. Seo, H.J., Kang, M.R., Park, J.E., Son, D.W. 2016. Combustion characteristics of useful imported woods. Journal of the Korean Wood Science and Technology 44(1): 19-29. https://doi.org/10.5658/WOOD.2016.44.1.19
  25. Seo, H.J., Kang, M.R., Son, D.W. 2015. Combustion properties of woods for indoor use (II). Journal of the Korean Wood Science and Technology 43(4): 478-485. https://doi.org/10.5658/WOOD.2015.43.4.478
  26. Son, D.W., Kang, M.R. 2015. Combustion characteristics of fire retardants treated wood (I). Journal of the Korean Wood Science and Technology 43(1): 96-103. https://doi.org/10.5658/WOOD.2015.43.1.96
  27. Son, D.W., Kang, S.G. 2014. Combustion properties of woods for indoor use (I). Journal of the Korean Wood Science and Technology 42(6): 675-681.
  28. Song, D., Kim, K. 2022. Influence of manufacturing environment on delamination of mixed cross laminated timber using polyurethane adhesive. Journal of the Korean Wood Science and Technology 50(3): 167-178. https://doi.org/10.5658/WOOD.2022.50.3.167
  29. Wang, L.S., Kang, H.B., Wang, S.B., Liu, Y., Wang, R. 2007. Solubilities, thermostabilities and flame retardance behaviour of phosphorus-containing flame retardants and copolymers. Fluid Phase Equilibria 258(2): 99-107. https://doi.org/10.1016/j.fluid.2007.04.031
  30. Wen, M.Y., Zhu, J.Z., Zhu, M., Sun, Y.X., Park, H.J., Shi, J. 2020. Research on flame retardant formaldehyde-free plywood glued by aqueous polymer isocyanate adhesive. Journal of the Korean Wood Science and Technology 48(5): 755-764. https://doi.org/10.5658/WOOD.2020.48.5.755
  31. Xu, J., Liu, Y., Wen, M., Park, H.J., Zhu, J., Liu, Y. 2021. Preparation of flame retardant and antibacterial wood with composite membrane coating. Journal of the Korean Wood Science and Technology 49(6): 658-666. https://doi.org/10.5658/WOOD.2021.49.6.658
  32. Xu, Q., Chen, L., Harries, K.A., Zhang, F., Liu, Q., Feng, J. 2015. Combustion and charring properties of five common constructional wood species from cone calorimeter tests. Construction and Building Materials 96: 416-427. https://doi.org/10.1016/j.conbuildmat.2015.08.062