Acknowledgement
This project is co-financed from the state budget by the Technology Agency of the Czech Republic within the TK04030168 and TK03020034 THETA Programme and was supported by IAEA CRP ATF-TS project.
References
- Project Tk03020034 - Utilization of Advanced Materials for New Types of Nuclear Fuels, Technology Agency of the Czech Republic, 2020-2023.
- S. Nikulin, Zirconium Alloys for Nuclear Power Reactors, MISiS, Moscow, 2007.
- A. Savchenko, I. Konovalov, T. Totev, Metmet Fuel with Zirconium Matrix Alloys, 2008.
- A. Savchenko, A. Vatulin, G. Kulakov, K. Lipkina, V. Sorokin, A. Morozov, S. Ershov, O. Uferov, E. Mainikov, A. Kozlov, Peculiarities of fuel cycle with advanced composite fuel for thermal reactors, Progress in Nuclear Energy 72 (2014) 119-125. https://doi.org/10.1016/j.pnucene.2013.10.007
- Suwardi, Thermal performance prediction of fuel pin containing u-9mo/zralloy produced by capillary impregnation technique for high burnup pwr, Jurnal Teknologi Bahan Nuklir; ISSN 1907-2635. 7 (2011).
- G. Beghi, Gamma Phase Uranium-Molybdenum Fuel Alloys, European Atomic Energy Community -EURATOM, Joint Nuclear Research Center, Italy, 1968.
- P. Suk, Kobylka, D. Sevecek, F. Fejt, Neutronic Performance of Vver-1200 Reactor with Advanced Fuel and Cladding Materials, Nuclear Engineering and Design (????). (submitted for publication.
- O. Safarzadeh, M. Qarani-tamai, Full-core reactor physics analysis for accident tolerant cladding in a vver-1000 reactor, Annals of Nuclear Energy 155 (2021), 108163.
- F. Fejt, M. Sevecek, J. Frybort, O. Novak, Study on neutronics of vver-1200 with accident tolerant fuel cladding, Annals of Nuclear Energy 124 (2019) 579-591. https://doi.org/10.1016/j.anucene.2018.10.040
- J. Leppanen, Serpent-a Continuous-Energy Monte Carlo Reactor Physics Burnup Calculation Code, vol. 4, VTT Technical Research Centre of Finland, 2013.
- J. Leppanen, Serpent - a Continuous-Energy Monte Carlo Reactor Physics Burnup Calculation Code, 2015.