Textile Science and Engineering (한국섬유공학회지)

The Korean Fiber Society (한국섬유공학회)
권호 표지
DOI QR코드

DOI QR Code

Shape Change by Heat Treatment of the Braid Used as a Substrate for the Composite Hollow Fiber Membrane

복합중공사막 브레이드 지지체의 열처리에 따른 형태 변화

  • Hongwon Park (Digital Transformation (DX) Research Department, Korea High Tech Textile Research Institute) ;
  • Jonghoon Kim (Digital Transformation (DX) Research Department, Korea High Tech Textile Research Institute) ;
  • Jonghyung Woo (Digital Transformation (DX) Research Department, Korea High Tech Textile Research Institute) ;
  • Hoyoung Lee (Digital Transformation (DX) Research Department, Korea High Tech Textile Research Institute) ;
  • Seongbin Park (Digital Transformation (DX) Research Department, Korea High Tech Textile Research Institute)
  • 박홍원 (한국섬유소재연구원 DX 혁신본부) ;
  • 김종훈 (한국섬유소재연구원 DX 혁신본부) ;
  • 우종형 (한국섬유소재연구원 DX 혁신본부) ;
  • 이호영 (한국섬유소재연구원 DX 혁신본부) ;
  • 박성빈 (한국섬유소재연구원 DX 혁신본부)
  • Received : 2023.04.10
  • Accepted : 2023.04.28
  • Published : 2023.06.30
⟨ Previous Next ⟩

Abstract

The composite hollow fiber membrane is a ultra filtration made by coating a polymer mixture on the surface of the braid, which is a substrate. Compared to a single membrane, it has excellent strength, durability and life time. In this study, we tried to develop a heat treatment method to flatten the surface of the braid used as a fiber support for the composite hollow fiber membrane and improve the circularity of the cross section. A heat treatment device capable of controlling temperature and take-up speed was devised, and braids were heat treated with various conditions. As a result of comparing surface and cross-section images, it was observed that the surface of the specimen treated at 220 ℃ or higher was flattened by heat treatment and the cross-section became closer to a circular shape. And it was found that the lower take-up speed, the larger the diameter change due to heat shrinkage.

Keywords

Acknowledgement

본 연구는 산업통상자원부 소재부품기술개발사업(20010447)의 지원으로 수행되었음.

References

  1. S. Lee, S. Lee, K. Kim, T. Kwon, J. Park, S. Bae, G. Lee, and I. Kim, "The Opimization of Ozine Solubility and Half Life Time in Ultra Pure Water and Alkaline Solution on Semiconductor Wet Cleaning Process", J. Semiconductor & Display Equipment Technology, 2005, 4, 19-26.
  2. H. Lee, D. Segets, S. Suss, W. Peukert, S. Chen, and D. Pui, "Liquid Filtration of Nanoparticles Through Track-etched Membrane Filters under Unfavorable and Different Ionic Strength Conditions: Experiments and Modeling", J. Membr. Sci., 2017, 524, 682-690. https://doi.org/10.1016/j.memsci.2016.11.023
  3. J. Lee, "Braiding", Fiber Technol. Ind., 2003, 7, 190-204.
  4. D. Brunnschweiler, "Braids and Braiding", J. Text. Ind., 1953, 44, 666.
  5. D. Brunnschweiler, "The Structure and Tensile Properties of Braids", J. Text. Ind., 1954, 45, 55-87. https://doi.org/10.1080/19447025408662631
  6. K. Choo and Y. Kwang, "A Study on the Characteristics of Elastic Braid(I)-Geometric Theory of Elastic Braid Structure", J. Korean Fiber Soc., 1985, 22, 23-33.
  7. K. Choo and Y. Kwang, "A Study on the Characteristics of Elastic Braid(II)-Effect of Manufacturing Condition on the Characteristics of Elastic Braid", J. Korean Fiber Soc., 1985, 22, 34-42.
  8. S. Cha, T. Kang, and J. Kim, "Study on the Braided Polyester Cord and Rubber Composite(ll) - Fatigue Resistance", J. Korean Fiber Soc., 1995, 32, 752-759.
  9. D. Lee, H. Kim, and J. Choi, "Tensile Properties of Tubular Braided Fiber Reinforced Thermoplastic Composites", J. Korean Fiber Soc., 1999, 36, 162-167.
  10. D. Lee, H. Kim, J. Rhee, M. Seo, J. Choi, S. Lee, and T. Ma, "A Study on the Textile Properties of Brid Reinforced Thermoplastic Composite - Effects of Middle-end Yarn and Axial Yarn", J. Korean Fiber Soc., 2000, 37, 590-595.
  11. G. W. Taylor, "The Melting Point of Polyethylene Terephthalate", Polymer, 1962, 3, 543-547. https://doi.org/10.1016/0032-3861(62)90101-5
  12. S. A. Jabarin and E. A. Lofgren, "Thermal Stability of Polyethylene Terephthalate", Polym. Eng. Sci., 1984, 13, 1056-1063. https://doi.org/10.1002/pen.760241311
  13. A. K. van der Vegt and L. E. Govaert, "Polymeren: van keten tot kunstof", VSSD, 2005.
  14. S. Niu and T. Wakida, "Effect of Heat-setting Temperature on Alkali Hydrolysis of Poly(ethylene terephthalate) Fibers", Text. Res. J., 1993, 63, 346-350. https://doi.org/10.1177/004051759306300606
  15. K. Lee, S. Jo, and K. Joo, "The Fabric Drape Property Measurement Using a Circularity", J. Korea Institute of Maritime Information & Communication Sci., 2004, 8, 185-191.