Rubber Technology (고무기술)

The Rubber Society of Korea (한국고무학회)
권호 표지

고압수소용 고무소재에 대한 사용 적합성 평가 기술

  • 전상구 (한국표준과학연구원 수소에너지소재연구팀)
  • Published : 2023.06.30
Download PDF
⟨ Previous Next ⟩

Abstract

Keywords

References

  1. 이세나, 일본 압축수소 충전소 사고 현황, 한국가스학회 춘계학술대회 (2021)
  2. 2장 김영훈, 수소충전소용 고압용기 플러그 체결부 설계적정성 검증 마련을 위한 실증 연구, 한국 수소 및 신에너지 학회 추계학술대회 (2022)
  3. ANSI/CSA CHMC-2 Test methods for evaluating material compatibility in compressed hydrogen application - polymers, CSA group, (2019).
  4. ISO 14687 Hydrogen fuel quality-product specification, (2019)
  5. J. Yamabe, S. Nishimura, Tensile Properties and Swelling Behavior of Sealing Rubber Materials Exposed to High-Pressure Hydrogen Gas, J. Solid Mech. Mater. Eng. 6 (2012) 466-477. https://doi.org/10.1299/jmmp.6.466
  6. J. Yamabe, S. Nishimura, Influence of fillers on hydrogen penetration properties and blister fracture of rubber composites for O-ring exposed to high-pressure hydrogen gas, Int. J. Hydrogen Energy. 34 (2009) 1977-1989. https://doi.org/10.1016/j.ijhydene.2008.11.105
  7. H. Fujiwara, H. Ono, S. Nishimura, Degradation behavior of acrylonitrile butadiene rubber after cyclic high-pressure hydrogen exposure, Int. J. Hydrogen Energy. 40 (2015) 2025-2034. https://doi.org/10.1016/j.ijhydene.2014.11.106
  8. S. Castagnet, H. Ono, G. Benoit, H. Fujiwara, S. Nishimura, Swelling measurement during sorption and decompression in a NBR exposed to hihg-pressure hydrogen, Int. Hydrogen Energy. 42 (2017) 19359-19366. https://doi.org/10.1016/j.ijhydene.2017.06.138
  9. J. Yamabe, A. koga, S. Nishimura, Failure behavior of rubber O-ring under cyclic exposure to high-pressure hydrogen gas, Eng. Fail. Anal. 35 (2013) 193-205. https://doi.org/10.1016/j.engfailanal.2013.01.034
  10. J. Yamabe, T. Matsumoto, S. Nishimura, Application of acoustic emission method to detection of internal fracture of sealing rubber material by high-pressure hydrogen decompression, Polym. Test. 30 (2011) 76-85. https://doi.org/10.1016/j.polymertesting.2010.11.002
  11. H. Fujiwara, J. Yamabe, S. Nishimura, Evaluation of the change in chemical structure of acrylonitrile butadiene rubber after high-pressure hydrogen exposure, Int. J. Hydrogen Energy. 37 (2012) 8729-8733. https://doi.org/10.1016/j.ijhydene.2012.02.084
  12. N. C. Menon, Behaviour of polymers in high pressure environments as applicable to the hydrogen infrastructure, Proc. ASME 2016 Press. Vessel. Pip. Conf. (2016) 1-16.
  13. N. C. Menon, A. M. Kruizenga, A. Nissen, B. E. Mills, J. Campbell, Polymer behavior in high pressure hydrogen, helium and argon environments as applicable to the hydrogen infrastructure, Proc. 7th international conference on hydrogen safety (2017) 819-831.
  14. 정재갑, 전상구, 백운봉, 남승훈, 전자저울을 이용한 고무에서 수소기체의 장입량 및 확산도 측정기술 개발, 한국 수소 및 신에너지학회 32, (2021) 116-126 https://doi.org/10.7316/KHNES.2021.32.2.116
  15. J. K. Jung, I. G. Kim, S. K. Jeon, K. T. Kim, U. B. Baek, S. H. Nahm, Volumetric analysis technique for analyzing the transport properties of hydrogen gas in cylindrical-shaped rubbery polymers, Polym. Test. 99 (2021) 107147-1-9. https://doi.org/10.1016/j.polymertesting.2021.107147
  16. J. K. Jung, I. G. Kim, K. T. Kim, K. S. Ryu, K. S. Chung, Evaluation technique of hydrogen permeation in sealing rubber materials, Polym. Test. 93 (2021) 107016-1-10. https://doi.org/10.1016/j.polymertesting.2020.107016
  17. J. S. Jang, C. J. Kim, N. K. Chung, Temperature-dependence study on the hydrogen transport properties of polymers used for hydrogen infrastructure, Appl. Sci. Converg. Technol., 30 (2021) 163-166. https://doi.org/10.5757/ASCT.2021.30.6.163
  18. S. K. Jeon, J. K. Jung, N. K. Chung, U. B. Baek, S. H. Nahm, Investigation of physical and mechanical characteristics of rubber materials exposed to high-pressure hydrogen, Polymers, 14 (2022) 2233-1-16.
  19. S. K. Jeon, O. H. Kwon, N. T. Tak, N. K. Chung, U. B. Baek, S. H. Nahm, Relationship between properties and rapid decompression (RGD) resistance of various filled nitrile butadiene rubber vulcanizates under high-pressure hydrogen, Mater. Today Commun., 30 (2022) 103038-1-10.
  20. ISO 23936-2 Petroleum, petrochemical and natural gas industries-nonmetallic materials in contact with media related to oil and gas production part 2: elastomers (2011)