Acknowledgement
This research was supported in part by the National Research Foundation of Korea (NRF) grant funded by the Korea government (MSIT) (No. 2022R1A2C4001255).
References
- C. Han, M. Choi, I. T. Kim, J. J. Lee, J. Y. Lee, J. C. An, J. Shim, and H. K. Lee, Manufacture and Evaluation of Small Size PEMFC Stack Using Carbon Composite Bipolar Plate, Journal of the Korean Electrochemical Society, 13, 81 (2010). Doi: https://doi.org/10.5229/jkes.2010.13.2.081
- C.M. Kim and K. Y. Kim, A study on economic analysis of new renewable energy power (photovoltaic, wind power, small hydro, biogas), Journal of the Korean Solar Energy Society, 28, 70 (2008). Doi: http://www.koreascience.or.kr/article/JAKO200819463917993.page
- A. Pozio, F. Zaza, A. Masci, and R. F. Silva, Bipolar plate materials for PEMFCs: a conductivity and stability study, Journal of Power Sources, 179, 631 (2008). Doi: https://doi.org/10.1016/j.jpowsour.2008.01.038
- T. Zhongfu, Z. Chen, L. Pingkuo, B. Reed, and Z. Jiayao, Focus on fuel cell systems in China, Renewable and Sustainable Energy Reviews, 47, 912 (2015). Doi: https://doi.org/10.1016/j.rser.2015.03.057
- D. H. Shin and S. J. Kim, Effects of Temperature and Chloride Concentration on Electrochemical Characteristics and Damage Behavior of 316L Stainless Steel for PEMFC Metallic Bipolar Plate, Corrosion Science and Technology, 21, 300 (2022). Doi: https://doi.org/10.14773/cst.2022.21.4.300
- N. G. Moreno, M. C. Molina, D. Gervasio, and J. F. P. Robles, Approaches to polymer electrolyte membrane fuel cells (PEMFCs) and their cost, Renewable and Sustainable Energy Reviews, 52, 897 (2015). Doi: https://doi.org/10.1016/j.rser.2015.07.157
- J. Wu, X. Z. Yuan, J.J. Martin, H. Wang, J. Zhang, J. Shen, S. Wu, and W. Merida, A review of PEM fuel cell durability: Degradation mechanisms and mitigation strategies, Journal of Power Sources, 184, 104 (2008). Doi: https://doi.org/10.1016/j.jpowsour.2008.06.006
- N. F. Asri, T. Husaini, A. B. Sulong, E. H. Majlan, and W. R. W. Dau, Coating of stainless steel and titanium bipolar plates for anticorrosion in PEMFC: A review, International Journal of Hydrogen Energy, 42, 9135 (2017). Doi: https://doi.org/10.1016/j.ijhydene.2016.06.241
- S. Lee and S. H. Jin, Single Cell Performance Recovery of SO2 Poisioned PEMFC using Cyclic Voltametry, Journal of Korean Applied Science and Technology, 28, 497 (2011). Doi: https://doi.org/10.12925/jkocs.2011.28.4.15
- R. A. Antunes, M. C. L. Oliveira, G. Ett, and V. Ett, Corrosion of metal bipolar plates for PEM fuel cells: A review. International journal of hydrogen energy, 35, 3632 (2010). Doi: https://doi.org/10.1016/j.ijhydene.2010.01.059
- L. Peng, P. Yi, and X. Lai, Design and manufacturing of stainless steel bipolar plates for proton exchange membrane fuel cells, International Journal of Hydrogen Energy, 39, 21127 (2014). Doi: https://doi.org/10.1016/j.ijhydene.2014.08.113
- Y. K. Jung, Thesis, pp. 8 - 11, Pukyong National University, Busan (2022).
- K. Kang, S. Park, and H. Ju, Effects of type of graphite conductive filler on the performance of a composite bipolar plate for fuel cells, Solid State Ionics, 262, 332 (2014). Doi: https://doi.org/10.1016/j.ssi.2013.11.024
- S. Y. Cha and J. B. Lee, Effect of Pretreatments on Graphene Coated Bipolar Plate of PEMFC on Electrochemical, Corrosion Science and Technology, 13, 224 (2014). Doi: https://doi.org/10.14773/cst.2014.13.6.224
- L. Wang, D. O. Northwood, X. Nie, J. Housden, E. Spain, A. Leyland, and A. Matthews, Corrosion properties and contact resistance of TiN, TiAlN and CrN coatings in simulated proton exchange membrane fuel cell environments, Journal of Power Sources, 195, 3814 (2010). Doi: https://doi.org/10.1016/j.jpowsour.2009.12.127
- N. D. L. Heras, E. P. L. Roberts, R. Langton, and D. R. Hodgson, A review of metal separator plate materials suitable for automotive PEM fuel cells, Energy & Environmental Science, 2, 206 (2009). Doi: https://doi.org/10.1039/b813231n
- A. Kraytsberg, M. Auinat, and Y. Ein-Eli, Reduced contact resistance of PEM fuel cell's bipolar plates via surface texturing, Journal of Power Sources, 164, 697 (2007). Doi: https://doi.org/10.1016/j.jpowsour.2006.11.033
- B. Avasarala and P. Haldar, Effect of surface roughness of composite bipolar plates on the contact resistance of a proton exchange membrane fuel cell, Journal of Power Sources, 188, 225 (2009). Doi: https://doi.org/10.1016/j.jpowsour.2008.11.063
- D. P. Davies, P. L. Adcock, M. Turpin, and S. J. Rowen, Bipolar plate materials for solid polymer fuel cells, Journal of power sources, 86, 237 (2000). Doi: https://doi.org/ 10.1016/s0378-7753(99)00524-8
- D. Zhang, Z. Wang, and K. Huang, Composite coatings with in situ formation for Fe-Ni-Cr alloy as bipolar plate of PEMFC, International journal of hydrogen energy, 38, 11379 (2013). Doi: https://doi.org/10.1016/j.ijhydene.2013.06.112
- K. Feng, Z. Li, H. Sun, L. Yu, X. Cai, Y. Wu, and P. K. Chu, C/CrN multilayer coating for polymer electrolyte membrane fuel cell metallic bipolar plates, Journal of power sources, 222, 351 (2013). Doi: https://doi.org/10.1016/j.jpowsour.2012.08.087
- J. S. Kim, W. H. A. Peelen, K. Hemmes, and R. C. Makkus, Effect of alloying elements on the contact resistance and the passivation behaviour of stainless steels, Corrosion Science, 44, 635 (2002). Doi: https://doi.org/10.1016/s0010-938x(01)00107-x
- S. Y. Cha and J. B. Lee, Evaluation of Electrochemical Characteristics on Graphene Coated Austenitic and Martensitic Stainless Steels for Metallic Bipolar Plates in PEMFC Fabricated with Hydrazine Reduction Methods, Corrosion Science and Technology, 15, 92 (2016). Doi: https://doi.org/10.14773/cst.2016.15.2.92
- K. M. Kim and K. Y. Kim, A new alloy design concept for austenitic stainless steel with tungsten modification for bipolar plate application in PEMFC, Journal of Power Sources, 173, 917 (2007). Doi: https://doi.org/10.1016/j.jpowsour.2007.08.047
- K. Feng, Z. Li, C. Yao, and Y. Wu, Evaluation of Mg-Nd-Zn-Zr magnesium alloy as bipolar plate in simulated polymer electrolyte membrane fuel cell environments, International Journal of Hydrogen Energy, 41, 14191 (2016). Doi: https://doi.org/10.1016/j.ijhydene.2016.05.179
- J. Wind, R. Spah, W. Kaizer, and G. Bohm, Metallic bipolar plates for PEM fuel cells, Journal of Power Sources, 105, 256 (2002). Doi: https://doi.org/10.1016/S0378-7753(01)00950-8
- P. L. Hentall, J. B. Lakeman, G. O. Mepsted, P. L. Adocock, and J. M. Moore, New materials for polymer electrolyte membrane fuel cell current collectors, Journal of Power Sources, 80, 235 (1999). Doi: https://doi.org/10.1016/S0378-7753(98)00264-X
- S. H. Wang, J. Peng, W. B. Lui, and J. S. Zhang, Performance of the gold-plated titanium bipolar plates for the light weight PEM fuel cells, Journal of Power Sources, 162, 486 (2006). Doi: https://doi.org/10.1016/j.jpowsour.2006.06.084
- Y. Wang and D. O. Northwood, An investigation into polypyrrole-coated 316L stainless steel as a bipolar plate material for PEM fuel cells, Journal of Power Sources, 163, 500 (2006). Doi: https://doi.org/10.1016/j.jpowsour.2006.09.048
- Y. J. Ren, J. Chen, and C. L. Zeng, Corrosion protection of type 304 stainless steel bipolar plates of proton-exchange membrane fuel cells by doped polyaniline coating, Journal of Power Sources, 195, 1914 (2010). Doi: https://doi.org/10.1016/j.jpowsour.2009.10.003
- H. Xue, T. Wang, H. Huo, X. Fan, Z. Zhu, X. Pan, and J. He, In situ synthesis of graphene/carbon nanotube modified ordered mesoporous carbon as protective film of stainless steel bipolar plates for proton exchange membrane fuel cells, RSE Advances, 4, 57724 (2014). Doi: https://doi.org/10.1039/c4ra09939g
- H. Kahraman, I. Cevik, F. Dundar, and F. Ficici, The Corrosion Resistance Behaviors of Metallic Bipolar Plates for PEMFC Coated with Physical Vapor Deposition (PVD): An Experimental Study, Arabian Journal for Science and Engineering, 41, 1961 (2016). Doi: https://doi.org/10.1007/s13369-016-2058-x
- R. Tian, Chromium nitride/Cr coated 316L stainless steel as bipolar plate for proton exchange membrane fuel cell, Journal of Power Sources, 196, 1258 (2011). Doi: https://doi.org/10.1016/j.jpowsour.2010.08.028
- R. Rani, N. Kumar, D. D. Kumar, K. Panda, S. K. Srivastava, S. Dash, and A. K. Tyagi, Improvement in wear resistance of C+ ion implanted DC magnetron sputtered TiC film, Tribology International, 104, 121 (2016). Doi: https://doi.org/10.1016/j.triboint.2016.08.033
- T. J. Pan, Y. J. Dai, J. Jiang, J. H. Xiang, Q. Q. Yang, and Y. S. Li, Anti-corrosion performance of the conductive bilayer CrC/CrN coated 304SS bipolar plate in acidic environment, Corrosion Science, 206, 110495 (2002). Doi: https://doi.org/10.1016/j.corsci.2022.110495
- I. H. Oh, and J. B. Lee, Corrosion Behaviors of 316L Stainless Steel Bipolar Plate of PEMFC and Measurements of Interfacial Contact Resistance(ICR) between Gas Diffusion Layer(GDL) and Bipolar Plate, Corrosion Science and Technology, 9, 129 (2010). Doi: https://doi.org/10.14773/cst.2010.9.3.129
- Y. Wang and D. O. Northwood, Effect of substrate material on the corrosion of TiN-coated stainless steels in simulated anode and cathode environments of proton exchange membrane fuel cells, Journal of Power Sources, 191, 483 (2009). Doi: https://doi.org/10.1016/j.jpowsour.2009.02.029
- D. N. Staicipolus, The Role of Cementite in the Acidic Corrosion of Steel, Journal of The Electrochemical Society, 110, 1121 (1963). Doi: https://doi.org/10.1149/1.2425602
- E. H. Hwang, H. G. Seong, and S. J. Kim, Effect of Carbon Contents on Corrosion and Hydrogen Diffusion Behaviors of Ultra-Strong Steels for Automotive Applications, Korean Journal of Metals and Materials, 56, 570 (2018). Doi: http://dx.doi.org/10.3365/KJMM.2018.56.8.570
- V. Kain, K. Chandra, K. N. Adhe, and P. K. De, Effrct of cold work on tlow-temperature sensitization behavior of austenitic stainless steels, Journal of nuclear materials, 334, 115 (2004). Doi: https://doi.org/10.1016/j.jnucmat.2004.05.008
- C. T. Kwok, K. H. Lo, W. K. Chan, F. T. Cheng, and H. C. Man, Effect of laser surface melting on intergranular corrosion behaviour of aged austenitic and duplex stainless steels, Corrosion Science, 53, 1581 (2011). Doi: https://doi.org/10.1016/j.corsci.2011.01.048
- S. X. Lin, W. K. Bao, J. Gao, and J. B. Wang, Intergranular Corrosion of Austenitic Stainless Steel, Applied Mechanics and Materials, 229, 14 (2012). Doi: https://doi.org/10.4028/www.scientific.net/AMM.229-231.14
- D. S. Won and W. G. Lee, Improvement of Polycarbonate Properties by Coating of TiO2 and SiO2 Thin Film, Journal of Industrial and Engineering Chemistry, 25, 14 (2014). Doi: https://doi.org/10.14478/ace.2013.1095
- B. Beverskog, J. O. Carlsson, and A. D. Bauer, Corrosion properties of TiC films prepared by activated reactive evaporation, Surface and Coating Technology, 41, 221 (1990). Doi: https://doi.org/10.1016/0257-8972(90)90170-h
- V. Marimuthu, I. Dulac, and K. Kannoorpatti, Significance of Pourbaix diagrams to study the corrosion behavior of hardfacing alloys based on chromium carbides at 298 K (25 ℃), Journal of Bio- and Tribo-Corrosion, 2, 17 (2016). Doi: https://doi.org/10.1007/s40735-016-0047-y
- J. W. Kang, J. M. Park, S. H. Hwang, S. H. Lee, K. M. Moon, and M. H. Lee, Influence of Heat Treatment and Magnesium Content on Corrosion Resistance of Al-Mg Coated Steel Sheet, Journal of Surface Science and Engineering, 49, 202 (2016). Doi: https://doi.org/10.5695/jkise.2016.49.2.202
- J. Shi, P. Zhang, Y. Han, H. Wang, X. Wang Y. Yu, and J. Sun, Investigation on electrochemical behavior and surface conductivity of titanium carbide modified Ti bipolar plate of PEMFC, International Journal of Hydrogen Energy, 45, 10050 (2020). Doi: https://doi.org/10.1016/j.ijhydene.2020.01.203
- W. Meng, H. Zhu, X. Wang, G. Li, Y. Fan, D. Sun, and F. Kong, Electrochemical Behavior and Surface Conductivity of C/TiC Nanocomposite Coating on Titanium for PEMFC Bipolar Plate, Metals, 12, 771 (2022). Doi: https://doi.org/10.3390/met12050771
- J. Li, Z. Xu, Y. Li, X. Ma, J. Mo, L. Weng, and C. Liu, Intergranular passivation of the TiC coating for enhancing corrosion resistance and surface conductivity in stainless-steel bipolar plates, Journal of Materials Science, 56, 8689 (2021). Doi: https://doi.org/10.1007/s10853-020-05733-w
- Y. J. Ren and C. L. Zeng, Corrosion protection of 304 stainless steel bipolar plates using TiC films produced by high-energy micro-arc alloying process, Journal of Power Sources, 171, 778 (2007). Doi: https://doi.org/10.1016/j.jpowsour.2007.06.075