한국임상수의학회지 (Journal of Veterinary Clinics)

  • 제40권4호
  • /
  • Pages.268-275
  • /
  • 2023
  • /
  • 1598-298X(pISSN)
  • /
  • 2384-0749(eISSN)
한국임상수의학회 (The Korean Society of Veterinary Clinics)
권호 표지
DOI QR코드

DOI QR Code

Application of Patient-Specific 3D-Printed Orthopedic Splint for Bone Fracture in Small Breed Dogs

  • Kwangsik Jang (Department of Veterinary Surgery, College of Veterinary Medicine and BK21 FOUR Program, Chonnam National University) ;
  • Eun Joo Jang (Department of Veterinary Surgery, College of Veterinary Medicine and BK21 FOUR Program, Chonnam National University) ;
  • Yo Han Min (Department of Veterinary Surgery, College of Veterinary Medicine and BK21 FOUR Program, Chonnam National University) ;
  • Kyung Mi Shim (Department of Veterinary Surgery, College of Veterinary Medicine and BK21 FOUR Program, Chonnam National University) ;
  • Chunsik Bae (Department of Veterinary Surgery, College of Veterinary Medicine and BK21 FOUR Program, Chonnam National University) ;
  • Seong Soo Kang (Department of Veterinary Surgery, College of Veterinary Medicine and BK21 FOUR Program, Chonnam National University) ;
  • Se Eun Kim (Department of Veterinary Surgery, College of Veterinary Medicine and BK21 FOUR Program, Chonnam National University)
  • 투고 : 2023.04.30
  • 심사 : 2023.07.16
  • 발행 : 2023.08.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

In this paper, we designed 3D-printed orthopedic splint models for patient-specific external coaptation on fracture healing and analyzed the stability of the models through finite element method (FEM) analysis under compressive load conditions. Polylactic acid (PLA) and acrylonitrile-butadiene-styrene (ABS) based 3D splint models of the thicknesses 1, 3, 5 and 7 mm were designed, and Peak von Mises stress (PVMS) and maximum displacement (MD) of the models were analyzed by FEM under compressive loads of 50, 100, 150, and 200 N. The FEM results indicated that PVMS and MD values, regardless of material, had a negative correlation with the thickness of the models and a positive correlation with the compressive load. There was a risk of splint deformation under conditions more extreme than 100 N with 5 mm thickness. For successful clinical application of 3D-printed orthopedic splints in veterinary medicine, it is recommended that the splint should be produced not less than 5 mm thickness. Also, it is expected to be stable when the splint is applied to situations with a compressive load of 100 N or less. There is an advantage of overcoming the limitations of the existing bandage method through 3D-printing technology as well as verifying the stability through 3D modeling before application. Such 3D printing technology will be widely used in veterinary medicine and various fields as well as orthopedics.

키워드

과제정보

This study was financially supported by Chonnam National University (Grant number : 2021-2429).

참고문헌

  1. Aguado Perez J. 3D printed orthosis design. Valencia: Universitat Politecnica de Valencia; 2018. [thesis]. 
  2. Besancon MF, Conzemius MG, Evans RB, Ritter MJ. Distribution of vertical forces in the pads of Greyhounds and Labrador Retrievers during walking. Am J Vet Res 2004; 65: 1497-1501.  https://doi.org/10.2460/ajvr.2004.65.1497
  3. Bronniche Moller Nielsen M, Pedersen T, Mouritzen A, Vitger AD, Nielsen LN, Poulsen HH, et al. Kinetic gait analysis in healthy dogs and dogs with osteoarthritis: an evaluation of precision and overlap performance of a pressure-sensitive walkway and the use of symmetry indices. PLoS One 2020; 15: e0243819. 
  4. Brydone AS, Meek D, Maclaine S. Bone grafting, orthopaedic biomaterials, and the clinical need for bone engineering. Proc Inst Mech Eng H 2010; 224: 1329-1343.  https://doi.org/10.1243/09544119JEIM770
  5. Campbell BH, inventor. Adjustable splint for the leg of an animal. United States patent US 5,134,992. Aug 4, 1992. 
  6. Chen Y, Lin H, Yu Q, Zhang X, Wang D, Shi L, et al. Application of 3D-printed orthopedic cast for the treatment of forearm fractures: finite element analysis and comparative clinical assessment. Biomed Res Int 2020; 2020: 9569530. 
  7. Chen YJ, Lin H, Zhang X, Huang W, Shi L, Wang D. Application of 3D-printed and patient-specific cast for the treatment of distal radius fractures: initial experience. 3D Print Med 2017; 3: 11. 
  8. Clinician's Brief Web site. Bandaging complications. Available at: https://www.cliniciansbrief.com/article/bandaging-complications. Accessed Apr 25, 2023. 
  9. Crump SS, inventor; Stratasys Inc., assignee. Apparatus and method for creating three-dimensional objects. United States patent US 5,121,329A. Jun 9, 1992. 
  10. Damon A, Clifton W, Valero-Moreno F, Nottmeier E. Orientation planning in the fused deposition modeling 3D printing of anatomical spine models. Cureus 2020; 12: e7081. 
  11. DeAngelis B, inventor. DeAngelis B, assignee. Protective shields for protecting the limbs of injured animals. United States patent US 10,028,856 B1. Jul 24, 2018. 
  12. dos Santos JF, Ferrigno CRA, Dal-Bo IS, Caquias DFI. Nonunion fractures in small animals - a literature review. Semin Cienc Agrar 2016; 37: 3223-3230.  https://doi.org/10.5433/1679-0359.2016v37n5p3223
  13. Hencky H. Zur theorie plastischer deformationen und der hierdurch im material hervorgerufenen nachspannungen. J Appl Math Mech 1924; 4: 323-334. German.  https://doi.org/10.1002/zamm.19240040405
  14. Jung DY, Kim BJ, Oh JK. A finite element analysis of biomechanical stability of compression plate fixation system in according to existing of fracture gap after bone fracture augmentation. J Korean Fract Soc 2010; 23: 83-89.  https://doi.org/10.12671/jkfs.2010.23.1.83
  15. Keosengthong A, Kampa N, Jitpean S, Seesupa S, Kunkitti P, Hoisang S. Incidence and classification of bone fracture in dogs and cats: a retrospective study at veterinary teaching hospital, Khon Kaen university, Thailand (2013-2016). Vet Integr Sci 2019; 17: 127-139. 
  16. Kim J, Kazmierczak KA, Breur GJ. Comparison of temporospatial and kinetic variables of walking in small and large dogs on a pressure-sensing walkway. Am J Vet Res 2011; 72: 1171-1177.  https://doi.org/10.2460/ajvr.72.9.1171
  17. Kim YK. 3D printing market and technology trends. S&T Mark Rep 2019; 70: 1-21. 
  18. Ku JH, Kim IK, Chang JW, Yang JE, Sasikala B, Wang B. The three dimensional finite element analysis of stress distribution and displacement in mandible according to treatment modalities of mandibular angle fractures. J Korean Assoc Maxillofac Plast Reconstr Surg 2010; 32: 207-217. 
  19. Lee SH, Kim BI. Analytical study on characteristics of von Mises yield criterion under plane strain condition. JKAIS 2015; 16: 6391-6396.  https://doi.org/10.5762/KAIS.2015.16.9.6391
  20. Li J, Tanaka H. Rapid customization system for 3D-printed splint using programmable modeling technique - a practical approach. 3D Print Med 2018; 4: 5. 
  21. Lin H, Shi L, Wang D. A rapid and intelligent designing technique for patient-specific and 3D-printed orthopedic cast. 3D Print Med 2015; 2: 4. 
  22. Reeping JA, inventor. Device for protecting casts, splints or bandages applied to animal appendages. United States patent US 6,000,366. Dec 14, 1999. 
  23. Schulz KS, Hayashi K. Principles of fracture diagnoses and management. In: Fossum TW, Duprey LP editors. Small animal surgery. 5th ed. Philadelphia: Elsevier. 2019: 981-1023. 
  24. Shin IY, Oh KM. Proposal of finger splint design using design guidelines to reflect user requirements - using FDM 3D printing technology -. Des Converg Stud 2019; 18: 1-14.  https://doi.org/10.31678/SDC.78.1
  25. Simpson AM, Radlinsky MA, Beale BS. Bandaging in dogs and cats: external coaptation. Compend Contin Educ Pract Vet 2001; 23: 157-164.