DOI QR코드

DOI QR Code

커튼월의 내진성능 향상을 위한 시제품 개발 및 실험

Prototype Development and Experimentation to Improve the Seismic Performance of Curtain walls

  • 민병준 (충북대학교 방재학과) ;
  • 원정훈 (충북대학교 방재학과) ;
  • 전진우 (긴키테크코리아) ;
  • 강현욱 (광주대학교 건축학부 건축공학과)
  • Min, Byoung jun (Department of Disaster Prevention Engineering, Chungbuk National University) ;
  • Won, Jeong hun (Department of Disaster Prevention Engineering, Chungbuk National University) ;
  • Jeon Jin woo (Kinki Tec Korea) ;
  • Kang, Hyun Wook (Department of Architectural Engineering, Gwangju University)
  • 투고 : 2022.12.13
  • 심사 : 2023.06.12
  • 발행 : 2023.07.31

초록

본 연구의 목적은 커튼월의 내진성능을 향상시킨 커튼월 제품을 개발하고, 층간변위시험을 실시하여 내진성능을 검증하는 것이다. 이를 위하여 (재)한국건설생활환경시험연구원의 옥외실증센터에서 커튼월 시험체를 2개층 이상으로 제작하고 지진하중과 유사한 변위량을 유발한 후 커튼월의 파손상태를 확인하였다. 1차 시험을 실시한 결과, 내진등급(특) 기준에서는 커튼월 시제품의 프레임과 유리 파손이 발생되지 않았으나, 내진등급(I)과 내진등급(II ) 기준에서는 Weather Sealant가 일부 파손되었다. 그리고 AAMA 501.6(동적내진시험)에서 정한 최대 층간변위량 150mm를 가압하였을 때 유리가 파손되는 현상이 발생되었다. 2차 시험을 실시한 결과, 내진등급(특), 내진등급(I), 내진등급(II), AAMA 501.6에서 유리가 파손되는 문제가 발생되지 않았다. 따라서, 본 커튼월 시제품의 내진성능 시험을 실시한 (재)한국건설생활환경시험연구원에서 2016년 9월 경주 5.8 규모와 2017년 11월 포항 5.4 규모의 지진에도 커튼월 프레임과 프레임 간의 탈락, Weather Sealant의 찢어짐 그리고 유리가 파손되는 피해가 없을 것으로 사료된다는 판단을 받았다.

The purpose of this study is to develop a prototype curtain wall with improved seismic performance and to verify the seismic performance by conducting an inter-floor displacement test. To this end, a prototype of the curtain wall was manufactured and a displacement similar to the earthquake load was induced, and then the damaged state of the curtain wall was checked. As a result of the first test, the frame and glass of the curtain wall were not damaged, but the Weather Sealant was partially damaged. As a result of the second test, there was no problem of glass breakage in seismic class (special), seismic class (I), seismic class (II), and AAMA 501.6. Through this experiment, the seismic performance of the curtain wall prototype was verified.

키워드

과제정보

본 연구는 2023년도 광주대학교 대학 연구비의 지원을 받아 수행되었음.

참고문헌

  1. Bedon, C., Langed, X., Santos, F., Bonfi, D., Kozlowski, M., Arrigoni, M., Figuli, L., and Langed. D. (2018). "Performance of Structural Glass Facades under Extreme Loads." Construction and Building Materials, 163, pp. 921-937. https://doi.org/10.1016/j.conbuildmat.2017.12.153
  2. Casagrande, L., Bonati, A., Occhiuzzi, A., Caterino, N., and Auricchio, F. (2019). "Numerial Investigation on the Seismic Dissipation of Glazed Curtain Wall Equipped on High-Rise Buildings." Engineering Structures, 179, pp. 225-245. https://doi.org/10.1016/j.engstruct.2018.10.086
  3. Caterino, N. Zoppo, M., Maddaloni, G., Bonati, A., Cavanna, G., and Occhiuzzi. A. (2017). "Seismic Assessment and Finite Element Modelling of Glazed Curtain Walls." Structural Engineering and Mechanics, 61(1), pp. 77-90. https://doi.org/10.12989/sem.2017.61.1.077
  4. Jeong, Daun (2019). "A Study on the Seismic Design Process considering In-Plame Seismic Load of Aluminum Glazing Curtain Wall System." Mater Degree Thesis. Department of Architectural Engineering Hanyang University.
  5. Kwak, E.S., Ki, C.G., Lee, S.H., Shon, S.D., and Lee, S.J. (2017). "A Study on the Structural Performance of the Building Exterior Panel Using the Moving Clips." Journal of the Architectural Institute of Korea Structure & Construction, 33(12), pp. 29-36.
  6. Oh. S.H., Choi, K.Y., Ryu, H.S., and Kim, Y.J. (2018). "An Experiment Study on Verification for the Performance of Seismic Retrofit System Using of Dual Frame With Different Eigenperiod." Journal of the Korea Institute for Structural Maintenance and Inspection, 22(5), pp. 91-100.
  7. Park, N.W., Chang, K.K., and Seo, D.W. (2013). "Seismic Performance Evaluation of Stone Finished Curtain Walls." Journal of the Architectural Institute of Korea, 33(1), pp. 333-334.
  8. Shin, J.W., Oh, S.H., and Yang, W.J. (2021). "Review of Selection Technique of Design Seismic Wave According to Seismic Design Standards for Buildings." Journal of the Architectural Institute of Korea, 37(6), pp. 199-207.