Nuclear Engineering and Technology

  • 제55권6호
  • /
  • Pages.2053-2068
  • /
  • 2023
  • /
  • 1738-5733(pISSN)
  • /
  • 2234-358X(eISSN)
한국원자력학회 (Korean Nuclear Society)
권호 표지
DOI QR코드

DOI QR Code

Investigation on damage assessment of fiber-reinforced prestressed concrete containment under temperature and subsequent internal pressure

  • Zhi Zheng (College of Civil Engineering, Taiyuan University of Technology) ;
  • Yong Wang (College of Civil Engineering, Taiyuan University of Technology) ;
  • Shuai Huang (College of Civil Engineering, Taiyuan University of Technology) ;
  • Xiaolan Pan (College of Civil Engineering, Taiyuan University of Technology) ;
  • Chunyang Su (College of Civil Engineering, Taiyuan University of Technology) ;
  • Ye Sun (College of Civil Engineering, Taiyuan University of Technology)
  • 투고 : 2022.10.30
  • 심사 : 2023.02.26
  • 발행 : 2023.06.25
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Following a loss of coolant accident (LOCA), prestressing concrete containment vessels (PCCVs) may experience high thermal load as well as internal pressure. The high temperature stress would increase the risk of premature damage to the containment, which reduces the safety margin during the increasing internal pressure. However, current investigations cannot clearly address the issues of thermal-pressure coupling effect on damage propagation and thus safety of the containment. Thus, this paper offers three simple and powerful damage parameters to differentiate the severity of damage of the containment. Moreover, despite of the temperature action severely threatening the pressure performance of the containment, the research regarding the improvement of the resistant performance of the containment is quite scarce. Therefore, in this paper, a comprehensive comparison of damage propagation and mechanism between conventional and fiber-reinforced concrete (FRC) containments is performed. The effects of fiber characteristics parameters on damage propagation of structures following the LOCA are also specifically revealed. It is found that the proposed damage indices can properly indicate state of damage in the containment body and the addition of fiber can be used to obviously mitigate the damage propagation in PCCV considering the thermal-pressure coupling.

키워드

과제정보

This investigation is supported by National Natural Science Foundation of China (No. 51908397, 52208191), Shanxi Province Science Foundation for Youths (No. 201901D211025), China Postdoctoral Science Foundation (No. 2019M651075, No. 2020M670695). These supports are greatly appreciated.

참고문헌

  1. A. Labib, M.J. Harris, Learning how to learn from failures: the Fukushima nuclear disaster, Eng. Fail. Anal. 47 (2015) 117-128. https://doi.org/10.1016/j.engfailanal.2014.10.002
  2. S.K. Sharma, D.K. Bhartia, N. Mohan, Options for management of Containment Integrity during severe accident in Indian PHWR, Nucl. Eng. Des. 323 (2017) 386-393. https://doi.org/10.1016/j.nucengdes.2017.04.002
  3. T.F. Kanzleiter, Experimental investigations of pressure and temperature loads on a containment after a loss-of-coolant accident, Nucl. Eng. Des. 38 (1) (1976) 159-167. https://doi.org/10.1016/0029-5493(76)90093-5
  4. J.J. Carbajo, Heat transfer coefficients under LOCA conditions in containment buildings, Nucl. Eng. Des. 65 (3) (1981) 369-386. https://doi.org/10.1016/0029-5493(81)90100-X
  5. Z. Lin, J. Yan, The temperature field of PCCV of nuclear power station under atmosphere circumstance, J. Build. Struct. 36 (6) (2003) 12-17 ([in Chinese]).
  6. R.A. Dameron, B.E. Hansen, M.F. Hessheimer, Analysis of a 1:4-scale prestressing concrete containment vessel model for severe accident thermal and pressure loading, in: 18th International Conference on Structural Mechanics in Reactor Technology, 2005.
  7. J. Li, Y. Wang, Calculation and analysis of temperature and stress fields for nuclear power plants under temperature effect of LOCA accident, Ind. Constr. S1 (2010) 300-305 ([in Chinese]).
  8. C. Wu, S. Meng, Z. Zhou, Analyses on temperature field distribution and internal force of concrete containment vessel after loca, Eng. Mech. 27 (12) (2010) 206-212.
  9. F. Sun, R. Pan, G. Chai, L. Li, Preliminary study on response law of prestressing concrete containment after LOCA in certain NPP, Atomic Energy Sci. Technol. 49 (10) (2015) 1815-1820 ([in Chinese]).
  10. A. Shokoohfar, A. Rahai, Nonlinear analysis of pre-stressed concrete containment vessel (PCCV) using the damage plasticity model, Nucl. Eng. Des. 298 (2016) 41-50. https://doi.org/10.1016/j.nucengdes.2015.12.019
  11. S. Wang, Analytical evaluation of the dome-cylinder interface of nuclear concrete containment subjected to internal pressure and thermal load, Eng. Struct. 161 (2018) 1-7. https://doi.org/10.1016/j.engstruct.2018.01.063
  12. Z. Wang, J. Yan, Y. Lin, T. Fang, J. Ma, Study on failure mechanism of prestressing concrete containments following a loss of coolant accident, Eng. Struct. 202 (2020), 109860.
  13. S. Jalasutram, D.R. Sahoo, V. Matsagar, Experimental investigation of the mechanical properties of basalt fiber-reinforced concrete, Struct. Concr. 18 (2) (2017) 292-302. https://doi.org/10.1002/suco.201500216
  14. A.H. Akca, N. Ozyurt, Deterioration and recovery of FRC after high temperature € exposure, Cement Concr. Compos. 93 (2018) 260-273. https://doi.org/10.1016/j.cemconcomp.2018.07.020
  15. L. Sun, Q. Hao, J. Zhao, D. Wu, F. Yang, Stress strain behavior of hybrid steel-PVA fiber reinforced cementitious composites under uniaxial compression, Construct. Build. Mater. 188 (2018) 349-360. https://doi.org/10.1016/j.conbuildmat.2018.08.128
  16. S.S. Joshi, N. Thammishetti, S.S. Prakash, S. Jain, Cracking and ductility analysis of steel fiber-reinforced prestressing concrete beams in flexure, ACI Struct. J. 115 (6) (2018) 1575-1588. https://doi.org/10.14359/51706827
  17. J. Eidan, I. Rasoolan, A. Rezaeian, D. Poorveis, Residual mechanical properties of polypropylene fiber-reinforced concrete after heating, Construct. Build. Mater. 198 (2019) 195-206. https://doi.org/10.1016/j.conbuildmat.2018.11.209
  18. L. Xu, B. Huang, B. Li, C. Yin, C. Li, Y. Shi, Study on the stress-strain relation of polypropylene fiber reinforced concrete under cyclic compression, China Civ. Eng. J. 52 (4) (2019) 1-12. https://doi.org/10.1155/2018/9174943
  19. M.F.R. Anik, M.R. Shihan, F.L. Brinta, S.R. Chowdhury, A review paper on increasing torsional strength of RC beam using steel fiber reinforced concrete, J. Struct. Eng. Appl.Anal. 3 (1, 2) (2020).
  20. P. Zhang, L. Kang, J. Wang, J. Guo, S. Hu, Y. Ling, Mechanical properties and explosive spalling behavior of steel-fiber-reinforced concrete exposed to high temperature-a review, Appl. Sci. 10 (7) (2020) 2324.
  21. Y.S. Choun, H.K. Park, Containment performance evaluation of prestressing concrete containment vessels with fiber reinforcement, Nucl. Eng. Technol. 47 (7) (2015) 884-894. https://doi.org/10.1016/j.net.2015.07.003
  22. Z. Zheng, Y. Sun, X. Pan, C. Su, J. Kong, The optimum steel fiber reinforcement for prestressing concrete containment under internal pressure, Nucl. Eng. Technol. 54 (6) (2022) 2156-2172. https://doi.org/10.1016/j.net.2021.12.015
  23. P. Anderson, Analytic study of the steel liner near the equipment hatch in a 1: 4 scale containment model, Nucl. Eng. Des. 238 (7) (2008) 1641-1650. https://doi.org/10.1016/j.nucengdes.2007.12.013
  24. ABAQUS, ABAQUS Standard User's Manual, Version 6.14, Dassault Systemes Corp, Providence, 2012.
  25. The Ministry of Construction of the People's Republic of China, MOC, Standard for Design of Steel Structures. GB50017-2017, Chinese standard, 2017.
  26. J. Lubliner, J. Oliver, S. Oller, E. Onate, A plastic-damage model for concrete, Int. J. Solid Struct. 25 (3) (1989) 299-326. https://doi.org/10.1016/0020-7683(89)90050-4
  27. The Ministry of Construction of the People's Republic of China, Code for Design of Concrete Structures, 2010. GB50010-2010.
  28. F. Sidoroff, Description of anisotropic damage application to elasticity, in: Physical Non-linearities in Structural Analysis, 1981, pp. 237-244.
  29. R. Guo, Performance of steel fiber reinforced concrete (SFRC) and its application in civil engineering, Adv. Mater. Res. 788 (2013) 550-553. https://doi.org/10.4028/www.scientific.net/AMR.788.550
  30. D. Gao, Study on uniaxial tension stress-strain relation of steel fiber reinforced concrete, Water Power 11 (1991) 54-58.
  31. D. Gao, Study on uniaxial compression stress-strain relation of steel fiber reinforced concrete, J. Hydraul. Eng. 10 (1991) 43-48.
  32. X. Xie, G. Yang, D. Gao, Compressive strength of steel fiber high-strength concrete, 05, J Henan Univ Sci Technol: Natural Sci (2008) 54-56 ([in Chinese]).
  33. F.P. Incropera, Fundam Heat Mass Transf, 2006.
  34. M. Vollmer, Newton's law of cooling revisited, Eur. J. Phys. 30 (5) (2009) 1063e1084.
  35. A.F.C.E.N. RCC-CW, Rules for Design and Construction of PWR Nuclear Civil Works, 2015.
  36. M.F. Hessheimer, R. Dameron, Containment Integrity Research at Sandia National Laboratories, Division of Fuel, Engineering & Radiological Research, Office of Nuclear Regulatory Research, US Nuclear Regulatory Commission, 2006.
  37. J.H. Choi, S.J. Choi, T.H. Lee, J.H.J. Kim, Performance evaluations of PSC panels from blast followed by fire loading scenario, Ann. Nucl. Energy 154 (2021), 108109.
  38. ACI Committee 349, Code Requirements for Nuclear Safety-Related Concrete Structures and Commentary (ACI 349-13), an ACI Standard, American Concrete Institute, 2013.
  39. Z. Zhou, C. Wu, S.P. Meng, J. Wu, Mechanical analysis for prestressed concrete containment vessels under loss of coolant accident, Comput. Concr. 14 (2) (2014) 127-143. https://doi.org/10.12989/cac.2014.14.2.127