Acknowledgement
This work was supported by Korea Institute of Energy Technology Evaluation and Planning (KETEP) grant funded by the Korea government (MOTIE) (No. 20193110100020).
References
- G. Saji, Safety for seismic and tsunami risks: lessons learned from the Fukushima Daiichi disaster, Nucl. Eng. Des. 280 (2014) 449-463. https://doi.org/10.1016/j.nucengdes.2014.09.013
- N.R.C. Us, Recommendations for Enhancing Reactor Safety in the 21st Century: the Near Term Task Review of Insights from the Fukushima Dai-Ichi Accident, US Nuclear Regulatory Commission, Washington, 2011.
- W.P. Chen, A.T. Onesto, V. DeVita, Seismic Fragility Test of a 6-inch Diameter Pipe System, NUREG/CR-4859, Washington DC, USA, 1987.
- G. DeGrassi, J. Nie, C. Hofmayer, Seismic Analysis of Large-Scale Piping Systems for the JNES/NUPEC Ultimate Strength Piping Test Program, NUREG/CR-6983, Washington DC, USA, 1987.
- A. Ravikiran, P.N. Dubey, M.K. Agrawal, G.R. Reddy, R.K. Singh, K.K. Vaze, Experimental and numerical studies of ratcheting in a pressurized piping system under seismic load, J. Pressure Vessel Technol. 137 (2015), 031011.
- I. Nakamura, A. Otani, M. Morishita, M. Shiratori, T. Watakabe, T. Shibutani, Seismic qualification of piping systems by detailed inelastic response analysis part 3 - variation in elastic-plastic analysis results on carbon steel pipes from the benchmark analysis and the parametric analysis, Proceedings of ASME PVP (2017) PVP2017-65316.
- J.W. Kim, I.H. Song, H.D. Kweon, J.S. Kim, Y.J. Kim, Evaluation of deformation and failure behaviors of nuclear piping components under beyond design basis seismic loads using a simulated specimen, J. Pressure Vessel Technol. 142 (2020), 051305.
- ASME. Rules for Construction of Nuclear Facility Components, ASME BPVC Section III, New York, 2019.
- S. Vishnuvardhan, G. Raghava, Saravanan M. Gandhi, D.M. Pukazhendhi, S. Goyal, P. Arora, S.K. Gupta, Fatigue ratcheting studies on TP304 LN stainless steel straight pipes, Procedia Eng. 2 (2010) 2209-2218. https://doi.org/10.1016/j.proeng.2010.03.237
- S. Vishnuvardhan, G. Raghava, P. Gandhi, M. Saravanan, D.M. Pukazhendhi, S. Goyal, S.K. Gupta, V. Bhasin, K.K. Vaze, Ratcheting studies on type 304LN stainless steel elbows subjected to combined internal pressure and in-plane bending moment, J. Pressure Vessel Technol. 134 (2012), 041203.
- T. Hassan, M. Rahman, S. Bari, Low-cycle fatigue and ratcheting responses of elbow piping components, J. Pressure Vessel Technol. 137 (2015), 031010.
- A. Otani, I. Nakamura, H. Takada, M. Shiratori, Consideration on seismic design margin of elbow in piping, Proceedings of ASME PVP (2011) PVP2011-57146.
- JSME S NC1-2005 in Japanese.
- G.E. Varelis, S.A. Karamanos, A.M. Gresnigt, Pipe elbows under strong cyclic loading, J. Pressure Vessel Technol. 135 (2013), 011207.
- ASME, Process Piping, vol. 3, ASME standard B31., New York, 2006.
- JSME, Codes for Nuclear Power Generation Facilities - Rules on Design and Construction for Nuclear Power Plant: Alternative Design for Seismic Design of Seismic S Class Steel Piping Based on Elastic-Plastic Response Analysis, NCCC-008, 2019.
- J.S. Kim, H.S. Jang, Precise dynamic finite element elastic-plastic seismic analysis considering welds for nuclear power plants, Nucl. Eng. Technol. 54 (2022) 2550-2563. https://doi.org/10.1016/j.net.2022.01.032
- G.H. Koo, S.W. Ahn, J.K. Hwang, J. Kim, Shaking table tests to validate inelastic seismic analysis method applicable to nuclear metal components, Appl. Sci. 11 (2021) 9264.
- J.S. Kim, J.Y. Kim, An efficient simplified elastic-plastic analysis procedure using engineering formula for strain-based fatigue assessment of nuclear safety class 1 piping system subjected to severe seismic loads, Int. J. Fatig. 151 (2021), 106390.
- ASME, Alternative Rules for Level D Service Limit of Class 1, 2 and 3 Piping System, ASME BPVC Code Case N-900, New York, 2019.
- G.H. Koo, J.S. Kim, Y.J. Kim, Feasibility study on strain-based seismic design criteria for nuclear components, Energies 13 (2020) 4435.
- D.J. Chang, J.M. Lee, H.S. Nam, N.S. Huh, Y.J. Kim, H.D. Kweon, J.S. Kim, Effect of damage evaluation method and cyclic hardening models on strain-based fatigue assessment to a piping system under seismic loads, J. Mech. Sci. Technol. 34 (7) (2020) 2833-2844. https://doi.org/10.1007/s12206-020-0616-3
- ASME, Rules for Construction of Pressure Vessels, ASME BPVC Section VIII, New York, 2019.
- ASTM, Standard Test Methods for Tension Testing of Metallic Materials, E8-15, American Society for Testing and Materials, 2015.
- W. Prager, A new method of analyzing stresses and strains in work hardening plastic solids, J. Appl. Mech. 23 (1956) 493-496. https://doi.org/10.1115/1.4011389
- ASME, Materials, ASME BPVC Section II, New York, 2019.
- ABAQUS, ABAQUS Version 2018, Dassault Systems, 2018.
- S. Bari, T. Hassan, Anatomy of coupled constitutive models for ratcheting simulation, Int. J. Plast. 16 (2000) 381-409. https://doi.org/10.1016/S0749-6419(99)00059-5
- J.R. Rice, D.M. Tracey, On the ductile enlargement of voids in triaxial stress fields, J. Mech. Phys. Solid. 17 (1969) 201-217. https://doi.org/10.1016/0022-5096(69)90033-7
- A.M. Kanvinde, G.G. Deierlein, Cyclic void growth model to assess ductile fracture initiation in structural steels due to ultra-low cycle fatigue, J. Eng. Mech. 133 (6) (2007) 701-712. https://doi.org/10.1061/(ASCE)0733-9399(2007)133:6(701)
- O.K. Chopra, W.J. Shack, Effects of LWR Coolant Environments on the Fatigue Life of Reactor Materials, Final Report. NUREG/CR-6909, Argonne National Laboratory, 2007. ANL-06/08.
- W.D. Callister, D.G. Rethwisch, Fundamentals of Materials Science and Engineering: an Integrated Approach, John Wiley & Sons, 2018.
- N. Kasahara, I. Nakamura, H. Machida, K. Okamoto, Structural analysis approach for risk assessment under BDBE, Proceedings of ASME PVP (2018) PVP2018-84353.
- N. Kasahara, T. Sato, A. Biahoianu, Contribution to safety enhancement for BDBE in structure and material fields, Proceedings of ASME PVP (2018) PVP2018-84353.