과제정보
본 연구는 산업통상자원부의 재원으로 한국산업기술진흥원의 지원을 받아 수행된 연구 결과입니다(과제번호: P0010341). 본 연구는 과학기술정보통신부의 재원으로 한국연구재단의 지원을 받아 수행된 연구 결과입니다(과제번호: NRF-2017R1A5A1015311).
참고문헌
- U. K. Vaidya and K. K. Chawla, "Processing of Fibre Reinforced Thermoplastic Composites", Int. Mater. Rev., vol. 53, no. 4, pp. 185-218, 2008. https://doi.org/10.1179/174328008X325223
- F. Henning, L. Karger, D. Dorr, F. J. Schirmaier, J. Seuffert, and A. Bernath, "Fast processing and continuous simulation of automotive structural composite components," Compos Sci Technol, vol. 171, pp. 261-279, 2019. https://doi.org/10.1016/j.compscitech.2018.12.007
- H. Suemasu, K. Friedrich, and M. Hou, "On deformation of woven fabric- reinforced thermoplastic composites during stamp-forming," Composites Manufacturing, vol. 5, pp. 31-39, 1994. https://doi.org/10.1016/0956-7143(94)90017-5
- J. M. Lee, C. J. Lee, B. M. Kim, and D. C. Ko, "Design of prepreg compression molding for manufacturing of CFRTP B-pillar reinforcement with equivalent mechanical properties to existing steel part," Int J Precis Eng Manuf, vol. 21, pp. 545-556, 2020. https://doi.org/10.1007/s12541-019-00265-z
- B. Vieille, W. Albouy, L. Chevalier, and L. Taleb, "About the influence of stamping on thermoplastic-based composites for aeronautical applications," Composites part B: Engineering, vol. 45, no. 1, pp. 821-834, 2013. https://doi.org/10.1016/j.compositesb.2012.07.047
- H. Suemasu, K. Friedrich, and M. Hou, "On deformation of woven fabric- reinforced thermoplastic composites during stamp-forming," Composites Manufacturing, vol. 5, no. 1 pp. 31-39, 1994. https://doi.org/10.1016/0956-7143(94)90017-5
- D. Trudel-Boucher, B. Fisa, J. Denault, and P. Gagnon, "Experimental investigation of stamp forming of unconsolidated commingled E-glass/polypropylene fabrics," Composites Science and Technology, vol. 66, pp. 555-570, 2006. https://doi.org/10.1016/j.compscitech.2005.05.036
- Boeing, Boeing 787 from the ground up. 2019.
- G. Pandian, M. Pecht, E. Zio, and M. Hodkiewicz, "Data-driven reliability analysis of Boeing 787 Dreamliner", Chinese Journal of Aeronautics, vol. 33, no 7, pp. 1969-1979, 2020. https://doi.org/10.1016/j.cja.2020.02.003
- R. M. Stack and F. Lai, "Developments in Thermoforming Thermoplastic Composites" Thermoforming Quarterly, vol. 32 pp. 48-53, 2013.
- S. Mashau, "An Investigation into the Manufacturing of complex, Three-Dimensional Components using Continuous Fibre Reinforced Thermoplastic Composite", Master thesis, University of Witwatersrand, 2017.
- P. Bean, R A. Lopez-Anido, and S. Vel, 'Integration of Material Characterization, Thermoforming Simulation, and As-Formed Structural Analysis for Thermoplastic Composites', Polymers, vol. 14, no. 9, 1877, 2022.
- P. Han, J. Butterfield, S. Buchanan, R. McCool, Z. Jiang, M. Price, and A. Murphy, "The prediction of process-induced deformation in a thermoplastic composite in support of manufacturing simulation", Journal of Engineering Manufacture, vol. 227, no. 10, pp. 1417-1429, 2013. https://doi.org/10.1177/0954405413488362
- S. P. Haanappel, R. H. W. ten Thije, U. Sachs, B. Rietman, and R. Akkerman. "Formability analyses of uni-directional and textile reinforced thermoplastics," Composites Part A: Applied Science and Manufacturing, vol. 56, pp. 80-92, 2014. https://doi.org/10.1016/j.compositesa.2013.09.009
- Y. J. Jeon, Y. M. Heo, S. H. Yun, and D. E. Kim, "Stamping process design to develop a urea tank cover for excavators based on sheet metal forming analysis", J. Korea Society of Die & Mold Engineering, vol. 14, pp. 49-55, 2020.
- S. M. Samuel, "Thermostamping of Lond-Fiber Thermoplastic Composites: Consideration of Wrinkles, Distortions, and Cost", Master thesis, Concordia University, 2018.
- J. W. Suh, "A Consideration on Composite Material Certification for Small Aircraft Structure", Current Industrial and Technological Trends in Aerospace, vol. 7, pp. 128-140, 2009.
- J. Sjolander, P. Hallander, and M. Akermo, "Forming induced wrinkling of composite laminates: a numerical study on wrinkling mechanisms", Composite Part A Appl Sci Manuf, vol. 78, pp. 234-245, 2016. https://doi.org/10.1016/j.compositesa.2015.08.025
- H. J. Lee, Y. J. Jeon, and H. Cho, "Development of a process to apply uniform pressure to bond CFRP patches to the inner surface of undercut-shaped sheet metal parts", Korean Society of Die & Mold Engineering, vol. 14, no. 4, pp. 65-70, 2020.
- G. Bogucki, W. McCarvill, S. Ward, and J. S. Tomblin, "Guidelines for the Development of Process Specifications, Instructions, and Controls for the Fabrication of Fiber-Reinforced Polymer Composites", FAA Technical Report, DOT/FAA/AR02/110, NTIS, 2003.
- R. A. Brooks, W. Hongyan, D. Zerong, X. Jie, S. Qinghua, H. Liu, J. P. Dear, and N. Li, "A review on stamp forming of continuous fibre-reinforced thermoplastics", International Journal of Lightweight Materials and Manufacture, vol. 5, no. 3, pp. 411-430, 2022. https://doi.org/10.1016/j.ijlmm.2022.05.001
- A. Benkaddour, G. Lebrun, and L. Laberge-Lebel, "Thermostamping of [0/90]n carbon/peek laminates: Influence of support configuration and demolding temperature on part consolidation", Polymer composites, vol. 39, no. 9, pp. 3341-3352, 2018. https://doi.org/10.1002/pc.24354
- S. Haanappel, "Forming of UD Fibre Reinforced Thermoplastics", PhD Thesis, University of Twente, Netherlands, 2013.
- D. Saenz-Castillo, M. I. Martin, S. Calvo, F. Rodriguez-Lence, and A. Guemes, "Effect of processing parameters and void content on mechanical properties and NDI of thermoplastic composites" Composites Part A: Applied Science and Manufacturing, vol. 121, pp. 308-320, 2019. https://doi.org/10.1016/j.compositesa.2019.03.035
- Toray Advanced Composites. Processing guidelines for TC1225 T700/PAEK UD tape. Data sheet. Internal document provided by Toray to DLR, 2019.