DOI QR코드

DOI QR Code

Polyvinyl-alcohol fiber-reinforced concrete with coarse aggregate in beam elements

  • Leonardo M. Massone (University of Chile, Department of Civil Engineering) ;
  • Jaime Reveco (University of Chile, Department of Civil Engineering) ;
  • Alejandro Arenas (University of Chile, Department of Civil Engineering) ;
  • Fabian Rojas (University of Chile, Department of Civil Engineering)
  • Received : 2022.11.30
  • Accepted : 2023.03.23
  • Published : 2023.04.25

Abstract

The use of fibers has been commonly considered in engineered cementitious composites, but their behavior with coarse aggregate in concrete has not been studied significantly, which is needed to meet structural performance objectives for design, such as ductility. This research analyzes the behavior of fiber-reinforced concrete with coarse aggregate with 0.62%, 1.23%, and 2% PVA (Polyvinyl-alcohol) content, varying the maximum aggregate size. Tensile (direct and indirect) and compressive concrete tests were performed. The PVA fiber addition in coarse aggregate concrete increased the ductility in compression, especially for the fiber with a larger aspect ratio, with a minor impact on strength. In addition, the tensile tests showed that the PVA fiber increased the tensile strength of concrete with coarse aggregate and, more significantly, improved the ductility. A selected mixture was used to build short and slender reinforced concrete beams to assess the behavior of structural members. PVA fiber addition in short beams changed the failure mode from shear to flexure, increasing the deflection capacity. On the other hand, the slender beam tests revealed negligible impact with the use of PVA.

Keywords

Acknowledgement

This work was funded by the National Agency for Research and Development (ANID) for the project Fondecyt Regular 2020 N°1200023. The authors would like to also thank the support of Mr. Pedro Soto for his help with the laboratory setup and testing.

References

  1. ACI 318-19, American Concrete Institute (2019), "Building code requirements for structural concrete and commentary", Farmington Hills, Mich.
  2. Aghdasi, P., Heid, A.E. and Chao, S.H. (2016), "Developing ultra-high-performance fiber- reinforced concrete for large-scale structural applications", ACI Mater. J., 113(5), 559-570. https://doi.org/10.14359/51689103.
  3. Alyousif, A., Anil, O., Sahmaran, M., Lachemi, M., Yildirim, G. and Ashour, A.F. (2016), "Comparison of shear behaviour of engineered cementitious composite and normal concrete beams with different shear span lengths", Magazine Concr. Res., 68(5), 217-228. https://doi.org/10.1680/jmacr.14.00336.
  4. Ayub, T., Khan, S.U. and Ayub, A. (2019), "Analytical model for the compressive stress-strain behavior of PVA-FRC", Constr. Build. Mater., 214, 581-593. https://doi.org/10.1016/j.conbuildmat.2019.04.126.
  5. Batran, T.Z., Ismail, M.K., Hassan, A.A.A. (2021), "Flexural behavior of lightweight self-consolidating concrete beams strengthened with engineered cementitious composite", ACI Mater. J., 118(4), 39-50. https://doi.org/10.14359/51732635.
  6. Blaber, J., Adair, B. and Antoniou, A. (2015), "Ncorr: Open-source 2D digital image correlation matlab software", Exp. Mech., 55(6), 1105-1122. https://doi.org/10.1007/s11340-015-0009-1.
  7. Brandt, A.M. (2008), "Fibre reinforced cement-based (FRC) composites after over 40 years of development in building and civil engineering", Compos. Struct., 86(1-3), 3-9. https://doi.org/10.1016/j.compstruct.2008.03.006.
  8. Cao, M., Li. L. and Shen, S. (2019), "Influence of reinforcing index on rheology of fiber-reinforced mortar", ACI Mater. J., 116(6), 95-105. https://doi.org/10.14359/51716816.
  9. Choi, S.J., Yang, K.H., Sim, J.I. and Choi, B.J. (2014), "Direct tensile strength of lightweight concrete with different specimen depths and aggregate sizes", Constr. Build. Mater., 63, 132-141. https://doi.org/10.1016/j.conbuildmat.2014.04.055.
  10. Georgiou, A.V. and Pantazopoulou, S.J. (2019), "Experimental and analytical investigation of the shear behavior of strain hardening cementitious composites", Struct. Eng. Mech., 72(1), 781-792. https://doi.org/10.12989/sem.2019.72.1.781.
  11. Hamoush, S., Abu-Lebdeh, T. and Cummins, T. (2010), "Deflection behavior of concrete beams reinforced with PVA micro-fibers", Constr. Build. Mater., 24(11), 2285-2293. https://doi.org/10.1016/j.conbuildmat.2010.04.027.
  12. Holschemacher, K. and Hoer, S. (2008), "Influence of pva fibers on load carrying capacity of concrete with coarse aggregates", In 7th Int. Rilem Symp. on Fibre Reinforced Concrete: Design and Applications, 219-229.
  13. Horikoshi, T., Ogawa, A., Saito, T., Hoshiro, H., Fischer, G. and Li, V. (2006), "Properties of polyvinyl alcohol fiber as reinforcing materials for cementitious composites", Proceedings of the International RILEM Workshop on High Performance Fiber Reinforced Cementitious Composites in Structural Applications, 145-153.
  14. Hossain, K.M., Lachemi, M., Sammour, M. and Sonebi, M. (2013), "Strength and fracture energy characteristics of self-consolidating concrete incorporating polyvinyl alcohol, steel and hybrid fibres", Construction and Building Materials, 45, 20-29. https://doi.org/10.1016/j.conbuildmat.2013.03.054.
  15. Ismail, M.K., Abdelaleem, B.H. and Hassan, A.A.A. (2018), "Effect of fiber type on the behavior of cementitious composite beam-column joints under reversed cyclic loading", Constr. Build. Mater., 186, 969-977. https://doi.org/10.1016/j.conbuildmat.2018.08.024.
  16. Jabbour, R., Assaad J.J. and Hamad, B. (2021), "Cost-to-performance assessment of polyvinyl alcohol fibers in concrete structures", Mech. Adv. Mater. Struct., 29(20), 2973-2983. https://doi.org/10.1080/15376494.2021.1882625.
  17. Kang, T.H.K., Kim, W., Massone, L.M. and Galleguillos, T.A. (2012), "Shear-flexure coupling behavior of steel fiber-reinforced concrete beams", ACI Struct. J., 109(4), 435-444. https://doi.org/10.14359/51683863.
  18. Karimpour, H. and Mazloom, M. (2022), "Pseudo-strain hardening and mechanical properties of green cementitious composites containing polypropylene fibers", Struct. Eng. Mech., 81(5), 575-589. https://doi.org/10.12989/sem.2022.81.5.575.
  19. Khan, S.U. and Ayub, T. (2016), "Modelling of the pre and post-cracking response of the PVA fibre reinforced concrete subjected to direct tension", Constr. Build. Mater., 120, 540-557. https://doi.org/10.1016/j.conbuildmat.2016.05.130.
  20. Kim, J.H., Robertson, R.E. and Naaman, A.E. (1999), "Structure and properties of poly(vinyl alcohol)-modified mortar and concrete", Cement Concr. Res., 29, 407-415. https://doi.org/10.1016/S0008-8846(98)00246-4.
  21. Li, M. and Li, V.C. (2013), "Rheology, fiber dispersion, and robust properties of engineered cementitious composites", Mater. Struct., 46, 405-420. https://doi.org/10.1617/s11527-012-9909-z.
  22. Li, Z., Li, F., Chang, T.Y.P. and Mai, Y.W. (1998), "Uniaxial tensile behavior of concrete reinforced with randomly distributed short fibers", ACI Mater. J., 95(5), 564-574. https://doi.org/10.14359/399.
  23. Massone L.M. (2013), "Fundamental principles of the reinforced concrete design code changes in Chile following the Mw 8.8 earthquake In 2010", Eng. Struct., 56, 1335-1345. https://doi.org/10.1016/j.engstruct.2013.07.013.
  24. Lopez, C. N., Massone, L. M. and Kolozvari, K. (2022), "Validation of an efficient shear-flexure interaction model for planar reinforced concrete walls", Eng. Struct., 252, 113590. https://doi.org/10.1016/j.engstruct.2021.113590.
  25. Massone L.M. and Alfaro J.I. (2016), "Displacement and curvature estimation for the design of reinforced concrete slender walls", Struct. Des. Tall Spec. Build., 25(16), 823-841. https://doi.org/10.1002/tal.1285.
  26. Massone, L.M. and Nazar, F. (2018), "Analytical and experimental evaluation of the use of fibers as partial reinforcement in shotcrete for tunnels in Chile", Tunnel. Undergr. Sp. Technol., 77, 13-25. https://doi.org/10.1016/j.tust.2018.03.027.
  27. Massone, L.M. and Caceres, I. (2020), "Damage correlation in flexural walls with a displacement approach method for boundary detailing", J. Build. Eng., 32, 101807. https://doi.org/10.1016/j.jobe.2020.101807.
  28. Massone, L.M., Lopez, C.N. and Kolozvari, K. (2021), "Formulation of an efficient shear-flexure interaction model for planar reinforced concrete walls", Eng. Struct., 243, 12680. https://doi.org/10.1016/j.engstruct.2021.112680.
  29. Massone, L.M., Aceituno, D. and Carrillo, J. (2023), "Cumulative damage in RC frame buildings - The 2017 Mexico earthquake case", Adv. Comput. Des., 8(1), 15-38. https://doi.org/10.12989/acd.2023.8.1.015.
  30. Mechtcherine, V., Millon, O., Butler, M. and Thoma, K. (2011), "Mechanical behaviour of strain hardening cement-based composites under impact loading", Cement Concr. Compos., 33(1), 1-11. https://doi.org/10.1016/j.cemconcomp.2010.09.018.
  31. Meng, D., Lee, C.K. and Zhang, Y.X. (2017), "Flexural and shear behaviours of plain and reinforced polyvinyl alcohol-engineered cementitious composite beams", Eng. Struct., 151, 261-272. https://doi.org/10.1016/j.engstruct.2017.08.036.
  32. Orakcal, K., Massone, L.M. and Ulugtekin, D. (2019), "A constitutive model for reinforced concrete panel elements subjected to cyclic loading", Int. J. Concr. Struct. Mater., 13, 51. https://doi.org/10.1186/s40069-019-0365-9.
  33. Rustamov, S., Kim, S., Kwon, M. and Kim, J. (2021), "Effects of fiber types and volume fraction on strength of lightweight concrete containing expanded clay", Adv. Concr. Constr., 12(1), 47-55. https://doi.org/10.12989/acc.2021.12.1.047.
  34. Sahmaran, M., Yucel, H.E., Demirhan, S., Arik, M.T. and Li, V.C. (2012), "Combined effect of aggregate and mineral admixtures on tensile ductility of engineered cementitious composites", ACI Mater. J., 109(6), 627-638. https://doi.org/10.14359/51684160.
  35. Shafiq, N., Ayub, T. and Khan, S.U. (2016), "Investigating the performance of PVA and basalt fibre reinforced beams subjected to flexural action", Compos. Struct., 153, 30-41. https://doi.org/10.1016/j.compstruct.2016.06.008.
  36. Shanour, A.S., Said, M., Arafa, A.I. and Maher, A. (2018), "Flexural performance of concrete beams containing engineered cementitious composites", Constr. Build. Mater., 180, 23-34. https://doi.org/10.1016/j.conbuildmat.2018.05.238.
  37. Swaddiwudhipong, S., Lu, H.R. and Wee, T.H. (2003), "Direct tension test and tensile strain capacity of concrete at early age", Cement Concr. Res., 33(12), 2077-2084. https://doi.org/10.1016/S0008-8846(03)00231-X.
  38. Thong, C.C., Teo, D.C. and Ng, C.K. (2016), "Application of polyvinyl alcohol (PVA) in cement-based composite materials: A review of its engineering properties and microstructure behavior", Constr. Build. Mater., 107, 172-180. https://doi.org/10.1016/j.conbuildmat.2015.12.188.
  39. Wang, Z., Zuo, J., Zhang, X., Jiang, G. and Feng, L. (2020), "Stress-strain behaviour of hybrid-fibre engineered cementitious composite in compression", Adv. Cement Res., 32(2), 53-65. https://doi.org/10.1680/jadcr.18.00072.
  40. Yu, K., Li, L., Yu, J., Wang, Y., Ye, J. and Xu, Q.F. (2018), "Direct tensile properties of engineered cementitious composites: A review", Constr. Build. Mater., 165, 346-362. https://doi.org/10.1016/j.conbuildmat.2017.12.124.
  41. Zhang, H.M. and Chen, Z.Y. (2021), "Comparison and prediction of seismic performance for shear walls composed with fiber reinforced concrete", Adv. Concr. Constr., 11(2), 111-126. https://doi.org/10.12989/acc.2021.11.2.111.