DOI QR코드

DOI QR Code

Repair of sports bone injury based on multifunctional nanomaterial particles

  • Dongbai Guo (Police Skills and Tactics Training Department, Criminal Investigation Police University of China)
  • 투고 : 2023.03.05
  • 심사 : 2023.04.08
  • 발행 : 2023.05.25

초록

Nanoparticles have lower size and larger specific surface area, good stability and less toxic and side effects. In recent years, with the development of nanotechnology, its application range has become wider and wider, especially in the field of biomedicine, which has received more and more attention. Bone defect repair materials with high strength, high elasticity and high tissue affinity can be prepared by nanotechnology. The purpose of this paper was to study how to analyze and study the composite materials for sports bone injury based on multifunctional nanomaterials, and described the electrospinning method. In this paper, nano-sized zirconia (ZrO2) filled micro-sized hydroxyapatite (HAP) composites were prepared according to the mechanical properties of bone substitute materials in the process of human rehabilitation. Through material tensile and compression experiments, the performance parameters of ZrO2/HAP composites with different mass fraction ratios were analyzed, the influence of filling ZrO2 particles on the mechanical properties of HAP matrix materials was clarified, and the effect of ZrO2 mass fraction on the mechanical properties of matrix materials was analyzed. From the analysis of the compressive elastic modulus, when the mass fraction of ZrO2 was 15%, the compressive elastic modulus of the material was 1222 MPa, and when 45% was 1672 MPa. From the analysis of compression ratio stiffness, when the mass fraction of ZrO2 was 15%, the compression ratio stiffness was 658.07 MPa·cm3/g, and when it was 45%, the compression ratio stiffness is 943.51MPa·cm3/g. It can be seen that by increasing the mass fraction of ZrO2, the stiffness of the composite material can be effectively increased, and the ability of the material to resist deformation would be increased. Typically, the more stressed the bone substitute material, the greater the stiffness of the compression ratio. Different mass fractions of ZrO2/HAP filling materials can be selected to meet the mechanical performance requirements of sports bone injury, and it can also provide a reference for the selection of bone substitute materials for different patients.

키워드

참고문헌

  1. Abdolrahim, J. (2012), "Seismic performance of structures with pre-bent strips as a damper", Int. J. Phys. Sci., 7(26), 4061-4072. https://doi.org/10.5897/ijps11.1324.
  2. Adamian, A., Safari, K.H., Sheikholeslami, M., Habibi, M., Al-Furjan, M. and Chen, G. (2020), "Critical temperature and frequency characteristics of GPLs-reinforced composite doubly curved panel", Appl. Sci., 10(9), 3251. https://doi.org/10.3390/app10093251.
  3. Al-Furjan, M., Dehini, R., Khorami, M., Habibi, M. and won Jung, D. (2020a), "On the dynamics of the ultra-fast rotating cantilever orthotropic piezoelectric nanodisk based on nonlocal strain gradient theory", Compos. Struct., 255, 112990. https://doi.org/10.1016/j.compstruct.2020.112990.
  4. Al-Furjan, M., Fereidouni, M., Habibi, M., Abd Ali, R., Ni, J. and Safarpour, M. (2020b), "Influence of in-plane loading on the vibrations of the fully symmetric mechanical systems via dynamic simulation and generalized differential quadrature framework", Eng. Comput., 1-23. https://doi.org/10.1007/s00366-020-01177-7.
  5. Al-Furjan, M., Fereidouni, M., Sedghiyan, D., Habibi, M. and won Jung, D. (2020c), "Three-dimensional frequency response of the CNT-Carbon-Fiber reinforced laminated circular/annular plates under initially stresses", Compos. Struct., 257, 113146. https://doi.org/10.1016/j.compstruct.2020.113146.
  6. Al-Furjan, M., Habibi, M., won Jung, D. and Safarpour, H. (2020d), "Vibrational characteristics of a higher-order laminated composite viscoelastic annular microplate via modified couple stress theory", Compos. Struct., 257, 113152. https://doi.org/10.1016/j.compstruct.2020.113152.
  7. Al-Furjan, M., Moghadam, S.A., Dehini, R., Shan, L., Habibi, M. and Safarpour, H. (2020e), "Vibration control of a smart shell reinforced by graphene nanoplatelets under external load: Semi-numerical and finite element modeling", Thin Wall. Struct., 159, 107242. https://doi.org/10.1016/j.tws.2020.107242.
  8. Al-Furjan, M., Oyarhossein, M.A., Habibi, M., Safarpour, H. and Jung, D.W. (2020f), "Frequency and critical angular velocity characteristics of rotary laminated cantilever microdisk via two-dimensional analysis", Thin Wall. Struct., 157, 107111. https://doi.org/10.1016/j.tws.2020.107111.
  9. Ali, S. (2012), "Investigation of channel shear connectors for composite concrete and steel T-beam", Int. J. Phys. Sci., 7(11), 1828-1831. https://doi.org/10.5897/ijps11.1604.
  10. Alipour, M., Torabi, M.A., Sareban, M., Lashini, H., Sadeghi, E., Fazaeli, A., Habibi, M. and Hashemi, R. (2020), "Finite element and experimental method for analyzing the effects of martensite morphologies on the formability of DP steels", Mech. Bas. Des. Struct. Mach., 48(5), 525-541. https://doi.org/10.1080/15397734.2019.1633343.
  11. Arabnejad Khanouki, M.M., Ramli Sulong, N.H. and Shariati, M. (2010), "Investigation of seismic behaviour of composite structures with concrete filled square steel tubular (CFSST) column by push-over and time-history analyses", Proceedings of the 4th International Conference on Steel & Compos. Struct., 21-23.
  12. Bai, Y., Alzahrani, B., Baharom, S. and Habibi, M. (2020), "Semi-numerical simulation for vibrational responses of the viscoelastic imperfect annular system with honeycomb core under residual pressure", Eng. Comput., 1-26. https://doi.org/10.1007/s00366-020-01191-9.
  13. Barros, J., Ferraz, M.P., Azeredo, J., Fernandes, M., Gomes, P. and Monteiro, F. (2019), "Alginate-nanohydroxyapatite hydrogel system: Optimizing the formulation for enhanced bone regeneration", Mater. Sci. Eng.: C, 105, 109985. https://doi.org/10.1016/j.msec.2019.109985.
  14. Bratsman, A., Wassef, A., Wassef, C.R., Jayaram, P., Mosely, J.B. and Shybut, T.B. (2021), "Epidemiology of NCAA bone stress injuries: A comparison of athletes in divisions I, II, and III", Orthop. J. Sport. Med., 9(7), 23259671211014496. https://doi.org/10.1177/23259671211014496.
  15. Che, H., Che, Y., Lu, Q., Chen, N., Chen, F., Jin, Q. and Ma, N. (2017), "Repair effect of nHA-Mg porous composite materials modified by PLGA on jaw bone defect of rabbits", J. Jilin Univ. (Med. Ed.), (6), 1.
  16. Chen, C., Shi, L., Shariati, M., Toghroli, A., Mohamad, E.T., Bui, D.T. and Khorami, M. (2019), "Behavior of steel storage pallet racking connection-A review", Steel Compos. Struct., 30(5), 457. https://doi.org/10.12989/scs.2019.30.5.457.
  17. Chen, F., Chen, J., Duan, R., Habibi, M. and Khadimallah, M.A. (2022), "Investigation on dynamic stability and aeroelastic characteristics of composite curved pipes with any yawed angle", Compos. Struct., 284, 115195. https://doi.org/10.1016/j.compstruct.2022.115195.
  18. Cheshmeh, E., Karbon, M., Eyvazian, A., Jung, D.W., Habibi, M. and Safarpour, M. (2020), "Buckling and vibration analysis of FG-CNTRC plate subjected to thermo-mechanical load based on higher order shear deformation theory", Mech. Bas. Des. Struct. Mach., 50(4), 1137-1160. https://doi.org/10.1080/15397734.2020.1744005.
  19. Dai, Z., Jiang, Z., Zhang, L. and Habibi, M. (2021a), "Frequency characteristics and sensitivity analysis of a size-dependent laminated nanoshell", Adv. Nano Res., 10(2), 175. https://doi.org/10.12989/anr.2021.10.2.175.
  20. Dai, Z., Wu, S., Habibi, M. and Ali, H.E. (2023), "Application of point interpolation mesh-free method for magneto/electro rheological vibrations of sandwich conical panels", Aerosp. Sci. Technol., 135, 108180. https://doi.org/10.1016/j.ast.2023.108180.
  21. Dai, Z., Zhang, L., Bolandi, S.Y. and Habibi, M. (2021b), "On the vibrations of the non-polynomial viscoelastic composite open-type shell under residual stresses", Compos. Struct., 263, 113599. https://doi.org/10.1016/j.compstruct.2021.113599.
  22. Davoodnabi, S.M., Mirhosseini, S.M. and Shariati, M. (2019), "Behavior of steel-concrete composite beam using angle shear connectors at fire condition", Steel Compos. Struct., 30(2), 141-147. https://doi.org/10.12989/scs.2019.30.2.141.
  23. Dong, Y., Gao, Y., Zhu, Q., Moradi, Z. and Safa, M. (2022), "TEGDQE implementation to investigate the vibration of FG composite conical shells considering a frequency controller solid ring", Eng. Anal. Bound. Elem., 138, 95-107. https://doi.org/10.1016/j.enganabound.2022.01.017.
  24. Ebrahimi, F., Habibi, M. and Safarpour, H. (2019a), "On modeling of wave propagation in a thermally affected GNP-reinforced imperfect nanocomposite shell", Eng. Comput., 35(4), 1375-1389. https://doi.org/10.1007/s00366-018-0669-4
  25. Ebrahimi, F., Hajilak, Z.E., Habibi, M. and Safarpour, H. (2019b), "Buckling and vibration characteristics of a carbon nanotube-reinforced spinning cantilever cylindrical 3D shell conveying viscous fluid flow and carrying spring-mass systems under various temperature distributions", Proc. Inst. Mech. Eng., Part C: J. Mech. Eng. Sci., 233(13), 4590-4605. https://doi.org/10.1177/0954406219832323.
  26. Ebrahimi, F., Hashemabadi, D., Habibi, M. and Safarpour, H. (2020a), "Thermal buckling and forced vibration characteristics of a porous GNP reinforced nanocomposite cylindrical shell", Microsyst. Technol., 26(2), 461-473. https://doi.org/10.1007/s00542-019-04542-9.
  27. Ebrahimi, F., Mohammadi, K., Barouti, M.M. and Habibi, M. (2019c), "Wave propagation analysis of a spinning porous graphene nanoplatelet-reinforced nanoshell", Wave. Random Complex Media, 1-27. https://doi.org/10.1080/17455030.2019.1694729.
  28. Ebrahimi, F., Supeni, E.E.B., Habibi, M. and Safarpour, H. (2020b), "Frequency characteristics of a GPL-reinforced composite microdisk coupled with a piezoelectric layer", Eur. Phys. J. Plus, 135(2), 144. https://doi.org/10.1140/epjp/s13360-020-00217-x.
  29. Esmailpoor Hajilak, Z., Pourghader, J., Hashemabadi, D., Sharifi Bagh, F., Habibi, M. and Safarpour, H. (2019), "Multilayer GPLRC composite cylindrical nanoshell using modified strain gradient theory", Mech. Bas. Des. Struct. Mach., 47(5), 521-545. doi/10.1080/15397734.2019.1566743.
  30. Fan, L., Huang, Y., Ji, D., Moradi, Z., Safa, M. and Amine Khadimallah, M. (2022a), "Interaction of angular velocity and temperature rise in the thermo-inertia bifurcation buckling of FG laminated nanocomposite annular plates", Eng. Struct., 265, 114518. https://doi.org/10.1016/j.engstruct.2022.114518.
  31. Fan, L., Kong, D., Song, J., Moradi, Z., Safa, M. and Khadimallah, M.A. (2022b), "Optimization dynamic responses of laminated multiphase shell in thermo-electro-mechanical conditions", Adv. Nano Res., 13(1), 29-45. https://doi.org/10.12989/anr.2022.13.1.029.
  32. Fang, Z., Zhu, Z., Wu, P. and Moradi, Z. (2023), "Vibration and damping analysis of sandwich electrorheological fluid deep arches with bi-directional FGM containers", Eng. Struct., 276, 115325. https://doi.org/10.1016/j.engstruct.2022.115325.
  33. Fazaeli, A., Habibi, M. and Ekrami, A.a. (2016), "Experimental and finite element comparison of mechanical properties and formability of dual phase steel and ferrite - pearlite steel with the same chemical composition", Metallurg. Eng., 19(2), 84-93. http://doi.org/10.22076/me.2017.41458.1064.
  34. Fu, M., Zhuang, Q., Yu, H. and Chen, W. (2023), "MnCo2S4 nanosheet arrays modified with vermicular polypyrrole for advanced free-standing flexible electrodes", Electrochimica Acta, 447, 142167. https://doi.org/10.1016/j.electacta.2023.142167.
  35. Ghazanfari, A., Soleimani, S.S., Keshavarzzadeh, M., Habibi, M., Assempuor, A. and Hashemi, R. (2020), "Prediction of FLD for sheet metal by considering through-thickness shear stresses", Mech. Bas. Des. Struct. Mach., 48(6), 755-772. https://doi.org/10.1080/15397734.2019.1662310.
  36. Guo, J., Baharvand, A., Tazeddinova, D., Habibi, M., Safarpour, H., Roco-Videla, A. and Selmi, A. (2021a), "An intelligent computer method for vibration responses of the spinning multilayer symmetric nanosystem using multi-physics modeling", Eng. Comput., 38(Suppl 5), 4217-4238. https://doi.org/10.1007/s00366-021-01433-4
  37. Guo, Y., Mi, H. and Habibi, M. (2021b), "Electromechanical energy absorption, resonance frequency, and low-velocity impact analysis of the piezoelectric doubly curved system", Mech. Syst. Signal Pr., 157, 107723. https://doi.org/10.1016/j.ymssp.2021.107723.
  38. Habibi, M., Darabi, R., Sa, J.C.D. and Reis, A. (2021), "An innovation in finite element simulation via crystal plasticity assessment of grain morphology effect on sheet metal formability", Proc. Inst. Mech. Eng., Part L: J. Mater.: Des. Appl., 235(8), 1937-1951. https://doi.org/10.1177/14644207211024686.
  39. Habibi, M., Ghazanfari, A., Assempour, A., Naghdabadi, R. and Hashemi, R. (2017), "Determination of forming limit diagram using two modified finite element models", Mech Eng., 48(4), 141-144. https://doi.org/10.22060/MEJ.2016.664.
  40. Habibi, M., Hashemabadi, D. and Safarpour, H. (2019a), "Vibration analysis of a high-speed rotating GPLRC nanostructure coupled with a piezoelectric actuator", Eur. Phys. J. Plus, 134(6), 307. https://doi.org/10.1140/epjp/i2019-12742-7.
  41. Habibi, M., Hashemi, R., Ghazanfari, A., Naghdabadi, R. and Assempour, A. (2018a), "Forming limit diagrams by including the M-K model in finite element simulation considering the effect of bending", Proc. Inst. Mech. Eng., Part L: J. Mater.: Des. Appl., 232(8), 625-636. https://doi.org/10.1177/1464420716642258.
  42. Habibi, M., Hashemi, R., Sadeghi, E., Fazaeli, A., Ghazanfari, A. and Lashini, H. (2016), "Enhancing the mechanical properties and formability of low carbon steel with dual-phase microstructures", J. Mater. Eng. Perform., 25(2), 382-389. https://doi.org/10.1007/s11665-016-1882-1.
  43. Habibi, M., Hashemi, R., Tafti, M.F. and Assempour, A. (2018b), "Experimental investigation of mechanical properties, formability and forming limit diagrams for tailor-welded blanks produced by friction stir welding", J. Manuf. Pr., 31, 310-323. https://doi.org/10.1016/j.jmapro.2017.11.009.
  44. Habibi, M., Mohammadgholiha, M. and Safarpour, H. (2019b), "Wave propagation characteristics of the electrically GNP-reinforced nanocomposite cylindrical shell", J. Brazil. Soc. Mech. Sci. Eng., 41(5), 221. https://doi.org/10.1007/s40430-019-1715-x.
  45. Habibi, M., Mohammadi, A., Safarpour, H. and Ghadiri, M. (2019c), "Effect of porosity on buckling and vibrational characteristics of the imperfect GPLRC composite nanoshell", Mech. Bas. Des. Struct. Mach., 49(6), 811-840. https://doi.org/10.1080/15397734.2019.1701490.
  46. Habibi, M., Mohammadi, A., Safarpour, H., Shavalipour, A. and Ghadiri, M. (2019d), "Wave propagation analysis of the laminated cylindrical nanoshell coupled with a piezoelectric actuator", Mech. Bas. Des. Struct. Mach., 49(5), 640-658. https://doi.org/10.1080/15397734.2019.1697932.
  47. Habibi, M., Safarpour, M. and Safarpour, H. (2020), "Vibrational characteristics of a FG-GPLRC viscoelastic thick annular plate using fourth-order Runge-Kutta and GDQ methods", Mech. Bas. Des. Struct. Mach., 50(7), 2471-2492. https://doi.org/10.1080/15397734.2020.1779086.
  48. Habibi, M., Taghdir, A. and Safarpour, H. (2019e), "Stability analysis of an electrically cylindrical nanoshell reinforced with graphene nanoplatelets", Compos. Part B: Eng., 175, 107125. https://doi.org/10.1016/j.compositesb.2019.107125.
  49. Hamidian, M., Shariati, M., Arabnejad, M. and Sinaei, H. (2011), "Assessment of high strength and light weight aggregate concrete properties using ultrasonic pulse velocity technique", Int. J. Phys. Sci., 6(22), 5261-5266. https://doi.org/10.5897/IJPS11.1081.
  50. Hashemi, H.R., Alizadeh, A.a., Oyarhossein, M.A., Shavalipour, A., Makkiabadi, M. and Habibi, M. (2019), "Influence of imperfection on amplitude and resonance frequency of a reinforcement compositionally graded nanostructure", Wave. Random Complex Media, 31(6), 1340-1366. https://doi.org/10.1080/17455030.2019.1662968.
  51. He, X., Ding, J., Habibi, M., Safarpour, H. and Safarpour, M. (2021), "Non-polynomial framework for bending responses of the multi-scale hybrid laminated nanocomposite reinforced circular/annular plate", Thin Wall. Struct., 166, 108019. https://doi.org/10.1016/j.tws.2021.108019.
  52. Hosseini, S.A. and Toghroli, A. (2021), "Effect of mixing Nano-silica and Perlite with pervious concrete for nitrate removal from the contaminated water", Adv. Concrete Constr., 11(6), 531-544. https://doi.org/10.12989/acc.2021.11.6.531.
  53. Hosseinpour, E., Baharom, S., Badaruzzaman, W.H.W., Shariati, M. and Jalali, A. (2018), "Direct shear behavior of concrete filled hollow steel tube shear connector for slim-floor steel beams", Steel Compos. Struct., 26(4), 485-499. https://doi.org/10.12989/scs.2018.26.4.485.
  54. Hou, F., Wu, S., Moradi, Z. and Shafiei, N. (2021), "The computational modeling for the static analysis of axially functionally graded micro-cylindrical imperfect beam applying the computer simulation", Eng. Comput., 38(Suppl 4), 3217-3235. https://doi.org/10.1007/s00366-021-01456-x.
  55. Hu, P., Moradi, Z., Ali, H.E. and Foong, L.K. (2022), "Metaheuristic-reinforced neural network for predicting the compressive strength of concrete", Smart Struct. Syst., 30(2), 195-207. https://doi.org/10.12989/sss.2022.30.2.195.
  56. Huang, L., Zhang, J., Hu, J., Zhao, T. and Gu, Z. (2020), "Biomimetic gelatin methacrylate/nano fish bone hybrid hydrogel for bone regeneration via osteoimmunomodulation", ACS Biomater. Sci. Eng., 6(6), 3270-3274. https://doi.org/10.1021/acsbiomaterials.0c00443.
  57. Huang, X., Hao, H., Oslub, K., Habibi, M. and Tounsi, A. (2021a), "Dynamic stability/instability simulation of the rotary size-dependent functionally graded microsystem", Eng. Comput., 38(Suppl 5), 4163-4179. https://doi.org/10.1007/s00366-021-01399-3.
  58. Huang, X., Zhang, Y., Moradi, Z. and Shafiei, N. (2022), "Computer simulation via a couple of homotopy perturbation methods and the generalized differential quadrature method for nonlinear vibration of functionally graded non-uniform microtube", Eng. Comput., 38(Suppl 3), 2481-2498. https://doi.org/10.1007/s00366-021-01395-7.
  59. Huang, X., Zhu, Y., Vafaei, P., Moradi, Z. and Davoudi, M. (2021b), "An iterative simulation algorithm for large oscillation of the applicable 2D-electrical system on a complex nonlinear substrate", Eng. Comput., 1-13. https://doi.org/10.1007/s00366-021-01320-y.
  60. Ismail, M., Shariati, M., Awal, A.S.M.A., Chiong, C.E., Chahnasir, E.S., Porbar, A., Heydari, A. and Khorami, M. (2018), "Strengthening of bolted shear joints in industrialized ferrocement construction", Steel Compos. Struct., 28(6), 681-690. https://doi.org/10.12989/scs.2018.28.6.681.
  61. Jiao, J., Ghoreishi, S.M., Moradi, Z. and Oslub, K. (2021), "Coupled particle swarm optimization method with genetic algorithm for the static-dynamic performance of the magneto-electro-elastic nanosystem", Eng. Comput., 1-15. https://doi.org/10.1007/s00366-021-01391-x.
  62. Jin, X., Moradi, Z. and Rashidi, R. (2023), "Optimal operation of distributed generations in four-wire unbalanced distribution systems considering different models of loads", Int. Trans. Elec. Energy Syst., 2023, Article ID 8763116. https://doi.org/10.1155/2023/8763116.
  63. Khanouki, M.M.A., Ramli Sulong, N.H., Shariati, M. and Tahir, M.M. (2016), "Investigation of through beam connection to concrete filled circular steel tube (CFCST) column", J. Constr. Steel Res., 121, 144-162. https://doi.org/10.1016/j.jcsr.2016.01.002.
  64. Khorami, M., Khorami, M., Alvansazyazdi, M., Shariati, M., Zandi, Y., Jalali, A. and Tahir, M.M. (2017a), "Seismic performance evaluation of buckling restrained braced frames (BRBF) using incremental nonlinear dynamic analysis method (IDA)", Earthq. Struct., 13(6), 531-538. https://doi.org/10.12989/eas.2017.13.6.531.
  65. Khorami, M., Khorami, M., Motahar, H., Alvansazyazdi, M., Shariati, M., Jalali, A. and Tahir, M.M. (2017b), "Evaluation of the seismic performance of special moment frames using incremental nonlinear dynamic analysis", Struct. Eng. Mech., 63(2), 259-268. https://doi.org/10.12989/sem.2017.63.2.259.
  66. Khorramian, K., Maleki, S., Shariati, M. and Ramli Sulong, N.H. (2015), "Behavior of Tilted angle shear connectors", PLoS One, 10(12), e0144288. https://doi.org/10.1371/journal.pone.0144288.
  67. Kong, F., Dong, F., Duan, M., Habibi, M., Safarpour, H. and Tounsi, A. (2022), "On the vibrations of the Electrorheological sandwich disk with composite face sheets considering pre and post-yield regions", Thin Wall. Struct., 179, 109631. https://doi.org/10.1016/j.tws.2022.109631.
  68. Lan, J.S., Liu, L., Zeng, R.F., Qin, Y.H., Hou, J.W., Xie, S.S., Yue, S., Yang, J., Ho, R.J. and Ding, Y. (2021), "Tumor-specific carrier-free nanodrugs with GSH depletion and enhanced ROS generation for endogenous synergistic antitumor by a chemotherapy-photodynamic therapy", Chem. Eng. J., 407, 127212. https://doi.org/10.1016/j.cej.2020.127212.
  69. Li, D.Y., Toghroli, A., Shariati, M., Sajedi, F., Bui, D.T., Kianmehr, P., Mohamad, E.T. and Khorami, M. (2019), "Application of polymer, silica-fume and crushed rubber in the production of Pervious concrete", Smart Struct. Syst., 23(2), 207-214. https://doi.org/10.12989/sss.2019.23.2.207.
  70. Li, J., Tang, F. and Habibi, M. (2020a), "Bi-directional thermal buckling and resonance frequency characteristics of a GNP-reinforced composite nanostructure", Eng. Comput., 1-22. https://doi.org/10.1007/s00366-020-01110-y.
  71. Li, N., Xu, P., Chen, Z., Chen, M., He, H. and Zhang, W. (2020b), "In vivo study on the repairment of distal femur defects in rabbit with nano-pearl powder bone substitute", J. Central South Univ., Med. Sci., 45(6), 684-692. https://doi.org/10.11817/j.issn.1672-7347.2020.180676.
  72. Li, Y., Li, S., Guo, K., Fang, X. and Habibi, M. (2020c), "On the modeling of bending responses of graphene-reinforced higher order annular plate via two-dimensional continuum mechanics approach", Eng. Comput., 38(Suppl 1), 703-724. https://doi.org/10.1007/s00366-020-01166-w.
  73. Li, Y., Xia, X., Hou, W., Lv, H., Liu, J. and Li, X. (2023), "How effective are metal nanotherapeutic platforms against bacterial infections? A comprehensive review of literature", Int. J. Nanomed., 1109-1128. https://doi.org/10.2147/IJN.S397298.
  74. Liao, J., Shi, K., Jia, Y., Wu, Y. and Qian, Z. (2021), "Gold nanorods and nanohydroxyapatite hybrid hydrogel for preventing bone tumor recurrence via postoperative photothermal therapy and bone regeneration promotion", Bioact. Mater., 6(8), 2221-2230. https://doi.org/10.1016/j.bioactmat.2021.01.006.
  75. Liu, H., Shen, S., Oslub, K., Habibi, M. and Safarpour, H. (2021a), "Amplitude motion and frequency simulation of a composite viscoelastic microsystem within modified couple stress elasticity", Eng. Comput., 1-15. https://doi.org/10.1007/s00366-021-01316-8.
  76. Liu, H., Zhao, Y., Pishbin, M., Habibi, M., Bashir, M. and Issakhov, A. (2021b), "A comprehensive mathematical simulation of the composite size-dependent rotary 3D microsystem via two-dimensional generalized differential quadrature method", Eng. Comput., 38(Suppl 5), 4181-4196. https://doi.org/10.1007/s00366-021-01419-2.
  77. Liu, Y., Wang, W., He, T., Moradi, Z. and Larco Benitez, M.A. (2021c), "On the modelling of the vibration behaviors via discrete singular convolution method for a high-order sector annular system", Eng. Comput., 38(Suppl 4), 3631-3653. https://doi.org/10.1007/s00366-021-01454-z
  78. Liu, Z., Su, S., Xi, D. and Habibi, M. (2020a), "Vibrational responses of a MHC viscoelastic thick annular plate in thermal environment using GDQ method", Mech. Bas. Des. Struct. Mach., 50(8), 2688-2713. https://doi.org/10.1080/15397734.2020.1784201.
  79. Liu, Z., Wu, X., Yu, M. and Habibi, M. (2020b), "Large-amplitude dynamical behavior of multilayer graphene platelets reinforced nanocomposite annular plate under thermomechanical loadings", Mech. Bas. Des. Struct. Mach., 50(11), 3722-3746. https://doi.org/10.1080/15397734.2020.1815544.
  80. Lori, E.S., Ebrahimi, F., Supeni, E.E.B., Habibi, M. and Safarpour, H. (2020), "The critical voltage of a GPL-reinforced composite microdisk covered with piezoelectric layer", Eng. Comput., 37(4), 3489-3508. https://doi.org/10.1007/s00366-020-01004-z.
  81. Lu, J., Fan, X., Hu, J., Li, J., Rong, J., Wang, W., Chen, Y., Liu, W., Chen, J. and Chen, Y. (2023), "Construction and function of robust and moist bilayer chitosan-based hydrogel wound dressing", Mater. Des., 111604. https://doi.org/10.1016/j.matdes.2023.111604.
  82. Luo, J., Song, J., Moradi, Z., Safa, M. and Khadimallah, M.A. (2022a), "Effect of simultaneous compressive and inertia loads on the bifurcation stability of shear deformable functionally graded annular fabrications reinforced with graphenes", Eur. J. Mech.-A/Solid., 94, 104581. https://doi.org/10.1016/j.euromechsol.2022.104581.
  83. Luo, J., Wu, S., Hou, S., Moradi, Z., Habibi, M. and Khadimallah, M.A. (2022b), "Thermally nonlinear thermoselasticity of a one-dimensional finite domain based on the finite strain concept", Eur. J. Mech.-A/Solid., 96, 104726. https://doi.org/10.1016/j.euromechsol.2022.104726.
  84. Ma, L., Liu, X. and Moradi, Z. (2021), "On the chaotic behavior of graphene-reinforced annular systems under harmonic excitation", Eng. Comput., 1-25. https://doi.org/10.1007/s00366-020-01210-9.
  85. Mehrabi, P., Shariati, M., Kabirifar, K., Jarrah, M., Rasekh, H., Trung, N.T., Shariati, A. and Jahandari, S. (2021), "Effect of pumice powder and nano-clay on the strength and permeability of fiber-reinforced pervious concrete incorporating recycled concrete aggregate", Constr. Build. Mater., 287, 122652. https://doi.org/10.1016/j.conbuildmat.2021.122652.
  86. Michael, M., Meyyazhagan, A., Velayudhannair, K., Pappuswamy, M., Maria, A., Xavier, V., Balasubramanian, B., Baskaran, R., Kamyab, H. and Vasseghian, Y. (2022), "The content of heavy metals in cigarettes and the impact of their leachates on the aquatic ecosystem", Sustain., 14(8), 4752. https://doi.org/10.3390/su14084752.
  87. Miller, R.P., Robins, R.J. and Dieckman, S.D. (2018), "Differential diagnosis of complicated bone stress injury in a female collegiate swimmer", J. Orthop. Sport. Phys. Therapy, 48(10), 823-823. https://doi.org/10.2519/jospt.2018.7731
  88. Miszuk, J.M., Hu, J. and Sun, H. (2020), "Biomimetic nanofibrous 3D materials for craniofacial bone tissue engineering", ACS Appl. Bio Mater., 3(10), 6538-6545. https://doi.org/10.1021/acsabm.0c00946.
  89. Moayedi, H., Aliakbarlou, H., Jebeli, M., Noormohammadiarani, O., Habibi, M., Safarpour, H. and Foong, L. (2020a), "Thermal buckling responses of a graphene reinforced composite micropanel structure", Int. J. Appl. Mech., 12(01), 2050010. https://doi.org/10.1142/S1758825120500106. 
  90. Moayedi, H., Ebrahimi, F., Habibi, M., Safarpour, H. and Foong, L.K. (2020b), "Application of nonlocal strain-stress gradient theory and GDQEM for thermo-vibration responses of a laminated composite nanoshell", Eng. Comput., 37, 3359-3374. https://doi.org/10.1007/s00366-020-01002-1.
  91. Moayedi, H., Habibi, M., Safarpour, H., Safarpour, M. and Foong, L. (2019), "Buckling and frequency responses of a graphene nanoplatelet reinforced composite microdisk", Int. J. Appl. Mech., 11(10), 1950102. https://doi.org/10.1142/S1758825119501023
  92. Mohammadgholiha, M., Shokrgozar, A., Habibi, M. and Safarpour, H. (2019), "Buckling and frequency analysis of the nonlocal strain-stress gradient shell reinforced with graphene nanoplatelets", J. Vib. Control, 25(19-20), 2627-2640. https://doi.org/10.1177/1077546319863251.
  93. Mohammadi, A., Lashini, H., Habibi, M. and Safarpour, H. (2019), "Influence of viscoelastic foundation on dynamic behaviour of the double walled cylindrical inhomogeneous micro shell using MCST and with the aid of GDQM", J. Solid Mech., 11(2), 440-453. https://doi.org/10.22034/jsm.2019.665264.
  94. Moradi, Z., Davoudi, M., Ebrahimi, F. and Ehyaei, A.F. (2021), "Intelligent wave dispersion control of an inhomogeneous micro-shell using a proportional-derivative smart controller", Wave. Random Complex Media, 1-24. https://doi.org/10.1080/17455030.2021.1926572.
  95. Moradi, Z., Ebrahimi, F. and Davoudi, M. (2022), "Coupled Newmark beta technique and GDQ method for energy harvesting and vibration control of the piezoelectric MEMS/NEMS subjected to a blast load", Eng. Anal. Bound. Elem., 144, 492-506. https://doi.org/10.1016/j.enganabound.2022.08.021.
  96. Naghipour, M., Niak, K.M., Shariati, M. and Toghroli, A. (2020a), "Effect of progressive shear punch of a foundation on a reinforced concrete building behavior", Steel Compos. Struct., 35(2), 279-294. https://doi.org/10.12989/scs.2020.35.2.279.
  97. Naghipour, M., Yousofizinsaz, G. and Shariati, M. (2020b), "Experimental study on axial compressive behavior of welded built-up CFT stub columns made by cold-formed sections with different welding lines", Steel Compos. Struct., 34(3), 347-359. https://doi.org/10.12989/scs.2020.34.3.347.
  98. Najaafi, N., Jamali, M., Habibi, M., Sadeghi, S., Jung, D.W. and Nabipour, N. (2020), "Dynamic instability responses of the substructure living biological cells in the cytoplasm environment using stress-strain size-dependent theory", J. Biomolec. Struct. Dyn., 39(7), 2543-2554. https://doi.org/10.1080/07391102.2020.1751297.
  99. Nasrollahi, S., Maleki, S., Shariati, M., Marto, A. and Khorami, M. (2018), "Investigation of pipe shear connectors using push out test", Steel Compos. Struct., 27(5), 537-543. https://doi.org/10.12989/scs.2018.27.5.537.
  100. Nouri, K., Sulong, N.H.R., Ibrahim, Z. and Shariati, M. (2021), "Behaviour of novel stiffened angle shear connectors at ambient and elevated temperatures", Adv. Steel Constr., 17(1), 28-38. https://doi.org/10.18057/Ijasc.2021.17.1.4.
  101. Oyarhossein, M.A., Alizadeh, A.A., Habibi, M., Makkiabadi, M., Daman, M., Safarpour, H. and Jung, D.W. (2020), "Dynamic response of the nonlocal strain-stress gradient in laminated polymer composites microtubes", Scientif. Report., 10(1), 1-19. https://doi.org/10.1038/s41598-020-61855-w.
  102. Paknahad, M., Shariati, M., Sedghi, Y., Bazzaz, M. and Khorami, M. (2018), "Shear capacity equation for channel shear connectors in steel-concrete composite beams", Steel Compos. Struct., 28(4), 483-494. https://doi.org/10.12989/scs.2018.28.4.483.
  103. Peng, S., Habibi, M. and Pourjabari, A. (2023), "Generalized differential quadrature element solution, swarm, and GA optimization technique to obtain the optimum frequency of the laminated rotary nanostructure", Eng. Anal. Bound. Elem., 151, 101-114. https://doi.org/10.1016/j.enganabound.2023.02.052.
  104. Pourjabari, A., Hajilak, Z.E., Mohammadi, A., Habibi, M. and Safarpour, H. (2019), "Effect of porosity on free and forced vibration characteristics of the GPL reinforcement composite nanostructures", Comput. Math. Appl., 77(10), 2608-2626. https://doi.org/10.1016/j.camwa.2018.12.041.
  105. Rajan, R.K., Chandran, S., Sreelatha, H.V., John, A. and Parameswaran, R. (2020), "Pamidronate-encapsulated electrospun polycaprolactone-based composite scaffolds for osteoporotic bone defect repair", ACS Appl. Bio Mater., 3(4), 1924-1933. https://doi.org/10.1021/acsabm.9b01077.
  106. Razavian, L., Naghipour, M., Shariati, M. and Safa, M. (2020), "Experimental study of the behavior of composite timber columns confined with hollow rectangular steel sections under compression", Struct. Eng. Mech., 74(1), 145-156. https://doi.org/10.12989/sem.2020.74.1.145.
  107. Sabzevari, F., Amelirad, O., Moradi, Z. and Habibi, M. (2023), "Artificial intelligence evaluation of COVID-19 restrictions and speech therapy effects on the autistic children's behavior", Scientif. Report., 13(1), 4312. https://doi.org/10.1038/s41598-022-25902-y.
  108. Safarpour, H., Ghanizadeh, S.A. and Habibi, M. (2018), "Wave propagation characteristics of a cylindrical laminated composite nanoshell in thermal environment based on the nonlocal strain gradient theory", Eur. Phys. J. Plus, 133(12), 532. https://doi.org/10.1140/epjp/i2018-12385-2.
  109. Safarpour, H., Hajilak, Z.E. and Habibi, M. (2019a), "A size-dependent exact theory for thermal buckling, free and forced vibration analysis of temperature dependent FG multilayer GPLRC composite nanostructures restring on elastic foundation", Int. J. Mech. Mater. Des., 15(3), 569-583. https://doi.org/10.1007/s10999-018-9431-8.
  110. Safarpour, H., Pourghader, J. and Habibi, M. (2019b), "Influence of spring-mass systems on frequency behavior and critical voltage of a high-speed rotating cantilever cylindrical three-dimensional shell coupled with piezoelectric actuator", J. Vib. Control, 25(9), 1543-1557. https://doi.org/10.1177/1077546319828465.
  111. Safarpour, M., Ebrahimi, F., Habibi, M. and Safarpour, H. (2020), "On the nonlinear dynamics of a multi-scale hybrid nanocomposite disk", Eng. Comput., 37(3), 2369-2388. https://doi.org/10.1007/s00366-020-00949-5.
  112. Shah, S.N.R., Sulong, N.H.R., Jumaat, M.Z. and Shariati, M. (2016a), "State-of-the-art review on the design and performance of steel pallet rack connections", Eng. Fail. Anal., 66, 240-258. https://doi.org/10.1016/j.engfailanal.2016.04.017.
  113. Shah, S.N.R., Sulong, N.H.R., Khan, R., Jumaat, M.Z. and Shariati, M. (2016b), "Behavior of industrial steel rack connections", Mech. Syst. Signal Pr., 70-71, 725-740. https://doi.org/10.1016/j.ymssp.2015.08.026.
  114. Shah, S.N.R., Sulong, N.H.R., Shariati, M. and Jumaat, M.Z. (2015), "Steel rack connections: Identification of most influential factors and a comparison of stiffness design methods", Plos One. 10(10), e0139422. https://doi.org/10.1371/journal.pone.0139422.
  115. Shah, S.N.R., Sulong, N.H.R., Shariati, M., Khan, R. and Jumaat, M.Z. (2016c), "Behavior of steel pallet rack beam-to-column connections at elevated temperatures", Thin Wall. Struct., 106, 471-483. https://doi.org/10.1016/j.tws.2016.05.021.
  116. Shahabi, S.E.M., Sulong, N.H.R., Shariati, M. and Shah, S.N.R. (2016), "Performance of shear connectors at elevated temperatures-A review", Steel Compos. Struct., 20(1), 185-203. https://doi.org/10.12989/scs.2016.20.1.185.
  117. Shao, Y., Zhao, Y., Gao, J. and Habibi, M. (2021), "Energy absorption of the strengthened viscoelastic multi-curved composite panel under friction force", Arch. Civil Mech. Eng., 21(4), 1-29. https://doi.org/10.1007/s43452-021-00279-3
  118. Shariati, A., Habibi, M., Tounsi, A., Safarpour, H. and Safa, M. (2020a), "Application of exact continuum size-dependent theory for stability and frequency analysis of a curved cantilevered microtubule by considering viscoelastic properties", Eng. Comput., 37, 3629-3648. https://doi.org/10.1007/s00366-020-01024-9.
  119. Shariati, A., Mohammad-Sedighi, H., Zur, K.K., Habibi, M. and Safa, M. (2020b), "On the vibrations and stability of moving viscoelastic axially functionally graded nanobeams", Mater., 13(7), 1707. https://doi.org/10.3390/ma13071707.
  120. Shariati, A., Mohammad-Sedighi, H., Zur, K.K., Habibi, M. and Safa, M. (2020c), "Stability and dynamics of viscoelastic moving rayleigh beams with an asymmetrical distribution of material parameters", Symmetry, 12(4), 586. https://doi.org/10.3390/sym12040586.
  121. Shariati, A., Ramli Sulong, N.H., Suhatril, M. and Shariati, M. (2012a), "Various types of shear connectors in composite structures: A review", Int. J. Phys. Sci., 7(22), 2876-2890. https://doi.org/10.5897/IJPSx11.004.
  122. Shariati, A., Shariati, M., Sulong, N.H.R., Suhatril, M., Khanouki, M.M.A. and Mahoutian, M. (2014a), "Experimental assessment of angle shear connectors under monotonic and fully reversed cyclic loading in high strength concrete", Constr. Build. Mater., 52, 276-283. https://doi.org/10.1016/j.conbuildmat.2013.11.036.
  123. Shariati, M. (2008), "Assessment building using none-destructive test techniques (ultra Sonic Pulse Velocity and Schmidt Rebound Hammer)", Universiti Putra Malaysia.
  124. Shariati, M. (2013), "Behaviour of C-shaped shear connectors in stell concrete composite beams", Jabatan Kejuruteraan Awam, Fakulti Kejuruteraan, Universiti Malaya.
  125. Shariati, M., Ghorbani, M., Naghipour, M., Alinejad, N. and Toghroli, A. (2020d), "The effect of RBS connection on energy absorption in tall buildings with braced tube frame system", Steel Compos. Struct., 34(3), 393. https://doi.org/10.12989/scs.2020.34.3.393.
  126. Shariati, M., Grayeli, M., Shariati, A. and Naghipour, M. (2020e), "Performance of composite frame consisting of steel beams and concrete filled tubes under fire loading", Steel Compos. Struct., 36(5), 587-602. https://doi.org/10.12989/scs.2020.36.5.587.
  127. Shariati, M., Heyrati, A., Zandi, Y., Laka, H., Toghroli, A., Kianmehr, P., Safa, M., Salih, M.N.A. and Poi-Ngian, S. (2019), "Application of waste tire rubber aggregate in porous concrete", Smart Struct. Syst., 24(4), 553-566. https://doi.org/10.12989/sss.2019.24.4.553.
  128. Shariati, M., Lagzian, M., Maleki, S., Shariati, A. and Trung, N.T. (2020f), "Evaluation of seismic performance factors for tension-only braced frames", Steel Compos. Struct., 35(4), 599-609. https://doi.org/10.12989/scs.2020.35.4.599.
  129. Shariati, M., Ramli Sulong, N.H. and Arabnejad Khanouki, M.M. (2010), "Experimental and analytical study on channel shear connectors in light weight aggregate concrete", Proceedings of the 4th International Conference on Steel & Composite Structures, Sydney, Australia, July.
  130. Shariati, M., Ramli Sulong, N.H., Arabnejad Khanouki, M.M. and Mahoutian, M. (2011a), "Shear resistance of channel shear connectors in plain, reinforced and lightweight concrete", Scientif. Res. Essay., 6(4), 977-983.
  131. Shariati, M., Ramli Sulong, N.H., Shariati, A. and Khanouki, M.A. (2015), "Behavior of V-shaped angle shear connectors: Experimental and parametric study", Mater. Struct., 49(9), 3909-3926. https://doi.org/10.1617/s11527-015-0762-8.
  132. Shariati, M., Ramli Sulong, N.H., Sinaei, H., Arabnejad Khanouki, M.M. and Shafigh, P. (2011b), "Behavior of channel shear connectors in normal and light weight aggregate concrete (Experimental and analytical study)", Adv. Mater. Res., 168, 2303-2307. https://doi.org/10.4028/www.scientific.net/AMR.168-170.2303.
  133. Shariati, M., Ramli Sulong, N.H., Suhatril, M., Shariati, A., Arabnejad Khanouki, M.M. and Sinaei, H. (2012b), "Fatigue energy dissipation and failure analysis of channel shear connector embedded in the lightweight aggregate concrete in composite bridge girders", Fifth International Conference on Engineering Failure Analysis, The Hague, The Netherlands, July.
  134. Shariati, M., Shariati, A., Sulong, N.H.R., Suhatril, M. and Khanouki, M.M.A. (2014b), "Fatigue energy dissipation and failure analysis of angle shear connectors embedded in high strength concrete", Eng. Fail. Anal., 41, 124-134. https://doi.org/10.1016/j.engfailanal.2014.02.017.
  135. Shariati, M., Sulong, N.H.R. and Khanouki, M.M.A. (2012c), "Experimental assessment of channel shear connectors under monotonic and fully reversed cyclic loading in high strength concrete", Mater. Des., 34, 325-331. https://doi.org/10.1016/j.matdes.2011.08.008.
  136. Shariati, M., Sulong, N.H.R., Shariati, A. and Kueh, A.B.H. (2016), "Comparative performance of channel and angle shear connectors in high strength concrete composites: An experimental study", Constr. Build. Mater., 120, 382-392. https://doi.org/10.1016/j.conbuildmat.2016.05.102.
  137. Shariati, M., Sulong, N.H.R., Suhatril, M., Shariati, A., Khanouki, M.M.A. and Sinaei, H. (2012d), "Behaviour of C-shaped angle shear connectors under monotonic and fully reversed cyclic loading: An experimental study", Mater. Des., 41, 67-73. https://doi.org/10.1016/j.matdes.2012.04.039.
  138. Shariati, M., Sulong, N.H.R., Suhatril, M., Shariati, A., Khanouki, M.M.A. and Sinaei, H. (2013), "Comparison of behaviour between channel and angle shear connectors under monotonic and fully reversed cyclic loading", Constr. Build. Mater., 38, 582-593. https://doi.org/10.1016/j.conbuildmat.2012.07.050.
  139. Shariati, M., Tahir, M.M., Wee, T.C., Shah, S.N.R., Jalali, A., Abdullahi, M.M. and Khorami, M. (2018), "Experimental investigations on monotonic and cyclic behavior of steel pallet rack connections", Eng. Fail. Anal., 85, 149-166. https://doi.org/10.1016/j.engfailanal.2017.08.014.
  140. Shariati, M., Tahmasbi, F., Mehrabi, P., Bahadori, A. and Toghroli, A. (2020g), "Monotonic behavior of C and L shaped angle shear connectors within steel-concrete composite beams: an experimental investigation", Steel Compos. Struct., 35(2), 237-247. https://doi.org/10.12989/scs.2020.35.2.237.
  141. Shariati, M., Toghroli, A., Jalali, A. and Ibrahim, Z. (2017), "Assessment of stiffened angle shear connector under monotonic and fully reversed cyclic loading", Fifth International Conference on Advances in Civil, Structural and Mechanical Engineering-CSM 2017.
  142. Shawky, K., Shehab, M. and Hassanein, F. (2019), "Density of bone formed after sinus augmentation with Nanobone versus that of bone formed after sinus lift with tenting technique: Preliminary study", Egypt. J. Oral Maxillof. Surgery, 10(1), 1-8. https://doi.org/10.21608/omx.2019.7044.1023
  143. Shi, R., Gong, M., Chi, C., Huang, Y., Li, W., Li, G., Ye, J., Liao, M., Zhang, L. and Tian, W. (2019), "Nano twin-fiber membrane with osteogenic and antibacterial dual functions as artificial periosteum for long bone repairing", J. Biomed. Nanotechnol., 15(2), 272-287. https://doi.org/10.1166/jbn.2019.2687.
  144. Shokrgozar, A., Safarpour, H. and Habibi, M. (2020), "Influence of system parameters on buckling and frequency analysis of a spinning cantilever cylindrical 3D shell coupled with piezoelectric actuator", Proc. Inst. Mech. Eng., Part C: J. Mech. Eng. Sci., 234(2), 512-529. https://doi.org/10.1177/0954406219883312.
  145. Soliman, O., Hussein, A. and Gobran, H. (2020), "Evaluation and comparison of histologic changes in extraction sites grafted with simvastatin mixed with nanobone", Egypt. J. Oral Maxillof. Surgery, 11(3), 111-117. https://doi.org/10.21608/omx.2020.39319.1081
  146. Tahmasbi, F., Maleki, S., Shariati, M., Ramli Sulong, N.H. and Tahir, M.M. (2016), "Shear capacity of C-shaped and L-shaped angle shear connectors", PLoS One, 11(8), e0156989. https://doi.org/10.1371/journal.pone.0156989.
  147. Toghroli, A., Mehrabi, P., Shariati, M., Trung, N.T., Jahandari, S. and Rasekh, H. (2020), "Evaluating the use of recycled concrete aggregate and pozzolanic additives in fiber-reinforced pervious concrete with industrial and recycled fibers", Constr. Build. Mater., 252, 118997. https://doi.org/10.1016/j.conbuildmat.2020.118997.
  148. Toghroli, A., Shariati, M., Karim, M.R. and Ibrahim, Z. (2017), "Investigation on composite polymer and silica fume-rubber aggregate pervious concrete", Fifth International Conference on Advances in Civil, Structural and Mechanical Engineering-CSM 2017, Zurich, Switzerland, September.
  149. Toghroli, A., Shariati, M., Sajedi, F., Ibrahim, Z., Koting, S., Mohamad, E.T. and Khorami, M. (2018), "A review on pavement porous concrete using recycled waste materials", Smart Struct. Syst., 22(4), 433-440. https://doi.org/10.12989/sss.2018.22.4.433.
  150. Turkkan, S., Pazarceviren, A.E., Keskin, D., Machin, N.E., Duygulu, O . and Tezcaner, A. (2017), "Nanosized CaP-silk fibroin-PCL-PEG-PCL/PCL based bilayer membranes for guided bone regeneration", Mater. Sci. Eng.: C, 80, 484-493. https://doi.org/10.1016/j.msec.2017.06.016.
  151. Wang, H., Habibi, M., Marzouki, R., Majdi, A., Shariati, M., Denic, N., Zakic, A., Khorami, M., Khadimallah, M.A. and Ebid, A.A.K. (2022a), "Improving the self-healing of cementitious materials with a hydrogel system", Gel., 8(5), 278. https://doi.org/10.3390/gels8050278.
  152. Wang, J. (2018), "Study on the effect of nano-hydroxyapatite on bone repair of athletes", Videosurg. Other Miniinv. Techniq., 13(2), 221-226. https://doi.org/10.5114/wiitm.2018.73973.
  153. Wang, P., Gao, Z., Pan, F., Moradi, Z., Mahmoudi, T. and Khadimallah, M.A. (2022b), "A couple of GDQM and iteration techniques for the linear and nonlinear buckling of bidirectional functionally graded nanotubes based on the nonlocal strain gradient theory and high-order beam theory", Eng. Anal. Bound. Elem., 143, 124-136. https://doi.org/10.1016/j.enganabound.2022.06.007.
  154. Wang, X., Wu, S., Yin, J., Moradi, Z., Safa, M. and Khadimallah, M.A. (2023a), "On the electromechanical energy absorption of the reinforced composites piezoelectric MEMS via Adaptive neuro-fuzzy inference system and MCS theory", Compos. Struct., 303, 116246. https://doi.org/10.1016/j.compstruct.2022.116246.
  155. Wang, X., Wu, X., Xing, H., Zhang, G., Shi, Q.E.L., Liu, N., Yang, T., Wang, D. and Qi, F. (2017), "Porous nanohydroxyapatite/collagen scaffolds loading insulin PLGA particles for restoration of critical size bone defect", ACS Appl. Mater. Interf., 9(13), 11380-11391. https://doi.org/10.1021/acsami.6b13566.
  156. Wang, Y., Yang, J., Moradi, Z., Safa, M. and Khadimallah, M.A. (2022c), "Nonlinear dynamic analysis of thermally deformed beams subjected to uniform loading resting on nonlinear viscoelastic foundation", Eur. J. Mech.-A/Solid., 95, 104638. https://doi.org/10.1016/j.euromechsol.2022.104638.
  157. Wang, Y., Zhai, W., Yang, L., Cheng, S., Cui, W. and Li, J. (2023b), "Establishments and evaluations of post-operative adhesion animal models", Adv. Therapeut., 2200297. https://doi.org/10.1002/adtp.202200297
  158. Wang, Z., Yu, S., Xiao, Z. and Habibi, M. (2020), "Frequency and buckling responses of a high-speed rotating fiber metal laminated cantilevered microdisk", Mech. Adv. Mater. Struct., 29(10), 1475-1488. https://doi.org/10.1080/15376494.2020.1824284.
  159. Wei, X., Shariati, M., Zandi, Y., Pei, S.L., Jin, Z.B., Gharachurlu, S., Abdullahi, M.M., Tahir, M.M. and Khorami, M. (2018), "Distribution of shear force in perforated shear connectors", Steel Compos. Struct., 27(3), 389-399. https://doi.org/10.12989/scs.2018.27.3.389.
  160. Wu, J. and Habibi, M. (2021), "Dynamic simulation of the ultrafast-rotating sandwich cantilever disk via finite element and semi-numerical methods", Eng. Comput., 38(Suppl 5), 4127-4143. https://doi.org/10.1007/s00366-021-01396-6.
  161. Xia, W., Du, J., Habibi, M., Shariati, M. and Khadimallah, M.A. (2022), "Application of Chebyshev-based GDQ and Newmark methods to viscothermoelasticity responses of FG composite annular systems", Eng. Anal. Bound. Elem., 143, 28-42. https://doi.org/10.1016/j.enganabound.2022.06.003.
  162. Xiong, Q.M., Chen, Z., Huang, J.T., Zhang, M., Song, H., Hou, X.F., Li, X.B. and Feng, Z.J. (2020), "Preparation, structure and mechanical properties of Sialon ceramics by transition metal-catalyzed nitriding reaction", Rare Metal., 39(5), 589-596. https://doi.org/10.1007/s12598-020-01385-6.
  163. Xu, W., Pan, G., Moradi, Z. and Shafiei, N. (2021), "Nonlinear forced vibration analysis of functionally graded non-uniform cylindrical microbeams applying the semi-analytical solution", Compos. Struct., 275, 114395. https://doi.org/10.1016/j.compstruct.2021.114395.
  164. Yang, C., Su, C., Hu, H., Habibi, M., Safarpour, H. and Khadimallah, M.A. (2023), "Performance optimization of photovoltaic and solar cells via a hybrid and efficient chimp algorithm", Solar Energy, 253, 343-359. https://doi.org/10.1016/j.solener.2023.02.036.
  165. Yang, N., Moradi, Z., Arvin, H., Muhsen, S. and Khadimallah, M.A. (2022a), "A study on small scale thermal dynamic instability of rotating GPL-reinforced microbeams under principal parametric resonance stimulation of axial and transversal modes regarding the proportional damping", Thin Wall. Struct., 180, 109806. https://doi.org/10.1016/j.tws.2022.109806.
  166. Yang, N., Moradi, Z., Khadimallah, M.A. and Arvin, H. (2022b), "Application of the Chebyshev-Ritz route in determination of the dynamic instability region boundary for rotating nanocomposite beams reinforced with graphene platelet subjected to a temperature increment", Eng. Anal. Bound. Elem., 139, 169-179. https://doi.org/10.1016/j.enganabound.2022.03.013.
  167. Yu, X., Maalla, A. and Moradi, Z. (2022), "Electroelastic high-order computational continuum strategy for critical voltage and frequency of piezoelectric NEMS via modified multi-physical couple stress theory", Mech. Syst. Signal Pr., 165, 108373. https://doi.org/10.1016/j.ymssp.2021.108373.
  168. Zandi, Y., Shariati, M., Marto, A., Wei, X., Karaca, Z., Dao, D.K., Toghroli, A., Hashemi, M.H., Sedghi, Y., Wakil, K. and Khorami, M. (2018), "Computational investigation of the comparative analysis of cylindrical barns subjected to earthquake", Steel Compos. Struct., 28(4), 439-447. https://doi.org/10.12989/scs.2018.28.4.439.
  169. Zare, R., Najaafi, N., Habibi, M., Ebrahimi, F. and Safarpour, H. (2020), "Influence of imperfection on the smart control frequency characteristics of a cylindrical sensor-actuator GPLRC cylindrical shell using a proportional-derivative smart controller", Smart Struct. Syst., 26(4), 469-480. https://doi.org/10.12989/sss.2020.26.4.469.
  170. Zhang, P., Gao, Y., Moradi, Z., Ali, Y.A. and Khadimallah, M.A. (2022), "A semi-analytical procedure for cross section effect on the buckling and dynamic stability of composite imperfect truncated conical microbeam", Steel Compos. Struct., 44(3), 357-374. https://doi.org/10.12989/scs.2022.44.3.371.
  171. Zhang, Y., Wang, Z., Tazeddinova, D., Ebrahimi, F., Habibi, M. and Safarpour, H. (2021), "Enhancing active vibration control performances in a smart rotary sandwich thick nanostructure conveying viscous fluid flow by a PD controller", Wave. Random Complex Media, 1-24. https://doi.org/10.1080/17455030.2021.1948627
  172. Zhao, H., Li, C., Fu, Y., Oyarhossein, M.A., Habibi, M. and Safarpour, H. (2023), "Quasi-static indentation, low-velocity impact, and resonance responses of the laminated double-curved panel considering various boundary conditions", Thin Wall. Struct., 183, 110360. https://doi.org/10.1016/j.tws.2022.110360.
  173. Zhao, P., Liu, Y., Li, T., Zhou, Y., Leeflang, S., Chen, L., Wu, C., Zhou, J. and Huan, Z. (2020), "3D printed titanium scaffolds with ordered TiO2 nanotubular surface and mesoporous bioactive glass for bone repair", Progr. Nat. Sci.: Mater. Int., 30(4), 502-509. https://doi.org/10.1016/j.pnsc.2020.08.009.
  174. Zhao, Y., Moradi, Z., Davoudi, M. and Zhuang, J. (2021), "Bending and stress responses of the hybrid axisymmetric system via state-space method and 3D-elasticity theory", Eng. Comput., 1-23. https://doi.org/10.1007/s00366-020-01242-1.
  175. Zheng, B., Mao, C., Gu, T., Pan, H., Shao, C., Sun, J., Chen, C., Tang, R. and Gu, X. (2019), "Phosphorylated chitosan to promote biomimetic mineralization of type I collagen as a strategy for dentin repair and bone tissue engineering", New J. Chem., 43(4), 2002-2010. https://doi.org/10.1039/C8NJ04889D.
  176. Zheng, W., Liu, J., Oyarhossein, M.A., Safarpour, H. and Habibi, M. (2023), "Prediction of nth-order derivatives for vibration responses of a sandwich shell composed of a magnetorheological core and composite face layers", Eng. Anal. Bound. Elem., 146, 170-183. https://doi.org/10.1016/j.enganabound.2022.10.019.
  177. Zheng, X., Zhang, X., Wang, Y., Liu, Y., Pan, Y., Li, Y., Ji, M., Zhao, X., Huang, S. and Yao, Q. (2021), "Hypoxia-mimicking 3D bioglass-nanoclay scaffolds promote endogenous bone regeneration", Bioact. Mater., 6(10), 3485-3495. https://doi.org/10.1016/j.bioactmat.2021.03.011.
  178. Zheng, Y., Jin, H., Jiang, C., Moradi, Z., Khadimallah, M.A. and Moayedi, H. (2022), "Analyzing behavior of circular concrete-filled steel tube column using improved fuzzy models", Steel Compos. Struct., 43(5), 625-637. https://doi.org/10.12989/scs.2022.43.5.625.
  179. Zhou, C., Zhao, Y., Zhang, J., Fang, Y. and Habibi, M. (2020), "Vibrational characteristics of multi-phase nanocomposite reinforced circular/annular system", Adv. Nano Res., 9(4), 295-307. https://doi.org/10.12989/anr.2020.9.4.295.
  180. Zhou, J., Moradi, Z., Safa, M. and Khadimallah, M.A. (2022a), "Intelligent modeling to investigate the stability of a two-dimensional functionally graded porosity-dependent nanobeam", Comput. Concrete, 30(2), 85-97. https://doi.org/10.12989/cac.2022.30.2.085.
  181. Zhou, L., Moradi, Z., Al-Tamimi, H.M. and Ali, H.E. (2022b), "On propagation of elastic waves in an embedded sigmoid functionally graded curved beam", Steel Compos. Struct., 44(1), 17. https://doi.org/10.12989/scs.2022.44.1.017.
  182. Zhu, L., Ren, H., Habibi, M., Mohammed, K.J. and Khadimallah, M.A. (2022), "Predicting the environmental economic dispatch problem for reducing waste nonrenewable materials via an innovative constraint multi-objective chimp optimization algorithm", J. Clean. Prod., 365, 132697. https://doi.org/10.1016/j.jclepro.2022.132697.
  183. Zohery, A.A., Nour, Z.M., Abd El Rehim, S.S. and Mady, M.I. (2017), "Histomorphometric analysis of bone regeneration after use of propolis versus nanobone graft materials for the management of Class II furcation defects in dogs", Alex. Dent. J., 42(2), 198-203. https://doi.org/10.21608/adjalexu.2017.57927.