과제정보
This study was supported by the National Research Foundation of Korea (NRF) grant funded by the Korean government (NRF-2019M2D2A1A02058115) and by the Korea Evaluation Institute of Industrial Technology (KEIT) grant funded by the Korea Government, Ministry of Trade, Industrial, and Energy (Grant No. 20012453).
참고문헌
- P.E. Tuma, The Merits of Open Bath Immersion Cooling of Datacom Equipment, 26th Annual IEEE Semiconductor Thermal Measurement and Management Symposium, 2010, pp. 123-131. St. Paul, Santa Clara, CA, USA.
- B.A. Weerts, R. Weaver, D. Gallaher, P.E. Otto Van Greet, Green Data Center Cooling: Achieving 90 % Reduction: Airside Economization and Unique Indirect Evaporative, IEEE Green Technologies Conference, Tulsa, OK, USA, 2012, pp. 19-20.
- A.H. Khalaj, S.K. Halgamuge, A review on efficient thermal management of air-and liquid-cooled data centers: from chip to the cooling system, Appl. Energy 205 (2017) 1165-1188. https://doi.org/10.1016/j.apenergy.2017.08.037
- Y. Deng, C. Feng, J. E, H. Zhu, J. Chen, M. Wen, H. Yin, Effects of different coolants and cooling strategies on the cooling performance of the power lithium ion battery system: a review, Appl. Therm. Eng. 142 (2018) 10-29. https://doi.org/10.1016/j.applthermaleng.2018.06.043
- G. Xia, L. Cao, G. Bi, A review on battery thermal management in electric vehicle application, J. Power Sources 367 (2017) 90-105. https://doi.org/10.1016/j.jpowsour.2017.09.046
- M.S. El-Genk, Immersion cooling nucleate boiling of high power computer chips, Energy Convers. Manag. 53 (2012) 205-218. https://doi.org/10.1016/j.enconman.2011.08.008
- C.G.J. Prakash, R. Prasanth, Enhanced boiling heat transfer by nano structured surfaces and nanofluids, Renew. Sustain. Energy Rev. 82 (2018) 4028-4043. https://doi.org/10.1016/j.rser.2017.10.069
- L.Z. Zeng, J.F. Klausner, R. Mei, A unified model for the prediction of bubble detachment diameters in boiling systems-I. Pool boiling, Int. J. Heat Mass Tran. 36 (9) (1993), 2661-2270.
- E. Ruckenstein, A physical model for nucleate boiling heat transfer, Int. J. Heat Mass Tran. 7 (2) (1964) 191-198. https://doi.org/10.1016/0017-9310(64)90083-3
- J.B. Roll, J.E. Myers, The effect of surface tension on factors in boiling heat transfer, Am. Inst. Chem. Eng. J. 10 (4) (1964) 530-534. https://doi.org/10.1002/aic.690100422
- Y.A. Cengel, J.M. Cimbala, Fluid Mechanics-Fundamentals and Applications, third ed., McGrawHill Education, New York, 2014.
- W. Fritz, Maximum volume of vapor bubbles, Phys. Z. 36 (1935) 379-384.
- G. Hetsroni, A. Mosyak, E. Pogrebnyak, I. Sher, Z. Segal, Bubble growth in saturated pool boiling in water and surfactant solution, Int. J. Multiphas. Flow 32 (2006) 159-182. https://doi.org/10.1016/j.ijmultiphaseflow.2005.10.002
- A. Mukherjee, S.G. Kandlikar, Numerical study of single bubbles with dynamic contact angle during nucleate pool boiling, Int. J. Heat Mass Tran. 50 (2007) 127-138. https://doi.org/10.1016/j.ijheatmasstransfer.2006.06.037
- Y. Nam, J. Wu, G. Warrier, Y.S. Ju, Experimental and numerical study of single bubble dynamics on a hydrophobic surface, J. Heat Tran. 131 (2009), 121004.
- E. Teodori, T. Valente, I. Malavasi, A.S. Moita, M. Marengo, A.L.N. Moreira, Effect of extreme wetting scenarios on pool boiling conditions, Appl. Therm. Eng. 115 (2017) 1424-1437. https://doi.org/10.1016/j.applthermaleng.2016.11.079
- G. Duhar, C. Colin, Dynamics of bubble growth and detachment in a viscous shear flow, Phys. Fluid. 18 (2006), 077101-1-077101-13. https://doi.org/10.1063/1.2213638
- M. Lebon, J. Sebilleau, C. Colin, Dynamics of growth and detachment of an isolated bubble on an inclined surface, Phys. Rev. 3 (2018), 073602-1-073602-16. https://doi.org/10.1103/PhysRevFluids.3.073602
- R. Cole, H.L. Shulman, Bubble growth rates at high Jakob numbers, Int. J. Heat Mass Tran. 9 (1966) 1377-1390. https://doi.org/10.1016/0017-9310(66)90135-9
- H. Chen, G. Chen, X. Zou, Y. Yao, M. Gong, Experimental investigations on bubble departure diameter and frequency of methane saturated nucleate pool boiling at four different pressures, Int. J. Heat Mass Tran. 112 (2017) 662-675. https://doi.org/10.1016/j.ijheatmasstransfer.2017.05.031
- P. Zhou, R. Huang, S. Huang, Y. Zhang, X. Rao, Experimental investigation on bubble contact diameter and bubble departure diameter in horizontal subcooled flow boiling, Int. J. Heat Mass Tran. 149 (2020), 119105.
- P.B. Kowalczuk, J. Drzymala, Physical meaning of the Sauter mean diameter of spherical particulate matter, Part. Sci. Technol. 34 (2016) 645-647. https://doi.org/10.1080/02726351.2015.1099582
- A. Gordiychuk, M. Svanera, S. Benini, P. Poesio, Size distribution and Sauter mean diameter of micro bubbles for a Venturi type bubble generator, Exp. Therm. Fluid Sci. 70 (2016) 51-60. https://doi.org/10.1016/j.expthermflusci.2015.08.014
- E.F. Tanjung, D. Jo, Visualization study on pool boiling critical heat flux under rolling motion, Int. J. Heat Mass Tran. 153 (2020), 119620.
- E.F. Tanjung, B.O. Alunda, Y.J. Lee, D. Jo, Experimental study of bubble behaviors and CHF on printed circuit board (PCB) in saturated pool water at various inclination angles, Nucl. Eng. Technol. 50 (2018) 1068-1078. https://doi.org/10.1016/j.net.2018.06.011
- H. Jo, D. Jo, Experimental studies of condensing vapor bubbles in subcooled pool water using visual and acoustic analysis methods, Ann. Nucl. Energy 110 (2017) 171-185. https://doi.org/10.1016/j.anucene.2017.06.030