과제정보
This work was supported by National Natural Science Foundation of China (U1967202).
참고문헌
- M.M.R. Williams, S.K. Loyalka, Aerosol Science: Theory and Practice, Pergamon Press., New York, 1991.
- L.E. Herranz, J. Ball, A. Auvinen, D. Bottomley, A. Dehbi, C. Housiadas, P. Piluso, V. Layly, F. Parozzi, M. Reeks, Progress in understanding key aerosol issues, Prog. Nucl. Energy 52 (2010) 120-127. https://doi.org/10.1016/j.pnucene.2009.09.013
- A. Bentaib, N. Meynet, A. Bleyer, Overview on hydrogen risk research and development activities: methodology and open issues, Nucl. Eng. Technol. 47 (2015) 26-32. https://doi.org/10.1016/j.net.2014.12.001
- H. Nowack, H.J. Allelein, Dry Aerosol Resuspension after a Hydrogen Deflagration in the Containment, International Conference Nuclear Energy for New Europe, Portoroz, 2007.
- J.H.S. Lee, M. Berman, Hydrogen combustion and its application to nuclear reactor safety, Adv. Heat Tran. 29 (1997) 59-127. https://doi.org/10.1016/S0065-2717(08)70184-9
- Y.B. Li, H. Zhang, J.J. Xiao, J.R. Travis, T. Jordan, Numerical investigation of natural convection inside the containment with recovering passive containment cooling system using GASFLOW-MPI, Ann. Nucl. Energy 114 (2018) 1-10. https://doi.org/10.1016/j.anucene.2017.11.047
- A. Bujan, L. Ammirabile, A. Bieliauskas, B. Toth, ASTEC V1. 3 code SOPHAEROS module validation using the STORM experiments, Prog. Nucl. Energy 52 (8) (2010) 777-788. https://doi.org/10.1016/j.pnucene.2010.05.004
- N. Ardey, F. Mayinger, Aerosol resuspension by highly transient containment flow-insights by means of laser optical methods, Kerntechnik Bilingual Edition 63 (1998) 68-75. https://doi.org/10.1515/kern-1998-631-217
- C. Henry, J.P. Minier, Progress in particle resuspension from rough surfaces by turbulent flows, Prog. Energy Combust. Sci. 45 (2014) 1-53. https://doi.org/10.1016/j.pecs.2014.06.001
- J.W. Cleaver, B. Yates, Mechanism of detachment of colloidal particles from a flat substrate in a turbulent flow, J. Colloid Interface Sci. 44 (3) (1973) 464-474. https://doi.org/10.1016/0021-9797(73)90323-8
- M.F. Young, Liftoff Model for MELCOR, Sandia National Laboratories, Albuquerque New Mexico, 2015. SAND2015-6119.
- S. Morandi, F. Parozzi, A. Auvinen, Possible improvements of the aerosol resuspension model of ECART in the light of VTT tests, in: International Aerosol Conference, 2010. Helsinki, Finland, August 29-September 3, 2010.
- S. Paci, F. Parozzi, M.T. Porfiri, Validation of the ECART code for the safety analysis of fusion reactors, Fusion Eng. Des. 75 (2005) 1243-1246. https://doi.org/10.1016/j.fusengdes.2005.06.108
- M.T. Porfiri, N. Forgione, S. Paci, A. Rufoloni, Dust mobilization experiments in the context of the fusion plantsdSTARDUST facility, Fusion Eng. Des. 81 (2006) 1353-1358. https://doi.org/10.1016/j.fusengdes.2005.07.034
- S. Paci, N. Forgione, F. Parozzi, M.T. Porfiri, Bases for dust mobilization modelling in the light of stardust experiments, Nucl. Eng. Des. 235 (2005) 1129-1138. https://doi.org/10.1016/j.nucengdes.2005.01.015
- P. Chatelard, N. Reinke, S. Arndt, S. Belona, L. Cantrela, L. Carenini, K. Chevalier-Jabet, F. Cousin, J. Eckel, F. Jacq, C. Marchetto, C. Mun, L. Piar, ASTEC V2 severe accident integral code main features, current V2. 0 modelling status, perspectives, Nucl. Eng. Des. 272 (2014) 119-135. https://doi.org/10.1016/j.nucengdes.2013.06.040
- J. Xiao, T. Jordan, P. Royl, G. A. Necker, R. Redlingder, A. Svishchev, J. R. Travis, Gasflow: A Computational Fluid Dynamics Code for Gas, Aerosol, and Combustion, Volume 1, Theory and Computational Model, Karlsruhe Institute of Technology, Germany. 2014 67-70.
- F.J. Cabrejos, G.E. Klinzing, Incipient motion of solid particles in horizontal pneumatic conveying, Powder Technol. 72 (1992) 51-61. https://doi.org/10.1016/S0032-5910(92)85021-M
- B. Gonfiotti, S. Paci, Implementation and validation of a resuspension model in MELCOR 1.8.6 for fusion applications, Fusion Eng. Des. 122 (2017) 64-85. https://doi.org/10.1016/j.fusengdes.2017.09.006
- L.L. Humphries, B.A. Beeny, F. Gelbard, D.L. Louie, J. Phillips, MELCOR Computer Code Manuals Vol. 2: Reference Manual, Sandia National Laboratories, Albuquerque, 2017, pp. 770-771.
- G.L. Tan, X. Wang, Design of protective coatings for steel-made containment vessel of AP1000 nuclear power plant, Electroplating and Finishing 31 (9) (2012) 66-70.
- Regulatory Guide 1. 54, Service Level I, II and III Protective Coatings Applied to Nuclear Power Plants, U. S. Nuclear Regulatory Commission, 2010.
- M. Soltani, G. Ahmadi, On particle adhesion and removal mechanisms in turbulent flows, J. Adhes. Sci. Technol. 8 (1994) 763-785. https://doi.org/10.1163/156856194X00799
- M. Soltani, G. Ahmadi, Particle removal mechanisms under substrate acceleration, J. Adhes. Sci. Technol. 44 (1994) 161-175.
- R.B. Bird, W.E. Stewart, E.N. Lightfoot, in: W. Anderson, P. Kulek (Eds.), Transport Phenomena, John Wiley & Sons Inc., New York, 2006.
- B.J. McKeon, M.V. Zagarola, A.J. Smits, A new friction factor relationship for fully developed pipe flow, J. Fluid Mech. 538 (2005) 429-443. https://doi.org/10.1017/S0022112005005501
- F. Robbe-Valloire, Statistical analysis of asperities on a rough surface, Wear 249 (2001) 401-408. https://doi.org/10.1016/S0043-1648(01)00548-8
- G. Ahmadi, Mechanics of particle adhesion and removal, in: K.L. Mittal, R. Jaiswal (Eds.), Particle Adhesion and Removal, Wiley-Scrivener Publishing., New York, 2015, pp. 81-104.
- B. Nasr, S. Dhaniyala, G. Ahmadi, Particle Resuspension from Surfaces: overview of theoretical models and experimental data, in: R. Kohli, K.L. Mittal (Eds.), Developments in Surface Contamination and Cleaning: Types of Contamination and Contamination Resources, William Andrew Publishing., Cambridge, 2017, pp. 55-84.
- M.E. O'neill, A sphere in contact with a plane wall in a slow linear shear flow, Chem. Eng. Sci. 23 (1968) 1293-1298. https://doi.org/10.1016/0009-2509(68)89039-6
- M.W. Reeks, D. Hall, Kinetic models for particle resuspension in turbulent flows: theory and measurement, J. Aerosol Sci. 32 (2001) 1-31. https://doi.org/10.1016/S0021-8502(00)00063-X
- M.Y. Kim, Y.S. Bang, T.K. Park, D.Y. Lee, B.C. Lee, S.H. Park, Containment aerosol characterization during nuclear power plant severe accident, Part. Sci. Technol. 34 (5) (2016) 622-632. https://doi.org/10.1080/02726351.2015.1099066
- Y.R. Fu, J. Geng, D.W. Sun, Q.L. Mei, G.F. Huang, N. Pan, Aerosol natural removal analysis in containment for AP1000 nuclear power plant, Atomic Energy Sci. Technol. 51 (4) (2017) 700-705.
- Z.C. Gao, Z.F. Qiu, L.L. Tong, X.W. Cao, Aerosol pool scrubbing phenomena during the containment depressurization venting. Part I: scaling analysis, Ann. Nucl. Energy 165 (2022), 108764.
- A.C. De Los Reyes, C. Areia, G.D. Santi, International Standard Problem 40-Aerosol Deposition and Resuspension, Final Comparison Report, Organisation for Economic Co-Operation and Development-Nuclear Energy Agency., 1999.
- L. Biasi, A. De Los Reyes, M.W. Reeks, G.F. de Santi, Use of a simple model for the interpretation of experimental data on particle resuspension in turbulent flows, J. Aerosol Sci. 32 (10) (2001) 1175-1200. https://doi.org/10.1016/S0021-8502(01)00048-9
- S. Brambilla, M.J. Brown, Impact of the adhesion-force lever-arm "a" on the rock 'n' roll resuspension model and how to compute it from contact mechanics, J. Aerosol Sci. 143 (2020), 105525.
- H.R. Fan, P.C. Fan, W. Zhao, R.C. Zhao, Study on the characteristic of inorganic zinc coating for passive containment, Surf. Technol. 44 (6) (2015) 7-10.