과제정보
The authors are grateful for the support of this research by the National Science and Technology Major Project (2011ZX06901-003), and the Fund of Nuclear Power Technology Innovation Centre (Grant No. HDLCXZX-2021-ZH-024)
참고문헌
- J.M. Ryskamp, E.A. Harvego, S.T. Khericha, E.J. Gorski, G.A. Beitel, D.J. Harrell, Next generation nuclear plant: high-level functions and requirements, in: Proceedings of the 12th International Conference on Nuclear Engineering, 2004, pp. 395-402.
- L. Shi, J.Q. Zhao, B. Liu, X.W. Li, X.W. Luo, Z.M. Zhang, P. Zhang, L.B. Sun, X.X. Wu, Development strategy of key materials technology for the high temperature gas-cooled reactor, J. Tsinghua Univ. (Sci. Technol.) 61 (4) (2021) 270-278.
- D. Wang, R.G. Ballinger, H.J. Maclean, TIMCOAT: an integrated fuel performance model for coated particle fuel, Nucl. Technol. 148 (2004) 68-96. https://doi.org/10.13182/NT04-A3549
- X.T. Yang, W.P. Hu, S.Y. Jiang, K. Wong, J.Y. Tu, Mechanism analysis of quasi-static dense pebble flow in pebble bed reactor using phenomenological approach, Nucl. Eng. Des. 250 (2012) 247-259. https://doi.org/10.1016/j.nucengdes.2012.06.011
- S. Wang, S. Wang, B.W. Wu, Y.L. Lu, K.F. Zhang, H.L. Chen, Effect of packing structure on anisotropic effective thermal conductivity of thin ceramic pebble bed, Nucl. Eng. Technol. 53 (7) (2021) 2174-2183. https://doi.org/10.1016/j.net.2021.01.013
- M.A. Alzamly, M. Aziz, A.A. Badawi, H.A. Gabal, A.,R.A. Gadallah, Burnup analysis for HTR-10 reactor core loaded with uranium and thorium oxide, Nucl. Eng. Technol. 52 (4) (2020) 674-680. https://doi.org/10.1016/j.net.2019.09.012
- N. Gui, X. Yang, J. Tu, S. Jiang, Effect of bed configuration on pebble flow uniformity and stagnation in the pebble bed reactor, Nucl. Eng. Des. 270 (2014) 295-301. https://doi.org/10.1016/j.nucengdes.2013.12.055
- C.H. Rycroft, G.S. Grest, J.W. Landry, M.Z. Bazant, Analysis of granular flow in a pebble-bed nuclear reactor, Phys. Rev. 74 (2) (2006), 021306.
- X. Jia, N. Gui, H. Wu, X.T. Yang, J.Y. Tu, S.Y. Jiang, Numerical study and analysis of the effects of recirculation flow rates in drained pebble flow, Powder Technol. 314 (2016) 608-619.
- V.B. Khane, Experimental and Computational Investigation of Flow of Pebbles in a Pebble Bed Nuclear Reactor, Missouri University of Science and Technology, Rolla, Missouri, USA, 2014.
- D. Sohn, Y. Lee, M.Y. Ahn, Y.H. Park, S. Cho, Numerical prediction of packing behavior and thermal conductivity of pebble beds according to pebble size distributions and friction coefficients, Fusion Eng. Des. 137 (2018) 182-190. https://doi.org/10.1016/j.fusengdes.2018.09.012
- Y.A. Hassan, E.E. Dominguez-Ontiveros, Flow visualization in a pebble bed reactor experiment using PIV and refractive index matching techniques, Nucl. Eng. Des. 238 (11) (2008) 3080-3085. https://doi.org/10.1016/j.nucengdes.2008.01.027
- A. Shams, F. Roelofs, E. Komen, E. Baglietto, Quasi-direct numerical simulation of a pebble bed configuration. Part I: flow (velocity) field analysis, Nucl. Eng. Des. 263 (2013) 473-489. https://doi.org/10.1016/j.nucengdes.2012.06.016
- V.B. Khane, M.M. Taha, M.H. Al-Dahhan, Experimental investigation of the overall residence time of pebbles in a pebble bed reactor (PBR) using radioactive pebble[J], Prog. Nucl. Energy 93 (2016a) 267-276. https://doi.org/10.1016/j.pnucene.2016.09.001
- X. Liu, N. Gui, X. Yang, J.Y. Tu, S.Y. Jiang, A new discrete element-embedded finite element method for transient deformation, movement and heat transfer in packed bed, Int. J. Heat Mass Tran. 165 (2021a), 120714.
- Y.J. Liu, S.F. Peng, N. Gui, X.T. Yang, J.Y. Tu, S.Y. Jiang, An improved high accuracy PTV algorithm for pebble flow, Powder Technol. 387 (2021b) 227-238. https://doi.org/10.1016/j.powtec.2021.04.025
- A.C. Kadark, M.Z. Bazant, Pebble Flow Experiments for Pebble Bed Reactors, 2nd International Topical Meeting on High Temperature Reactor Technology, Beijing, 2004.
- V.B. Khane, I.A. Said, M.H. Al-Dahhan, Experimental investigation of pebble flow dynamics using radioactive particle tracking technique in a scaled-down Pebble Bed Modular Reactor (PBMR), Nucl. Eng. Des. 302 (2016b) 1-11. https://doi.org/10.1016/j.nucengdes.2016.03.031
- P.Y. Zhang, Q.Q. Guo, S. Pang, Y.L. Sun, Y. Chen, Experimental research on vertical mechanical performance of embedded through-penetrating steel-concrete composite joint in high-temperature gas-cooled reactor pebble-bed module, Nucl. Eng. Technol. 54 (1) (2022) 357-373. https://doi.org/10.1016/j.net.2021.07.014
- D. Matzner, PBMR Project status and the way ahead, in: 2nd International Topical Meeting on High Temperature Reactor Technology. Beijing, September, 2004, pp. 22-24.
- X.T. Yang, W.P. Hu, S.Y. Jiang, Experimental investigation on feasibility of two region-designed pebble-bed high-temperature gas-cooled reactor, J. Nucl. Sci. Technol. 46 (4) (2009) 374-381. https://doi.org/10.1080/18811248.2007.9711543
- X. Jia, N. Gui, X. Yang, J. Tu, H. Jia, S. Jiang, Experimental study of flow field characteristics on bed configurations in the pebble bed reactor, Ann. Nucl. Energy 102 (2017) 1-10. https://doi.org/10.1016/j.anucene.2016.12.009
- L. Liu, J. Deng, D. Zhang, C. Wang, S.Z. Qiu, G. Su, Experimental analysis of flow and convective heat transfer in the water-cooled packed pebble bed nuclear reactor core, Prog. Nucl. Energy 122 (2020), 103298.
- J. Haervig, U. Kleinhans, C. Wieland, H. Spliethoff, A.L. Jensen, K.S. Rensen, T.J. Condra, On the adhesive JKR contact and rolling models for reduced particle stiffness discrete element simulations, Powder Technol. 319 (2017) 472-482. https://doi.org/10.1016/j.powtec.2017.07.006
- S.S. Park, E.S. Kim, Jamming probability of granular flow in 3D hopper with shallow columns: DEM simulations, Granul. Matter 22 (4) (2020) 77.
- H. Wu, N. Gui, X.T. Yang, J.Y. Tu, S.Y. Jiang, Numerical simulation of heat transfer in packed pebble beds: CFD-DEM coupled with particle thermal radiation, Int. J. Heat Mass Tran. 110 (2017) 393-405. https://doi.org/10.1016/j.ijheatmasstransfer.2017.03.035
- Y. Lee, S. Yu, M.Y. Ahn, Y.H. Park, D. Sohn, Numerical investigation of mechanical and thermal characteristics of binary-sized pebble beds using discrete element method, Fusion Eng. Des. 146 (2019) 2285-2291. https://doi.org/10.1016/j.fusengdes.2019.03.173
- G.K.P. Barrios, N. Jimenez-Herrera, L.M. Tavares, Simulation of particle bed breakage by slow compression and impact using a DEM particle replacement model, Adv. Powder Technol. 31 (7) (2020) 2749-2758. https://doi.org/10.1016/j.apt.2020.05.011
- M. Ebrahimi, A. Yaraghi, B. Jadidi, F. Ein-Mozaffari, A. Lohi, Assessment of bi-disperse solid particles mixing in a horizontal paddle mixer through experiments and DEM, Powder Technol. 381 (2020) 129-140. https://doi.org/10.1016/j.powtec.2020.11.041
- L. Benvenuti, C. Kloss, S. Pirker, Identification of DEM simulation parameters by artificial neural networks and bulk experiments, Powder Technol. 291 (2016) 456-465. https://doi.org/10.1016/j.powtec.2016.01.003
- F. Ye, C. Wheeler, B. Chen, J. Hu, K. Chen, W. Chen, Calibration and verification of DEM parameters for dynamic particle flow conditions using a backpropagation neural network, Adv. Powder Technol. 30 (2019) 292-301. https://doi.org/10.1016/j.apt.2018.11.005
- R. Kumar, C.M. Patel, A.K. Jana, S.R. Gopireddy, Prediction of hopper discharge rate using combined discrete element method and artificial neural network, Adv. Powder Technol. 29 (2018) 2822-2834. https://doi.org/10.1016/j.apt.2018.08.002
- H. Wu, S. Hao, A deep neural network model of particle thermal radiation in packed bed, Proc. AAAI Conf. Artif. Intell. 34 (1) (2020) 1029-1036.
- X.J. Huang, Q.J. Zheng, A.B. Yu, W.Y. Yan, Shape optimization of conical hoppers to increase mass discharging rate, Powder Technol. 361 (2020) 179-189. https://doi.org/10.1016/j.powtec.2019.09.043
- R. Hesse, F. Krull, S. Antonyuk, Prediction of random packing density and flowability for non-spherical particles by deep convolutional neural networks and Discrete Element Method simulations, Powder Technol. 393 (2021) 559-581. https://doi.org/10.1016/j.powtec.2021.07.056
- Z. Liang, Z. Nie, A. An, J. Gong, X. Wang, A particle shape extraction and evaluation method using a deep convolutional neural network and digital image processing, Powder Technol. 353 (2019) 156-170. https://doi.org/10.1016/j.powtec.2019.05.025
- Z. Liao, Y. Yang, C. Sun, R. Wu, Z. Duan, Y. Wang, X. Li, J. Xu, Image-based prediction of granular flow behaviors in a wedge-shaped hopper by combing DEM and deep learning methods, Powder Technol. 383 (2021) 159-166. https://doi.org/10.1016/j.powtec.2021.01.041
- P.A. Cundall, O.D.L. Strack, A discrete numerical model for granular assemblies, Geotechnique 29 (1979) 47-65. https://doi.org/10.1680/geot.1979.29.1.47
- H.P. Zhu, Z.Y. Zhou, R.Y. Yang, A.B. Yu, Discrete particle simulation of particulate systems: theoretical developments, Chem. Eng. Sci. 62 (2007) 3378-3396. https://doi.org/10.1016/j.ces.2006.12.089
- P.A. Cundall, O. Strack, A discrete numerical model for granular assemblies, Geotechnique 30 (3) (2008) 331-336. https://doi.org/10.1680/geot.1980.30.3.331
- J. Horabik, M. Molenda, Parameters and contact models for DEM simulations of agricultural granular materials: a review, Biosyst. Eng. 147 (2016) 206-225. https://doi.org/10.1016/j.biosystemseng.2016.02.017
- Y. Li, N. Gui, X.T. Yang, J.Y. Tu, S.Y. Jiang, Effect of a flow-corrective insert on the flow pattern in a pebble bed reactor, Nucl. Eng. Des. 300 (2016) 495-505. https://doi.org/10.1016/j.nucengdes.2016.02.002
- M.Q. Wu, N. Gui, H. Wu, X.T. Yang, J.Y. Tu, S.Y. Jiang, Numerical study of mixing pebble flow with different density in circulating packed bed, Ann. Nucl. Energy 130 (2019a) 483-492. https://doi.org/10.1016/j.anucene.2019.03.020
- M.Q. Wu, N. Gui, H. Wu, X.T. Yang, J.Y. Tu, S.Y. Jiang, Effects of density difference and loading ratio on pebble flow in a three-dimensional two-region-designed pebble bed, Ann. Nucl. Energy 133 (2019b) 924-936. https://doi.org/10.1016/j.anucene.2019.07.032
- S.Y. Jiang, X.T. Yang, Z.W. Tang, W.J. Wang, J.Y. Tu, Z.Y. Liu, J. Li, Experimental and numerical validation of a two-region-designed pebble bed reactor with dynamic core, Nucl. Eng. Des. 246 (2012) 277-285. https://doi.org/10.1016/j.nucengdes.2012.02.005
- S. Jiang, J. Tu, X. Yang, N. Gui, A review of pebble flow study for pebble bed high temperature gas-cooled reactor, Exp. Comput. Multiphase Flow 1 (3) (2019) 159-176. https://doi.org/10.1007/s42757-019-0006-1
- A. Krizhevsky, I. Sutskever, G. Hinton, ImageNet classification with deep convolutional neural networks, Advances in neural information processing systems 25 (2012) 1097-1105.
- K. Simonyan, A. Zisserman, Very deep convolutional networks for large-scale image recognition, Computer Science (2015) 1409-1556.
- K. He, X. Zhang, S. Ren, J. Sun, Deep residual learning for image recognition, IEEE (2016) 770-778.
- Y.L. Boureau, F. Bach, Y. LeCun, J. Ponce, Learning mid-level features for recognition, IEEE.Comput. Soc. Conf. Comput. Vis. Pattern Recogn. (2010) 2559-2566.
- Y. LeCun, B. Boser, J.S. Denker, D. Henderson, R.E. Howard, W. Hubbard, L.D. Jackel, Backpropagation applied to handwritten zip code recognition, Neural Comput. 1 (1989) 541-551. https://doi.org/10.1162/neco.1989.1.4.541
- W.A. Beverloo, H.A. Leniger, J. Velde, The flow of granular solids through orifices, Chem. Eng. Sci. 15 (3-4) (1961) 260-269. https://doi.org/10.1016/0009-2509(61)85030-6
- M.Q. Wu, N. Gui, X. Liu, X.T. Yang, J.Y. Tu, S.Y. Jiang, Numerical analysis of the effects of different outlet sizes on pebble flows in HTR-10 pebble beds, Nucl. Eng. Des. 387 (2022), 111620.
- W.P. Hu, Experimental and Theoretical Research on Pebble Flow in two-Region Pebble Bed Doctor Thesis, Tsinghua University, Beijing, China, 2009.
- S. Zaghbani, N. Boujneh, M.S. Bouhlel, Age estimation using deep learning, Comput. Electr. Eng. 68 (2018) 337-347. https://doi.org/10.1016/j.compeleceng.2018.04.012
- W.Z. Cao, V. Mirjalili, S. Raschka, Rank consistent ordinal regression for neural networks with application to age estimation, Pattern Recogn. Lett. 140 (2020) 325-331. https://doi.org/10.1016/j.patrec.2020.11.008
- D.P. Kingma, J. Ba, Adam: A Method for Stochastic Optimization, International Conference on Learning Representations, San Diego, CA, USA, 2015.
- Z.H. Liu, R.H. Meng, H.X. Dai, Q.Y. Hong, Q.H. Yan, Y.T. Liu, H.T. Wang, T. Chen, Evaluation of heavy metals pollution in surface sediments using an improved geo-accumulation index method, J.Agro.Environ.Sci 38 (9) (2019) 2157-2164.
- S. Urolagin, K.V. Prema, N.V.S. Reddy, Generalization capability of artificial neural network incorporated with pruning method, Int. Conf.Adv.Comput vol. 7135 (2011) 171-178. Networking and Security. Springer, Berlin, Heidelberg.
- H. Wu, N. Gui, X.T. Yang, J.Y. Tu, S.Y. Jiang, Parameter analysis and wall effect of radiative heat transfer for CFD-DEM simulation in nuclear packed pebble bed, Exp.Comput. Multiphase Flow 3 (4) (2021a) 250-257. https://doi.org/10.1007/s42757-020-0058-2
- M.Q. Wu, N. Gui, X.T. Yang, J.Y. Tu, S.Y. Jiang, Effects of 3D contraction on pebble flow uniformity and stagnation in pebble beds, Nucl. Eng. Technol. 53 (5) (2021b) 1416-1428. https://doi.org/10.1016/j.net.2020.10.022
- B. Yan, R.A. Regueiro, S. Sture, Three-dimensional ellipsoidal discrete element modeling of granular materials and its coupling with finite element facets, Eng. Comput. 27 (3-4) (2009) 519-550. https://doi.org/10.1108/02644401011044603