References
- Asadi, M.S. and Rasouli, V. (2012), "Physical Simulation of Asperity Degradation Using Laboratorial Shear Tests of Artificial Fractures", Proceedings of EUROCK 2012, ISRM International Symposium: Rock Engineering and Technology for Sustainable Underground Construction, May 28-30, Stockholm, Sweden, p.14.
- Barton, N. (1973), "Review of a New Shear Strength Criterion for Rock Joints", Engineering Geology, Vol.7, No.4, pp.287-332. https://doi.org/10.1016/0013-7952(73)90013-6
- Barton, N. (1976), "The Shear Strength of Rock and Rock Joints. Int", J. Rock Mech. Min. Sci., Vol.13, No.9, pp.255-279. https://doi.org/10.1016/0148-9062(76)90003-6
- Barton, N. and Bandis, S. (1982), "Effects of Block Size on the Shear behaviour of Jointed Rock", 23rd U.S. Symp. on Rock Mechanics, Berkeley, USA, pp.739-760.
- Barton, N. and Choubey, V. (1977), "The Shear Strength of Rock Joints in Theory and Practice", Rock mechanics and Rock engineering, Vol.10, No.1-2, pp.1-65. https://doi.org/10.1007/BF01261801
- Grasselli, G. (2001), "Shear Strength of Rock Joints based on Quantified Surface Description", Ph.D thesis, Univerist? di Parma, Italy.
- Huang, T. H. and Doong, Y. S. (1990), "Anisotropic Shear Strength of Rock Joints", Proc., Int. Symp. on Rock Joints, Loen, Norway, pp.211-218.
- Jang, H.S., Sim, M.Y., and Jang, B.A. (2021), "New Joint Roughness Coefficient and Shear Strength Criterion Based on Experimental Verification of Standard Roughness Profile", J. of Engineering Geology, Vol.31, No.4, pp.561-577.
- Jing, L. (1990), "Numerical Modeling of Jointed Rock Masses by Distinct Element Method for Two, and Three-dimensional Problems", PhD thesis, Lulea University of Technology, Lulea.
- Johnston, I. W. and Lam, T. S. K. (1989), "Shear behavior of Regular Triangular Concrete/rock Joints Analysis", Journal of geotechnical engineering, Vol.115, No.5, pp.711-727. https://doi.org/10.1061/(ASCE)0733-9410(1989)115:5(711)
- Jing, L., Nordlund, E., and Stephansson, O. (1992), "An Experimental Study on the Anisotropy and Stress-dependency of the Strength and Deformability of Rock Joints", Int. J. Rock Mech. Min. Sci. Geomech. Abstr., Vol.29, No.6, pp.535-542. https://doi.org/10.1016/0148-9062(92)91611-8
- Kim, D.Y. (2002), "Roughness Effects on the Shear Behavior Rock Joints", J. of Korean Geotechnical Society, Vol.18, No.3, pp.56-57.
- Kim, D.B., Lee, S.G., and Lee, J.I. (2001), "The Engineering Properties of Shear Strength of Rock Joints in Korea", J. of Korean Geotechnical Society, Vol.17, No.4, pp.301-315.
- Kim, D.Y. and Lee, Y.N. (2007), "New Peak Shear Strength Criteria for Anisotropic Rock Joints Using Quantified Joint Roughness Parameters", 11th Congress of the International Society for Rock mechanics, Lisbon, pp.355-358.
- Kwon, J.W., Kim, S.M., and Yoon, J.S. (2000), "A Study on Residual Stress Characteristics for Joint of Rock in Ring Shear Tests", J. of Korean Geotechnical Society, Vol.16, No.6, pp.35-41.
- Ladanyi, B. and Archambault, G. (1970), "Simulation of the Shear behavior of a Jointed Rock Mass", Proc. 11th. U.S. Symp. on Rock Mechanics, pp.105-125.
- Lee, I-M, Hong, E-S, Bae, S-I, and Lee, S-W (2002), "Analysis of the Rock Joint Strength Characteristics Using New Rock Joint Roughness Quantification Method", J. of Korean Geotechnical Society, Vol. 18, No.4, pp.229-238.
- Lee, S-W, Hong, E-S, Bae, S-I, and Lee, I-M (2006), "Modelling of Rock Joint Shear Strength Using Surface Roughness Parameter, Rs", Tunn. Undergr. Sp. Tech., Vol.21, No.3-4.
- Lee, Y-K, Park, J-W, and Song, J-J (2014), "Model for the Shear behavior of Rock Joints under CNL and CNS Conditions", Int. J. Rock. Mech. Min. Sci., Vol.70, No.9, pp.252-263. https://doi.org/10.1016/j.ijrmms.2014.05.005
- Newland, P. L. and Allely, B. H. (1957), "Volume Changes in Drained Triaxial Tests on Granular Materials", Geotechnique, Vol.7, No.1, pp.17-34. https://doi.org/10.1680/geot.1957.7.1.17
- Oh, J. (2005), "Three Dimensional Numerical Modeling of Excavation in Rock with Dilatant Joints", Ph.D. Dissertation, University of Illinois at Urbana-Champaign.
- Patton, F. D. (1966), "Multiple Modes of Shear Failure in Rock", Proc. 1st Congr. Int. Soc. Rock Mech., Lisbon, pp.509-513.
- Plesha, M. E. (1987), "Constitutive Models for Rock Discontinuities with Dilatancy and Surface Degradation", Int. J. Numer. Anal. Meth. Geomech., Vol.11, No.4, pp.345-362. https://doi.org/10.1002/nag.1610110404
- Reeves, M. J. (1985), "Rock Surface Roughness and Frictional Strength", Int. J. of Rock Mech. and Min. Sci. and Geo. Abst., Vol.22, No.6, pp.429-442. https://doi.org/10.1016/0148-9062(85)90007-5
- Rowe, P. W., Barden, I., and Lee, I. K. (1964), "Energy Components During the Triaxial Cell and Direct Shear Tests", Geotechnique, Vol.14, No.3, pp.247-261. https://doi.org/10.1680/geot.1964.14.3.247
- Saeb, S. (1990), "A Variance on the Ladanyi and Archambault's Shear Strength Criterion", International symposium on rock joints, Barton & Stephansson (eds), Balkema, pp.701-705.
- Son, M. (2020), "Shear Strength of Rock Joints and Its Estimation", KSCE J. Civ. Eng. Vol.24, pp.2931-2938. https://doi.org/10.1007/s12205-020-0296-7
- Tse, R. and Cruden, D. M. (1979), "Estimating Joint Roughness Coefficients", Int. J. Rock Mech. Min. Sci. and Geomech, Abstr, Vol.16, pp.303-307. https://doi.org/10.1016/0148-9062(79)90241-9
- Zhao, J. (1997a), "Joint Surface Matching and Shear Strength Part A - Joint Matching Coefficient (JMC)", Int. J. Rock Mech. Min. Sci., Vol.34, No.2, pp.173-178. https://doi.org/10.1016/S0148-9062(96)00062-9
- Zhao, J. (1997b), "Joint Surface Matching and Shear Strength Part B - JRC-JMC Shear Strength Criterion", Int. J. Rock Mech. Min. Sci., Vol.34, No.2, pp.179-185. https://doi.org/10.1016/S0148-9062(96)00063-0