DOI QR코드

DOI QR Code

Resistance of concrete made of fibers in weight lifting slabs against impact in sports training

  • Zhi Li (Physical Education Department, Tianjin University of Commerce)
  • 투고 : 2022.04.01
  • 심사 : 2023.03.23
  • 발행 : 2023.05.10

초록

A significant component of many civil constructions such as buildings, reservoirs, bridges, and sports halls, concrete has become increasingly popular due to its versatile properties. Concrete's internal characteristics change due to the use of different types of fibers, including changes in its microstructure, volume, and hole dimensions. Additionally, the type, dimensions, and distribution of fibers in concrete can affect the results of flexural strength tests by affecting its compressive and tensile strength. Due to a lack of information, fiber concrete is a new composite material in the production industry that requires laboratory studies to determine its behavior. This study investigated the bending behavior of multilayer slabs made of concrete reinforced by polyamide-propylene fibers against impact in weight lifting exercises. Results showed that adding fibers to concrete slab samples improved the mechanical properties while replacing them hurt the mechanical properties and failure of polymer fiber-reinforced concrete. On the other hand, adding and replacing fibers increases durability and has a positive effect.

키워드

참고문헌

  1. Adamian, A., Safari, K.H., Sheikholeslami, M., Habibi, M., Al-Furjan, M. and Chen, G. (2020), "Critical temperature and frequency characteristics of GPLs-reinforced composite doubly curved panel", Appl. Sci., 10(9), 3251. https://doi.org/10.3390/app10093251.
  2. Al-Furjan, M., Dehini, R., Khorami, M., Habibi, M. and won Jung, D. (2020a), "On the dynamics of the ultra-fast rotating cantilever orthotropic piezoelectric nanodisk based on nonlocal strain gradient theory", Compos. Struct., 255, 112990. https://doi.org/10.1016/j.compstruct.2020.112990.
  3. Al-Furjan, M., Fereidouni, M., Habibi, M., Abd Ali, R., Ni, J. and Safarpour, M. (2020b), "Influence of in-plane loading on the vibrations of the fully symmetric mechanical systems via dynamic simulation and generalized differential quadrature framework", Eng. Comput., 1-23. https://doi.org/10.1007/s00366-020-01177-7.
  4. Al-Furjan, M., Fereidouni, M., Sedghiyan, D., Habibi, M. and won Jung, D. (2020c), "Three-dimensional frequency response of the CNT-Carbon-Fiber reinforced laminated circular/annular plates under initially stresses", Compos. Struct., 257, 113146. https://doi.org/10.1016/j.compstruct.2020.113146.
  5. Ali-Benyahia, K., Kenai, S., Ghrici, M., Sbartai, Z.M. and Elachachi, S.M. (2023), "Analysis of the accuracy of in-situ concrete characteristic compressive strength assessment in real structures using destructive and non-destructive testing methods", Constr. Build. Mater., 366, 130161. https://doi.org/10.1016/j.conbuildmat.2022.130161.
  6. Baba, S., Fukuda, N., Kobayashi, H., Tsunemi, A., Akiya, Y., Matsumoto, T. and Abe, M. (2023), "Development of gene silencer pyrrole-imidazole polyamides targeting GSK3β for treatment of polycystic kidney diseases", J. Pharmacol. Sci., 151(3), 148-155. https://doi.org/10.1016/j.jphs.2023.01.001.
  7. Bai, Y., Alzahrani, B., Baharom, S. and Habibi, M. (2020), "Semi-numerical simulation for vibrational responses of the viscoelastic imperfect annular system with honeycomb core under residual pressure", Eng. Comput., 1-26. https://doi.org/10.1007/s00366-020-01191-9.
  8. Cai, J., Chen, J.G., Shi, J., Tian, Q., Xu, G. and Du, Y. (2022a), "A novel approach to evaluate the clogging resistance of pervious concrete", Case Stud. Constr. Mater., 16, e00864. https://doi.org/10.1016/j.cscm.2021.e00864.
  9. Cai, J., Liu, Z., Xu, G., Tian, Q., Shen, W., Li, B. and Chen, T. (2022b), "Mix design methods for pervious concrete based on the mesostructure: Progress, existing problems and recommendation for future improvement", Case Stud. Constr. Mater., 17, e01253. https://doi.org/10.1016/j.cscm.2022.e01253.
  10. Cheng, F., Liang, H., Wang, H., Zong, G. and Xu, N. (2022), "Adaptive neural self-triggered bipartite fault-tolerant control for nonlinear MASs with dead-zone constraints", IEEE Trans. Autom. Sci. Eng., 1-12. https://doi.org/10.1109/tase.2022.3184022.
  11. Dai, Z., Jiang, Z., Zhang, L. and Habibi, M. (2021a), "Frequency characteristics and sensitivity analysis of a size-dependent laminated nanoshell", Adv. Nano Res., 10(2), 175. https://doi.org/10.12989/anr.2021.10.2.175.
  12. Dai, Z., Wu, S., Habibi, M. and Ali, H.E. (2023), "Application of point interpolation mesh-free method for magneto/electro rheological vibrations of sandwich conical panels", Aerosp. Sci. Technol., 135, 108180. https://doi.org/10.1016/j.ast.2023.108180.
  13. Dai, Z., Zhang, L., Bolandi, S.Y. and Habibi, M. (2021b), "On the vibrations of the non-polynomial viscoelastic composite open-type shell under residual stresses", Compos. Struct., 263, 113599. https://doi.org/10.1016/j.compstruct.2021.113599.
  14. DeWeese, B.H., Serrano, A.J., Scruggs, S.K. and Sams, M.L. (2012), "The clean pull and snatch pull: Proper technique for weightlifting movement derivatives", Strength Condit. J., 34(6), 82-86. https://doi.org/10.1519/SSC.0b013e31826f1023.
  15. Dong, Y., Gao, Y., Zhu, Q., Moradi, Z. and Safa, M. (2022), "TE-GDQE implementation to investigate the vibration of FG composite conical shells considering a frequency controller solid ring", Eng. Anal. Bound. Elem., 138, 95-107. https://doi.org/10.1016/j.enganabound.2022.01.017.
  16. Dong, Z., Quan, W., Ma, X., Li, X. and Zhou, J. (2023), "Asymptotic homogenization of effective thermal-elastic properties of concrete considering its three-dimensional mesostructure", Comput. Struct., 279, 106970. https://doi.org/10.1016/j.compstruc.2022.106970.
  17. Ebrahimi, F., Habibi, M. and Safarpour, H. (2019), "On modeling of wave propagation in a thermally affected GNP-reinforced imperfect nanocomposite shell", Eng. Comput., 35(4), 1375-1389. https://doi.org/10.1007/s00366-018-0669-4.
  18. Ebrahimi, F., Shafiei, N., Kazemi, M. and Mousavi Abdollahi, S.M. (2017), "Thermo-mechanical vibration analysis of rotating nonlocal nanoplates applying generalized differential quadrature method", Mech. Adv. Mater. Struct., 24(15), 1257-1273. https://doi.org/10.1080/15376494.2016.1227499.
  19. Ehyaei, J., Akbarshahi, A. and Shafiei, N. (2017), "Influence of porosity and axial preload on vibration behavior of rotating FG nanobeam", Adv. Nano Res., 5(2), 141. https://doi.org/10.12989/anr.2017.5.2.141.
  20. Esmailpoor Hajilak, Z., Pourghader, J., Hashemabadi, D., Sharifi Bagh, F., Habibi, M. and Safarpour, H. (2019), "Multilayer GPLRC composite cylindrical nanoshell using modified strain gradient theory", Mech. Bas. Des. Struct. Mach., 47(5), 521-545. https://doi.org/10.1080/15397734.2019.1566743.
  21. Fan, L., Huang, Y., Ji, D., Moradi, Z., Safa, M. and Amine Khadimallah, M. (2022a), "Interaction of angular velocity and temperature rise in the thermo-inertia bifurcation buckling of FG laminated nanocomposite annular plates", Eng. Struct., 265, 114518. https://doi.org/10.1016/j.engstruct.2022.114518.
  22. Fan, L., Kong, D., Song, J., Moradi, Z., Safa, M. and Khadimallah, M.A. (2022b), "Optimization dynamic responses of laminated multiphase shell in thermo-electro-mechanical conditions", Adv. Nano Res., 13(1), 29-45. https://doi.org/10.12989/anr.2022.13.1.029.
  23. Fang, Z., Zhu, Z., Wu, P. and Moradi, Z. (2023), "Vibration and damping analysis of sandwich electrorheological fluid deep arches with bi-directional FGM containers", Eng. Struct., 276, 115325. https://doi.org/10.1016/j.engstruct.2022.115325.
  24. Fiore, A., Porco, F., Uva, G. and Mezzina, M. (2013), "On the dispersion of data collected by in situ diagnostic of the existing concrete", Constr. Build. Mater., 47, 208-217. https://doi.org/10.1016/j.conbuildmat.2013.05.001.
  25. Gao, L., Li, J., Ju, J., Cheng, B., Kang, W. and Deng, N. (2021), "High-performance all-solid-state polymer electrolyte with fast conductivity pathway formed by hierarchical structure polyamide 6 nanofiber for lithium metal battery", J. Energy Chem., 54, 644-654. https://doi.org/10.1016/j.jechem.2020.06.035.
  26. Gerharz, B. (1999), "Pavements on the base of polymer-modified drainage concrete", Coll. Surf. A: Physicochem. Eng. Aspect., 152(1), 205-209. https://doi.org/10.1016/S0927-7757(98)00831-0.
  27. Ghadiri, M., Hosseini, S.H.S. and Shafiei, N. (2016a), "A power series for vibration of a rotating nanobeam with considering thermal effect", Mech. Adv. Mater. Struct., 23(12), 1414-1420. https://doi.org/10.1080/15376494.2015.1091527.
  28. Ghadiri, M., Shafiei, N. and Alavi, H. (2017a), "Thermo-mechanical vibration of orthotropic cantilever and propped cantilever nanoplate using generalized differential quadrature method", Mech. Adv. Mater. Struct., 24(8), 636-646. https://doi.org/10.1080/15376494.2016.1196770.
  29. Ghadiri, M., Shafiei, N. and Alireza Mousavi, S. (2016b), "Vibration analysis of a rotating functionally graded tapered microbeam based on the modified couple stress theory by DQEM", Appl. Phys. A, 122(9), 837. https://doi.org/10.1007/s00339-016-0364-5.
  30. Ghadiri, M., Shafiei, N. and Babaei, R. (2017b), "Vibration of a rotary FG plate with consideration of thermal and Coriolis effects", Steel Compos. Struct., 25(2), 197-207. https://doi.org/10.12989/scs.2017.25.2.197.
  31. Ghadiri, M., Shafiei, N. and Hossein Alavi, S. (2017c), "Vibration analysis of a rotating nanoplate using nonlocal elasticity theory", J. Solid Mech., 9(2), 319-337.
  32. Ghadiri, M., Shafiei, N., Salekdeh, S.H., Mottaghi, P. and Mirzaie, T. (2016c), "Investigation of the dental implant geometry effect on stress distribution at dental implant-bone interface", J. Brazil. Soc. Mech. Sci. Eng., 38(2), 335-343. https://doi.org/10.1007/s40430-015-0472-8.
  33. Ghasemi, M., Zhang, C., Khorshidi, H., Zhu, L. and Hsiao, P.-C. (2023), "Seismic upgrading of existing RC frames with displacement-restraint cable bracing", Eng. Struct., 282, 115764. https://doi.org/10.1016/j.engstruct.2023.115764.
  34. Guo, J., Baharvand, A., Tazeddinova, D., Habibi, M., Safarpour, H., Roco-Videla, A. and Selmi, A. (2021a), "An intelligent computer method for vibration responses of the spinning multilayer symmetric nanosystem using multi-physics modeling", Eng. Comput., 1-22. https://doi.org/10.1007/s00366-021-01433-4.
  35. Guo, Y., Mi, H. and Habibi, M. (2021b), "Electromechanical energy absorption, resonance frequency, and low-velocity impact analysis of the piezoelectric doubly curved system", Mech. Syst. Signal Pr., 157, 107723. https://doi.org/10.1016/j.ymssp.2021.107723.
  36. Habibi, M., Darabi, R., Sa, J.C.D. and Reis, A. (2021), "An innovation in finite element simulation via crystal plasticity assessment of grain morphology effect on sheet metal formability", Proc. Inst. Mech. Eng., Part L: J. Mater.: Des. Appl., 235(8), 1937-1951. https://doi.org/10.1177/14644207211024686.
  37. Habibi, M., Hashemi, R., Ghazanfari, A., Naghdabadi, R. and Assempour, A. (2018a), "Forming limit diagrams by including the M-K model in finite element simulation considering the effect of bending", Proc. Inst. Mech. Eng., Part L: J. Mater.: Des. Appl., 232(8), 625-636. https://doi.org/10.1177/1464420716642258.
  38. Habibi, M., Hashemi, R., Sadeghi, E., Fazaeli, A., Ghazanfari, A. and Lashini, H. (2016), "Enhancing the mechanical properties and formability of low carbon steel with dual-phase microstructures", J. Mater. Eng. Perform., 25(2), 382-389. https://doi.org/10.1007/s11665-016-1882-1.
  39. Habibi, M., Hashemi, R., Tafti, M.F. and Assempour, A. (2018b), "Experimental investigation of mechanical properties, formability and forming limit diagrams for tailor-welded blanks produced by friction stir welding", J. Manuf. Proc., 31, 310-323. https://doi.org/10.1016/j.jmapro.2017.11.009.
  40. Habibi, M., Mohammadgholiha, M. and Safarpour, H. (2019a), "Wave propagation characteristics of the electrically GNP-reinforced nanocomposite cylindrical shell", J. Brazil. Soc. Mech. Sci. Eng., 41(5), 221. https://doi.org/10.1007/s40430-019-1715-x.
  41. Habibi, M., Mohammadi, A., Safarpour, H., Shavalipour, A. and Ghadiri, M. (2019b), "Wave propagation analysis of the laminated cylindrical nanoshell coupled with a piezoelectric actuator", Mech. Bas. Des. Struct. Mach., 49(5), 640-658. https://doi.org/10.1080/15397734.2019.1697932.
  42. Habibi, M., Taghdir, A. and Safarpour, H. (2019c), "Stability analysis of an electrically cylindrical nanoshell reinforced with graphene nanoplatelets", Compos. Part B: Eng., 175, 107125. https://doi.org/10.1016/j.compositesb.2019.107125.
  43. Hajime, O. and Kazumasa, O. (1996), "Self-compactable high-performance concrete in Japan", Spec. Publ., 159, 31-44. https://doi.org/10.14359/10052.
  44. He, X., Ding, J., Habibi, M., Safarpour, H. and Safarpour, M. (2021), "Non-polynomial framework for bending responses of the multi-scale hybrid laminated nanocomposite reinforced circular/annular plate", Thin Wall. Struct., 166, 108019. https://doi.org/10.1016/j.tws.2021.108019.
  45. Holmes, N., Browne, A. and Montague, C. (2014), "Acoustic properties of concrete panels with crumb rubber as a fine aggregate replacement", Constr. Build. Mater., 73, 195-204. https://doi.org/10.1016/j.conbuildmat.2014.09.107.
  46. Hou, F., Wu, S., Moradi, Z. and Shafiei, N. (2021), "The computational modeling for the static analysis of axially functionally graded micro-cylindrical imperfect beam applying the computer simulation", Eng. Comput., 38(Suppl 4), 3217-3235. https://doi.org/10.1007/s00366-021-01456-x.
  47. Hu, P., Moradi, Z., Ali, H.E. and Foong, L.K. (2022), "Metaheuristic-reinforced neural network for predicting the compressive strength of concrete", Smart Struct. Syst., 30(2), 195-207. https://doi.org/10.12989/sss.2022.30.2.195.
  48. Huang, X., Hao, H., Oslub, K., Habibi, M. and Tounsi, A. (2021), "Dynamic stability/instability simulation of the rotary size-dependent functionally graded microsystem", Eng. Comput., 1-17. https://doi.org/10.1007/s00366-021-01399-3.
  49. Huang, X., Zhang, Y., Moradi, Z. and Shafiei, N. (2022), "Computer simulation via a couple of homotopy perturbation methods and the generalized differential quadrature method for nonlinear vibration of functionally graded non-uniform microtube", Eng. Comput., 38(Suppl 3), 2481-2498. https://doi.org/10.1007/s00366-021-01395-7.
  50. Huang, Y., Huang, J., Zhang, W. and Liu, X. (2023), "Experimental and numerical study of hooked-end steel fiber-reinforced concrete based on the meso- and macro-models", Compos. Struct., 309, 116750. https://doi.org/10.1016/j.compstruct.2023.116750.
  51. Jia, S., Dai, Z., Zhou, Z., Ling, H., Yang, Z., Qi, L., Wang, Z., Zhang, X., Thanh, H.V. and Soltanian, M.R. (2023), "Upscaling dispersivity for conservative solute transport in naturally fractured media", Water Res., 235, 119844. https://doi.org/10.1016/j.watres.2023.119844.
  52. Jian, S., Cao, Y., Feng, W., Yin, G., Zhao, Y., Lai, Y., Zhang, T., Ling, X., Wu, H., Bi, H. and Dong, Y. (2022), "Recent progress in solid polymer electrolytes with various dimensional fillers: A review", Mater. Today Sustain., 20, 100224. https://doi.org/10.1016/j.mtsust.2022.100224.
  53. Jin, X., Moradi, Z. and Rashidi, R. (2023), "Optimal operation of distributed generations in four-wire unbalanced distribution systems considering different models of loads", Int. Trans. Elec. Energy Syst., 2023, Article ID 8763116. https://doi.org/10.1155/2023/8763116.
  54. Kim, H.K. and Lee, H.K. (2010), "Influence of cement flow and aggregate type on the mechanical and acoustic characteristics of porous concrete", Appl. Acoust., 71(7), 607-615. https://doi.org/10.1016/j.apacoust.2010.02.001.
  55. Kong, F., Dong, F., Duan, M., Habibi, M., Safarpour, H. and Tounsi, A. (2022), "On the vibrations of the Electrorheological sandwich disk with composite face sheets considering pre and post-yield regions", Thin Wall. Struct., 179, 109631. https://doi.org/10.1016/j.tws.2022.109631.
  56. Kumar, A., Sahu, N., Kumar Sahu, J. and Sahu, A. (2023), "Experimental investigation of paver block using polypropylene waste and industrial ashes", Mater. Today: Proc., 74, 808-814. https://doi.org/10.1016/j.matpr.2022.11.176.
  57. Lee, H.K., Kim, H.K. and Hwang, E.A. (2010), "Utilization of power plant bottom ash as aggregates in fiber-reinforced cellular concrete", Waste Manage., 30(2), 274-284. https://doi.org/10.1016/j.wasman.2009.09.043.
  58. Li, J., Tang, F. and Habibi, M. (2020a), "Bi-directional thermal buckling and resonance frequency characteristics of a GNPreinforced composite nanostructure", Eng. Comput., 1-22. https://doi.org/10.1007/s00366-020-01110-y.
  59. Li, Y., Li, S., Guo, K., Fang, X. and Habibi, M. (2020b), "On the modeling of bending responses of graphene-reinforced higher order annular plate via two-dimensional continuum mechanics approach", Eng. Comput., 1-22. https://doi.org/10.1007/s00366-020-01166-w.
  60. Liu, H., Chen, Z., Liu, Y., Chen, Y., Du, Y. and Zhou, F. (2023), "Interfacial debonding detection for CFST structures using an ultrasonic phased array: Application to the Shenzhen SEG building", Mech. Syst. Signal Pr., 192, 110214. https://doi.org/10.1016/j.ymssp.2023.110214.
  61. Liu, H., Shen, S., Oslub, K., Habibi, M. and Safarpour, H. (2021a), "Amplitude motion and frequency simulation of a composite viscoelastic microsystem within modified couple stress elasticity", Eng. Comput., 1-15. https://doi.org/10.1007/s00366-021-01316-8.
  62. Liu, H., Zhao, Y., Pishbin, M., Habibi, M., Bashir, M. and Issakhov, A. (2021b), "A comprehensive mathematical simulation of the composite size-dependent rotary 3D microsystem via two-dimensional generalized differential quadrature method", Eng. Comput., 1-16. https://doi.org/10.1007/s00366-021-01419-2.
  63. Liu, Q.F., Hu, Z., Wang, X.E., Zhao, H., Qian, K., Li, L.J. and Meng, Z. (2022a), "Numerical study on cracking and its effect on chloride transport in concrete subjected to external load", Constr. Build. Mater., 325, 126797. https://doi.org/10.1016/j.conbuildmat.2022.126797.
  64. Liu, S., Niu, B., Zong, G., Zhao, X. and Xu, N. (2022b), "Adaptive fixed-time hierarchical sliding mode control for switched under-actuated systems with dead-zone constraints via event-triggered strategy", Appl. Math. Comput., 435, 127441. https://doi.org/10.1016/j.amc.2022.127441.
  65. Liu, Y., Wang, W., He, T., Moradi, Z. and Larco Benitez, M.A. (2021c), "On the modelling of the vibration behaviors via discrete singular convolution method for a high-order sector annular system", Eng. Comput., 38(Suppl 4), 3631-3653. https://doi.org/10.1007/s00366-021-01454-z.
  66. Liu, Z., Su, S., Xi, D. and Habibi, M. (2020a), "Vibrational responses of a MHC viscoelastic thick annular plate in thermal environment using GDQ method", Mech. Bas. Des. Struct. Mach., 50(8), 2688-2713. https://doi.org/10.1080/15397734.2020.1784201.
  67. Liu, Z., Wu, X., Yu, M. and Habibi, M. (2020b), "Large-amplitude dynamical behavior of multilayer graphene platelets reinforced nanocomposite annular plate under thermo-mechanical loadings", Mech. Bas. Des. Struct. Mach., 50(11), 3722-3746. https://doi.org/10.1080/15397734.2020.1815544.
  68. Luo, J., Song, J., Moradi, Z., Safa, M. and Khadimallah, M.A. (2022a), "Effect of simultaneous compressive and inertia loads on the bifurcation stability of shear deformable functionally graded annular fabrications reinforced with graphenes", Eur. J. Mech.-A/Solid., 94, 104581. https://doi.org/10.1016/j.euromechsol.2022.104581.
  69. Luo, J., Wu, S., Hou, S., Moradi, Z., Habibi, M. and Khadimallah, M.A. (2022b), "Thermally nonlinear thermoelasticity of a one-dimensional finite domain based on the finite strain concept", Eur. J. Mech.-A/Solid., 96, 104726. https://doi.org/10.1016/j.euromechsol.2022.104726.
  70. Milanese, C., Cavedon, V., Corte, S. and Agostini, T. (2017), "The effects of two different correction strategies on the snatch technique in weightlifting", J. Sport. Sci., 35(5), 476-483. https://doi.org/10.1080/02640414.2016.1172727.
  71. Momeen Ul Islam, M., Li, J., Roychand, R. and Saberian, M. (2023), "Investigation of durability properties for structural lightweight concrete with discarded vehicle tire rubbers: A study for the complete replacement of conventional coarse aggregates", Constr. Build. Mater., 369, 130634. https://doi.org/10.1016/j.conbuildmat.2023.130634.
  72. Moradi, Z., Ebrahimi, F. and Davoudi, M. (2022), "Coupled Newmark beta technique and GDQ method for energy harvesting and vibration control of the piezoelectric MEMS/NEMS subjected to a blast load", Eng. Anal. Bound. Elem., 144, 492-506. https://doi.org/10.1016/j.enganabound.2022.08.021.
  73. Mousavi, S.M., Shafiei, N. and Dadvand, A. (2017), "Numerical simulation of subsonic turbulent flow over NACA0012 airfoil: evaluation of turbulence models", Sigma J. Eng. Nat. Sci., 35(1), 133-155.
  74. Neithalath, N., Weiss, J. and Olek, J. (2006), "Characterizing enhanced porosity concrete using electrical impedance to predict acoustic and hydraulic performance", Cement Concrete Res., 36(11), 2074-2085. https://doi.org/10.1016/j.cemconres.2006.09.001.
  75. Omidi, S., Oskooee, M.B. and Shafiei, N. (2013), "Finite element analysis of an ultra-fine grained Titanium dental implant covered by different thicknesses of hydroxyapatite layer", Ind. J. Dentist., 4(1), 1-4. https://doi.org/10.1016/j.ijd.2012.10.002.
  76. Park, S.B., Seo, D.S. and Lee, J. (2005), "Studies on the sound absorption characteristics of porous concrete based on the content of recycled aggregate and target void ratio", Cement Concrete Res., 35(9), 1846-1854. https://doi.org/10.1016/j.cemconres.2004.12.009.
  77. Peng, S., Habibi, M. and Pourjabari, A. (2023), "Generalized differential quadrature element solution, swarm, and GA optimization technique to obtain the optimum frequency of the laminated rotary nanostructure", Eng. Anal. Bound. Elem., 151, 101-114. https://doi.org/10.1016/j.enganabound.2023.02.052.
  78. Pourjabari, A., Hajilak, Z.E., Mohammadi, A., Habibi, M. and Safarpour, H. (2019), "Effect of porosity on free and forced vibration characteristics of the GPL reinforcement composite nanostructures", Comput. Math. Appl., 77(10), 2608-2626. https://doi.org/10.1016/j.camwa.2018.12.041.
  79. Ruslan, I., Ruslan, B. and Evgenij, K. (2022), "The effect of metal and polypropylene fiber on technological and physical mechanical properties of activated cement compositions", Case Stud. Constr. Mater., 16, e00882. https://doi.org/10.1016/j.cscm.2022.e00882.
  80. Sabzevari, F., Amelirad, O., Moradi, Z. and Habibi, M. (2023), "Artificial intelligence evaluation of COVID-19 restrictions and speech therapy effects on the autistic children's behavior", Scientif. Report., 13(1), 4312. https://doi.org/10.1038/s41598-022-25902-y.
  81. Safarpour, H., Hajilak, Z.E. and Habibi, M. (2019), "A size-dependent exact theory for thermal buckling, free and forced vibration analysis of temperature dependent FG multilayer GPLRC composite nanostructures restring on elastic foundation", Int. J. Mech. Mater. Des., 15(3), 569-583. https://doi.org/10.1007/s10999-018-9431-8.
  82. Shafiei, N., Ghadiri, M., Makvandi, H. and Hosseini, S.A. (2017), "Vibration analysis of Nano-Rotor's Blade applying Eringen nonlocal elasticity and generalized differential quadrature method", Appl. Math. Model., 43, 191-206. https://doi.org/10.1016/j.apm.2016.10.061.
  83. Shafiei, N., Hamisi, M. and Ghadiri, M. (2020), "Vibration analysis of rotary tapered axially functionally graded Timoshenko nanobeam in thermal environment", J. Solid Mech., 12(1), 16-32. https://doi.org/10.22034/jsm.2019.563759.1273.
  84. Shafiei, N., Kazemi, M. and Ghadiri, M. (2016), "Nonlinear vibration behavior of a rotating nanobeam under thermal stress using Eringen's nonlocal elasticity and DQM", Appl. Phys. A, 122(8), 728. https://doi.org/10.1007/s00339-016-0245-y.
  85. Shahabinejad, E., Shafiei, N. and Ghadiri, M. (2018), "Influence of temperature change on modal analysis of rotary functionally graded nano-beam in thermal environment", J. Solid Mech., 10(4), 779-803.
  86. Shao, Y., Zhao, Y., Gao, J. and Habibi, M. (2021), "Energy absorption of the strengthened viscoelastic multi-curved composite panel under friction force", Arch. Civil Mech. Eng., 21(4), 1-29. https://doi.org/10.1007/s43452-021-00279-3.
  87. Shen, D., Liu, C., Luo, Y., Shao, H., Zhou, X. and Bai, S. (2023), "Early-age autogenous shrinkage, tensile creep, and restrained cracking behavior of ultra-high-performance concrete incorporating polypropylene fibers", Cement Concrete Compos., 138, 104948. https://doi.org/10.1016/j.cemconcomp.2023.104948.
  88. Shen, D., Liu, X., Li, Q., Sun, L. and Wang, W. (2019), "Early-age behavior and cracking resistance of high-strength concrete reinforced with Dramix 3D steel fiber", Constr. Build. Mater., 196, 307-316. https://doi.org/10.1016/j.conbuildmat.2018.10.125.
  89. Shen, D., Liu, X., Zeng, X., Zhao, X. and Jiang, G. (2020), "Effect of polypropylene plastic fibers length on cracking resistance of high performance concrete at early age", Constr. Build. Mater., 244, 117874. https://doi.org/10.1016/j.conbuildmat.2019.117874.
  90. Shen, W., Wu, M., Zhang, B., Xu, G., Cai, J., Xiong, X. and Zhao, D. (2021), "Coarse aggregate effectiveness in concrete: Quantitative models study on paste thickness, mortar thickness and compressive strength", Constr. Build. Mater., 289, 123171. https://doi.org/10.1016/j.conbuildmat.2021.123171.
  91. Sheng, C., He, G., Hu, Z., Chou, C., Shi, J., Li, J., Meng, Q., Ning, X., Wang, L. and Ning, F. (2021), "Yarn on yarn abrasion failure mechanism of ultrahigh molecular weight polyethylene fiber", J. Eng. Fib. Fabric., 16, 15589250211052766. https://doi.org/10.1177/15589250211052766.
  92. Shin, T.Y. and Kim, J.H. (2022), "First step in modeling the flow table test to characterize the rheology of normally vibrated concrete", Cement Concrete Res., 152, 106678. https://doi.org/10.1016/j.cemconres.2021.106678.
  93. Shivanian, E., Ghadiri, M. and Shafiei, N. (2017), "Influence of size effect on flapwise vibration behavior of rotary microbeam and its analysis through spectral meshless radial point interpolation", Appl. Phys. A, 123(5), 329. https://doi.org/10.1007/s00339-017-0955-9.
  94. Waheed, A., Baig, U., Matin, A., Jillani, S.M.S., Qasem, N.A.A. and Aljundi, I.H. (2023), "Synthesis of co-polyamide reverse osmosis membrane constituting a linear aliphatic triamine and m-phenylenediamine for enhanced desalination performance", Desalin., 549, 116311. https://doi.org/10.1016/j.desal.2022.116311.
  95. Wang, M., Yang, M., Fang, Z., Wang, M. and Wu, Q. (2023a), "A practical feeder planning model for urban distribution system", IEEE Trans. Power Syst., 38(2), 1297-1308. https://doi.org/10.1109/tpwrs.2022.3170933.
  96. Wang, M., Yang, X. and Wang, W. (2022a), "Establishing a 3D aggregates database from X-ray CT scans of bulk concrete", Constr. Build. Mater., 315, 125740. https://doi.org/10.1016/j.conbuildmat.2021.125740.
  97. Wang, P., Gao, Z., Pan, F., Moradi, Z., Mahmoudi, T. and Khadimallah, M.A. (2022b), "A couple of GDQM and iteration techniques for the linear and nonlinear buckling of bi-directional functionally graded nanotubes based on the nonlocal strain gradient theory and high-order beam theory", Eng. Anal. Bound. Elem., 143, 124-136. https://doi.org/10.1016/j.enganabound.2022.06.007.
  98. Wang, X., Wu, S., Yin, J., Moradi, Z., Safa, M. and Khadimallah, M.A. (2023b), "On the electromechanical energy absorption of the reinforced composites piezoelectric MEMS via Adaptive neuro-fuzzy inference system and MCS theory", Compos. Struct., 303, 116246. https://doi.org/10.1016/j.compstruct.2022.116246.
  99. Wang, Y., Yang, J., Moradi, Z., Safa, M. and Khadimallah, M.A. (2022c), "Nonlinear dynamic analysis of thermally deformed beams subjected to uniform loading resting on nonlinear viscoelastic foundation", Eur. J. Mech.-A/Solid., 95, 104638. https://doi.org/10.1016/j.euromechsol.2022.104638.
  100. Wang, Z., Shui, Z., Sun, T., Li, X. and Zhang, M. (2022d), "Recycling utilization of phosphogypsum in eco excess-sulphate cement: Synergistic effects of metakaolin and slag additives on hydration, strength and microstructure", J. Clean. Prod., 358, 131901. https://doi.org/10.1016/j.jclepro.2022.131901.
  101. Wang, Z., Yu, S., Xiao, Z. and Habibi, M. (2020), "Frequency and buckling responses of a high-speed rotating fiber metal laminated cantilevered microdisk", Mech. Adv. Mater. Struct., 29(10), 1475-1488. https://doi.org/10.1080/15376494.2020.1824284.
  102. Wu, J. and Habibi, M. (2021), "Dynamic simulation of the ultra-fast-rotating sandwich cantilever disk via finite element and semi-numerical methods", Eng. Comput., 38(Suppl 5), 4127-4143. https://doi.org/10.1007/s00366-021-01396-6.
  103. Xi, M., Liu, Z., Sheng, R., Zhu, J., Guo, Y., Ding, J., Wang, X., Zhang, Y., Wang, L., Sun, Z., Zhang, W., Wang, J. and Huang, Y. (2023), "A novel solvent system of polyamides achieves new application in ZIBs by aggregation induced Lewis acid-base centers", Chem. Eng. J., 461, 141987. https://doi.org/10.1016/j.cej.2023.141987.
  104. Xiong, Q.M., Chen, Z., Huang, J.T., Zhang, M., Song, H., Hou, X.F., Li, X.B. and Feng, Z.J. (2020), "Preparation, structure and mechanical properties of Sialon ceramics by transition metal-catalyzed nitriding reaction", Rare Metal., 39(5), 589-596. https://doi.org/10.1007/s12598-020-01385-6.
  105. Yang, C., Su, C., Hu, H., Habibi, M., Safarpour, H. and Khadimallah, M.A. (2023), "Performance optimization of photovoltaic and solar cells via a hybrid and efficient chimp algorithm", Solar Energy, 253, 343-359. https://doi.org/10.1016/j.solener.2023.02.036.
  106. Yang, N., Moradi, Z., Arvin, H., Muhsen, S. and Khadimallah, M.A. (2022a), "A study on small scale thermal dynamic instability of rotating GPL-reinforced microbeams under principal parametric resonance stimulation of axial and transversal modes regarding the proportional damping", Thin Wall. Struct., 180, 109806. https://doi.org/10.1016/j.tws.2022.109806.
  107. Yang, N., Moradi, Z., Khadimallah, M.A. and Arvin, H. (2022b), "Application of the Chebyshev-Ritz route in determination of the dynamic instability region boundary for rotating nanocomposite beams reinforced with graphene platelet subjected to a temperature increment", Eng. Anal. Bound. Elem., 139, 169-179. https://doi.org/10.1016/j.enganabound.2022.03.013.
  108. Yu, F., Guo, J., Liu, J., Cai, H. and Huang, Y. (2023), "A review of the pore structure of pervious concrete: Analyzing method, characterization parameters and the effect on performance", Constr. Build. Mater., 365, 129971. https://doi.org/10.1016/j.conbuildmat.2022.129971.
  109. Zare, R., Najaafi, N., Habibi, M., Ebrahimi, F. and Safarpour, H. (2020), "Influence of imperfection on the smart control frequency characteristics of a cylindrical sensor-actuator GPLRC cylindrical shell using a proportional-derivative smart controller", Smart Struct. Syst., 26(4), 469-480. https://doi.org/10.12989/sss.2020.26.4.469.
  110. Zeng, Q., Jike, N., Xu, C., Yang, R., Peng, Y., Wang, J., Gong, F., Zhang, M. and Zhao, Y. (2022), "Total recycling of low-quality urban-fringe construction and demolition waste towards the development of sustainable cement-free pervious concrete: The proof of concept", J. Clean. Prod., 352, 131464. https://doi.org/10.1016/j.jclepro.2022.131464.
  111. Zhang, H., Wang, H., Niu, B., Zhang, L. and Ahmad, A.M. (2021a), "Sliding-mode surface-based adaptive actor-critic optimal control for switched nonlinear systems with average dwell time", Inform. Sci., 580, 756-774. https://doi.org/10.1016/j.ins.2021.08.062.
  112. Zhang, L., Hu, Z., Huang, J., Chen, Z., Li, X., Feng, Z., Yang, H., Huang, S. and Luo, R. (2022a), "Experimental and DFT studies of flower-like Ni-doped Mo2C on carbon fiber paper: A highly efficient and robust HER electrocatalyst modulated by Ni(NO3)2 concentration", J. Adv. Ceram., 11(8), 1294-1306. https://doi.org/10.1007/s40145-022-0610-6.
  113. Zhang, P., Gao, Y., Moradi, Z., Ali, Y.A. and Khadimallah, M.A. (2022b), "A semi-analytical procedure for cross section effect on the buckling and dynamic stability of composite imperfect truncated conical microbeam", Steel Compos. Struct., 44(3), 357-374. https://doi.org/10.12989/scs.2022.44.3.371.
  114. Zhang, W., Kang, S., Huang, Y. and Liu, X. (2023a), "Behavior of reinforced concrete beams without stirrups and strengthened with basalt fiber-reinforced polymer sheets", J. Compos. Constr., 27(2), 04023007. https://doi.org/10.1061/jccof2.cceng-4082.
  115. Zhang, Y., Wang, H., Yang, Y., Xie, J., Deng, Q., Zou, W., Zhou, A. and Li, J. (2023b), "Polyacrylonitrile fibers network reinforced polymer electrolyte with Li-Sn alloy layer protected Li anode toward ultra-long cycle lifespan for room-temperature solid-state batteries", Chem. Eng. J., 461, 141993. https://doi.org/10.1016/j.cej.2023.141993.
  116. Zhang, Y., Wang, Z., Tazeddinova, D., Ebrahimi, F., Habibi, M. and Safarpour, H. (2021b), "Enhancing active vibration control performances in a smart rotary sandwich thick nanostructure conveying viscous fluid flow by a PD controller", Wave. Random Complex Media, 1-24. https://doi.org/10.1080/17455030.2021.1948627.
  117. Zhang, Z., Liang, G., Niu, Q., Wang, F., Chen, J., Zhao, B. and Ke, L. (2022c), "A Wiener degradation process with drift-based approach of determining target reliability index of concrete structures", Qualit. Reliab. Eng. Int., 38(7), 3710-3725. https://doi.org/10.1002/qre.3168.
  118. Zhao, H., Li, C., Fu, Y., Oyarhossein, M.A., Habibi, M. and Safarpour, H. (2023), "Quasi-static indentation, low-velocity impact, and resonance responses of the laminated double-curved panel considering various boundary conditions", Thin Wall. Struct., 183 110360. https://doi.org/10.1016/j.tws.2022.110360.
  119. Zheng, W., Liu, J., Oyarhossein, M.A., Safarpour, H. and Habibi, M. (2023), "Prediction of nth-order derivatives for vibration responses of a sandwich shell composed of a magnetorheological core and composite face layers", Eng. Anal. Bound. Elem., 146, 170-183. https://doi.org/10.1016/j.enganabound.2022.10.019.
  120. Zheng, Y., Jin, H., Jiang, C., Moradi, Z., Khadimallah, M.A. and Moayedi, H. (2022), "Analyzing behavior of circular concrete-filled steel tube column using improved fuzzy models", Steel Compos. Struct., 43(5), 625-637. https://doi.org/10.12989/scs.2022.43.5.625.
  121. Zhou, C., Zhao, Y., Zhang, J., Fang, Y. and Habibi, M. (2020), "Vibrational characteristics of multi-phase nanocomposite reinforced circular/annular system", Adv. Nano Res., 9(4), 295-307. https://doi.org/10.12989/anr.2020.9.4.295.
  122. Zhou, J., Moradi, Z., Safa, M. and Khadimallah, M.A. (2022), "Intelligent modeling to investigate the stability of a two-dimensional functionally graded porosity-dependent nanobeam", Comput. Concrete, 30(2), 85-97. https://doi.org/10.12989/cac.2022.30.2.085
  123. Zhu, L., Ren, H., Habibi, M., Mohammed, K.J. and Khadimallah, M.A. (2022), "Predicting the environmental economic dispatch problem for reducing waste nonrenewable materials via an innovative constraint multi-objective Chimp Optimization Algorithm", J. Clean. Prod., 132697. https://doi.org/10.1016/j.jclepro.2022.132697.
  124. Zhu, W., Gibbs, J.C. and Bartos, P.J.M. (2001), "Uniformity of in situ properties of self-compacting concrete in full-scale structural elements", Cement Concrete Compos., 23(1), 57-64. https://doi.org/10.1016/S0958-9465(00)00053-6.