과제정보
This study was supported by the National Research Foundation of Korea (NRF; Daejeon, Republic of Korea) funded by the Korea government (MSIT) (grant No. NRF-2021R1G1A1004716).
참고문헌
- Moraschini V, Poubel LA, Ferreira VF, Barboza ES. Evaluation of survival and success rates of dental implants reported in longitudinal studies with a follow-up period of at least 10 years: a systematic review. Int J Oral Maxillofac Surg 2015;44:377-88. https://doi.org/10.1016/j.ijom.2014.10.023
- Tey VH, Phillips R, Tan K. Patient-related outcome measures with implant therapy after 5 years. Clin Oral Implants Res 2017;28:683-8. https://doi.org/10.1111/clr.12862
- Lazzara RJ. Immediate implant placement into extraction sites: surgical and restorative advantages. Int J Periodontics Restorative Dent 1989;9:332-43.
- Mainetti T, Lang NP, Bengazi F, Sbricoli L, Soto Cantero L, Botticelli D. Immediate loading of implants installed in a healed alveolar bony ridge or immediately after tooth extraction: an experimental study in dogs. Clin Oral Implants Res 2015;26:435-41. https://doi.org/10.1111/clr.12389
- Chrcanovic BR, Albrektsson T, Wennerberg A. Flapless versus conventional flapped dental implant surgery: a meta-analysis. PLoS One 2014;9:e100624.
- Hoffmann J, Westendorff C, Gomez-Roman G, Reinert S. Accuracy of navigation-guided socket drilling before implant installation compared to the conventional free-hand method in a synthetic edentulous lower jaw model. Clin Oral Implants Res 2005;16:609-14. https://doi.org/10.1111/j.1600-0501.2005.01153.x
- Hoffmann J, Westendorff C, Schneider M, Reinert S. Accuracy assessment of image-guided implant surgery: an experimental study. Int J Oral Maxillofac Implants 2005;20:382-6.
- Albrektsson T, Branemark PI, Hansson HA, Lindstrom J. Osseointegrated titanium implants. Requirements for ensuring a long-lasting, direct bone-to-implant anchorage in man. Acta Orthop Scand 1981;52:155-70. https://doi.org/10.3109/17453678108991776
- Tehemar SH. Factors affecting heat generation during implant site preparation: a review of biologic observations and future considerations. Int J Oral Maxillofac Implants 1999;14:127-36.
- Eriksson AR, Albrektsson T. Temperature threshold levels for heat-induced bone tissue injury: a vital-microscopic study in the rabbit. J Prosthet Dent 1983;50:101-7. https://doi.org/10.1016/0022-3913(83)90174-9
- Eriksson RA, Albrektsson T. The effect of heat on bone regeneration: an experimental study in the rabbit using the bone growth chamber. J Oral Maxillofac Surg 1984;42:705-11. https://doi.org/10.1016/0278-2391(84)90417-8
- Eriksson A, Albrektsson T, Grane B, McQueen D. Thermal injury to bone. A vital-microscopic description of heat effects. Int J Oral Surg 1982;11:115-21. https://doi.org/10.1016/S0300-9785(82)80020-3
- Oliveira N, Alaejos-Algarra F, Mareque-Bueno J, Ferres-Padro E, Hernandez-Alfaro F. Thermal changes and drill wear in bovine bone during implant site preparation. A comparative in vitro study: twisted stainless steel and ceramic drills. Clin Oral Implants Res 2012;23:963-9. https://doi.org/10.1111/j.1600-0501.2011.02248.x
- Scarano A, Piattelli A, Assenza B, Carinci F, Di Donato L, Romani GL, et al. Infrared thermographic evaluation of temperature modifications induced during implant site preparation with cylindrical versus conical drills. Clin Implant Dent Relat Res 2011;13:319-23. https://doi.org/10.1111/j.1708-8208.2009.00209.x
- Benington IC, Biagioni PA, Briggs J, Sheridan S, Lamey PJ. Thermal changes observed at implant sites during internal and external irrigation. Clin Oral Implants Res 2002;13:293-7. https://doi.org/10.1034/j.1600-0501.2002.130309.x
- Mohlhenrich SC, Abouridouane M, Heussen N, Modabber A, Klocke F, Holzle F. Influence of bone density and implant drill diameter on the resulting axial force and temperature development in implant burs and artificial bone: an in vitro study. Oral Maxillofac Surg 2016;20:135-42. https://doi.org/10.1007/s10006-015-0536-z
- Frosch L, Mukaddam K, Filippi A, Zitzmann NU, Kuhl S. Comparison of heat generation between guided and conventional implant surgery for single and sequential drilling protocols: an in vitro study. Clin Oral Implants Res 2019;30:121-30. https://doi.org/10.1111/clr.13398
- Gaspar J, Borrecho G, Oliveira P, Salvado F, Martins dos Santos J. Osteotomy at low-speed drilling without irrigation versus high-speed drilling with irrigation: an experimental study. Acta Med Port 2013;26:231-6.
- Waltenberger L, Wied S, Wolfart S, Tuna T. Effect of different dental implant drilling template designs on heat generation during osteotomy: an in vitro study. Clin Oral Implants Res 2022;33:53-64. https://doi.org/10.1111/clr.13864
- Sharawy M, Misch CE, Weller N, Tehemar S. Heat generation during implant drilling: the significance of motor speed. J Oral Maxillofac Surg 2002;60:1160-9. https://doi.org/10.1053/joms.2002.34992
- Kim SJ, Yoo J, Kim YS, Shin SW. Temperature change in pig rib bone during implant site preparation by low-speed drilling. J Appl Oral Sci 2010;18:522-7. https://doi.org/10.1590/S1678-77572010000500016
- Salomo-Coll O, Auriol-Muerza B, Lozano-Carrascal N, Hernandez-Alfaro F, Wang HL, Gargallo-Albiol J. Influence of bone density, drill diameter, drilling speed, and irrigation on temperature changes during implant osteotomies: an in vitro study. Clin Oral Investig 2021;25:1047-53. https://doi.org/10.1007/s00784-020-03398-y
- Anitua E, Carda C, Andia I. A novel drilling procedure and subsequent bone autograft preparation: a technical note. Int J Oral Maxillofac Implants 2007;22:138-45.
- Eriksson RA, Adell R. Temperatures during drilling for the placement of implants using the osseointegration technique. J Oral Maxillofac Surg 1986;44:4-7. https://doi.org/10.1016/0278-2391(86)90006-6
- Bulloch SE, Olsen RG, Bulloch B. Comparison of heat generation between internally guided (cannulated) single drill and traditional sequential drilling with and without a drill guide for dental implants. Int J Oral Maxillofac Implants 2012;27:1456-60.
- Jimbo R, Giro G, Marin C, Granato R, Suzuki M, Tovar N, et al. Simplified drilling technique does not decrease dental implant osseointegration: a preliminary report. J Periodontol 2013;84:1599-605. https://doi.org/10.1902/jop.2012.120565
- Oh JH, Fang Y, Jeong SM, Choi BH. The effect of low-speed drilling without irrigation on heat generation: an experimental study. J Korean Assoc Oral Maxillofac Surg 2016;42:9-12. https://doi.org/10.5125/jkaoms.2016.42.1.9
- Cordioli G, Majzoub Z. Heat generation during implant site preparation: an in vitro study. Int J Oral Maxillofac Implants 1997;12:186-93.
- Strbac GD, Giannis K, Unger E, Mittlbock M, Watzek G, Zechner W. A novel standardized bone model for thermal evaluation of bone osteotomies with various irrigation methods. Clin Oral Implants Res 2014;25:622-31. https://doi.org/10.1111/clr.12090
- Eriksson RA, Albrektsson T, Magnusson B. Assessment of bone viability after heat trauma. A histological, histochemical and vital microscopic study in the rabbit. Scand J Plast Reconstr Surg 1984;18:261-8.
- Mohlhenrich SC, Abouridouane M, Heussen N, Holzle F, Klocke F, Modabber A. Thermal evaluation by infrared measurement of implant site preparation between single and gradual drilling in artificial bone blocks of different densities. Int J Oral Maxillofac Surg 2016;45:1478-84. https://doi.org/10.1016/j.ijom.2016.05.020
- Jimbo R, Janal MN, Marin C, Giro G, Tovar N, Coelho PG. The effect of implant diameter on osseointegration utilizing simplified drilling protocols. Clin Oral Implants Res 2014;25:1295-300. https://doi.org/10.1111/clr.12268
- Delgado-Ruiz RA, Velasco Ortega E, Romanos GE, Gerhke S, Newen I, Calvo-Guirado JL. Slow drilling speeds for single-drill implant bed preparation. Experimental in vitro study. Clin Oral Investig 2018;22:349-59. https://doi.org/10.1007/s00784-017-2119-x