Acknowledgement
This work was supported by the Korea Institute of Energy Technology Evaluation and Planning(KETEP) and the Ministry of Trade, Industry & Energy(MOTIE) of the Republic of Korea (No. 20215810100020).
References
- Korea Occupational Safety & Health Agency, "KOSHA GUIDE D-65-2018: Technical Guidelines for Design and Installation of Protective Structures", 2018.
- T. R. Slawson, "Dynamic Shear Failure of Shallow-buried Flat-roofed Reinforced Concrete Structures Subjected to Blast Loading", Army Engineer Waterways Experiment Station Vicksburg Ms Structures Lab, pp. 7-10 1984.
- J. Xu, C. Wu and Z. Li, "Analysis of Direct Shear Failure Mode for RC Slabs under External Explosive Loading", International Journal of Impact Engineering, Vol. 69, pp. 136-148, 2014. https://doi.org/10.1016/j.ijimpeng.2014.02.018
- R. Yu, L. Chen, Q. Fang, H. Yan and G. Chen, "Generation of Pressure-impulse Diagrams for Failure Modes of RC Columns Subjected to Blast Loads", Engineering Failure Analysis, Vol. 100, pp. 520-535, 2019. https://doi.org/10.1016/j.engfailanal.2019.02.001
- J. M. Biggs, "Introduction to Structural Dynamics", McGraw-Hill College, pp. 1-314 1964.
- S. J. Lee, J. Y. Park, Y. H. Lee and H. S. Kim, "Experimental Analysis on the Criteria of the Explosion Damage for One-way RC Slabs", Journal of the Korean Society of Safety, Vol. 32, No. 6, pp.68-74, 2017.
- S. J. Lee, T. K. Oh, J. Y. Park and H. S. Kim, "The Study on the Optimal NDT Method for the Explosion Damage Analysis for One-way RC Slabs", Journal of the Korean Society of Safety, Vol. 32, No. 5, pp. 62-68, 2017.
- W. El-Dakhakhni, W. Mekky and S. Rezaei, "Validity of SDOF Models for Analyzing Two-way Reinforced Concrete Panels under Blast Loading", Journal of Performance of Constructed Facilities, Vol. 24, No. 4, pp. 311-325, 2010. https://doi.org/10.1061/(ASCE)CF.1943-5509.0000090
- US Army Corps of Engineers, "PDC TR 06-08: Single Degree of Freedom Structural Response Limits for Antiterrorism Design", 2006.
- T. Krauthammer, N. Bazeos and T. J. Holmquist, "Modified SDOF Analysis of RC Box-Type Structures", Journal of Structural Engineering, Vol. 112, No. 4, pp. 726-744, 1986. https://doi.org/10.1061/(ASCE)0733-9445(1986)112:4(726)
- US Department of the Army, "UFC 3-340-02: Structures to Resist the Effects of Accidental Explosions", 2008.
- US Army Corps of Engineers, "PDC TR 06-01: Methodology Manual for Single Degree of Freedom Blast Effects Design Spreadsheets (SBEDS)", 2008.
- J. H. Kee and J. Y. Park, "Simple PI Diagram for Structural Components based on Support Rotation Angle Criteria", Advances in Concrete Construction, Vol. 10, No. 6, pp. 509-514, 2020. https://doi.org/10.12989/ACC.2020.10.6.509
- Korean Agency for Technology and Standards, "KS D 3504:2021: Steel bars for Concrete Reinforcement", pp. 2, 2021.
- Korea Ministry of Land, Infrastructure and Transport, "Regulations on Structural Standards, etc. of Buildings", 2021.
- Korea Ministry of Land, Infrastructure and Transport, "KDS 14 20 00: Concrete wall design standards, 2022.