DOI QR코드

DOI QR Code

Rehabilitation with minimal increase in occlusal vertical dimension in a patient with excessive tooth wear and edge-to-edge bite

과도한 치아 마모와 절단교합을 보이는 환자에서 최소한의 수직 고경 증가를 통한 구강회복 증례

  • Hee-Young Kim (Department of Prosthodontics, Veterans Health Service Medical Center) ;
  • Seong-A Kim (Department of Prosthodontics, Veterans Health Service Medical Center) ;
  • Yong-Sang Lee (Department of Prosthodontics, Veterans Health Service Medical Center) ;
  • Keun-Woo Lee (Department of Prosthodontics, Veterans Health Service Medical Center) ;
  • Joo-Hyuk Bang (Department of Prosthodontics, Veterans Health Service Medical Center)
  • Received : 2022.10.03
  • Accepted : 2022.10.19
  • Published : 2023.04.30

Abstract

Although tooth wear is a normal process due to aging, severe tooth wear causes various complications such as increased tooth sensitivity, loss of tooth structure, and pulp complications. In the treatment of patients with excessive tooth wear, the evaluation of loss of vertical occlusal dimension should be prioritized. If it is necessary to increase the vertical dimension to secure the restoration space, it is important to establish a treatment plan with the comprehensive analysis and determine the minimum vertical dimension elevation. In this case, 66-year-old male patient with severe worn dentition wanted to restore masticatory function and improve esthetic restoration. In order to determine the appropriate vertical dimension of the patient, we evaluated oral examination, radiographic examination, and diagnostic cast examination, and performed rehabilitation with minimum vertical dimension elevation. As a result of observation for 8 months, the definitive prosthesis was completed with contact of all teeth in centric occlusion, and proper anterior/posterior guidance. Through the above process, satisfactory aesthetic and functional outcomes were obtained.

치아의 마모는 노화로 인한 정상적인 과정이지만, 과도한 마모는 치아 구조물 상실, 치아민감성 증가, 치수 합병증 등 여러 합병증을 야기한다. 과도한 치아 마모 환자의 치료는 수직교합고경 상실 여부의 평가가 우선되어야 하는데, 보철수복공간이 부족할 경우 수직교합고경 증가가 필요할 수 있고, 종합적인 분석을 통해 치료계획을 수립하고 최소한의 증가량을 결정해야 한다. 본 증례는 66세 남환으로 심한 치아의 마모로 인한 저작기능 회복 및 심미적인 회복을 위해 내원하였다. 구강 검사, 방사선 검사, 진단 모형 검사 등을 통해 수직교합고경을 평가하고, 최소한의 수직교합고경 증가를 동반한 보철수복을 계획하였다. 8개월 간의 관찰 결과 중심위에서 치아의 균일한 접촉, 적절한 전방 및 측방 유도를 부여하였고, 환자의 기능적 문제를 해결하고 심미적 요구사항을 만족시킬 수 있었기에 이를 보고하는 바이다.

Keywords

References

  1. Muts EJ, van Pelt H, Edelhoff D, Krejci I, Cune M. Tooth wear: a systematic review of treatment options. J Prosthet Dent 2014;112:752-9. https://doi.org/10.1016/j.prosdent.2014.01.018
  2. Johansson A, Omar R. Identification and management of tooth wear. Int J Prosthodont 1994;7:506-16.
  3. Turner KA, Missirlian DM. Restoration of the extremely worn dentition. J Prosthet Dent 1984;52:467-74. https://doi.org/10.1016/0022-3913(84)90326-3
  4. Dawson PE. Functional occlusion: from TMJ to smile design. St. Louis; Mosby Elsevier; 2007. p. 114-23.
  5. Abduo J. Safety of increasing vertical dimension of occlusion: a systematic review. Quintessence Int 2012;43:369-80.
  6. Dahl BL, Krogstad O. Long-term observations of an increased occlusal face height obtained by a combined orthodontic/prosthetic approach. J Oral Rehabil 1985;12:173-6. https://doi.org/10.1111/j.1365-2842.1985.tb00632.x
  7. Ormianer Z, Palty A. Altered vertical dimension of occlusion: a comparative retrospective pilot study of tooth- and implant-supported restorations. Int J Oral Maxillofac Implants 2009;24:497-501.
  8. Gross MD, Ormianer Z. A preliminary study on the effect of occlusal vertical dimension increase on mandibular postural rest position. Int J Prosthodont 1994;7:216-26.
  9. Tiwari B, Ladha K, Lalit A, Dwarakananda Naik B. Occlusal concepts in full mouth rehabilitation: an overview. J Indian Prosthodont Soc 2014;14:344-51. https://doi.org/10.1007/s13191-014-0374-y
  10. Willis FM. Features of the face involved in full denture prosthesis. Dent Cosmos 1935;77:851-4.
  11. Park JH, Jeong CM, Jeon YC, Lim JS. A study on the occlusal plane and the vertical dimension in Korean adults with natural dentition. J Korean Acad Prosthodont 2005;43:41-51.
  12. Song JW, Leesungbok R, Park SJ, Chang SH, Ahn SJ, Lee SW. Analysis of crown size and morphology, and gingival shape in the maxillary anterior dentition in Korean young adults. J Adv Prosthodont 2017;9:315-20. https://doi.org/10.4047/jap.2017.9.4.315
  13. Carlsson GE, Ingervall B, Kocak G. Effect of increasing vertical dimension on the masticatory system in subjects with natural teeth. J Prosthet Dent 1979;41:284-9. https://doi.org/10.1016/0022-3913(79)90008-8
  14. Murphy T. Compensatory mechanisms in facial height adjustment to functional tooth attrition. Aust Dent J 1959;4:312-23. https://doi.org/10.1111/j.1834-7819.1959.tb03727.x
  15. Tench RW. Dangers in dental reconstruction in-volving increase of the vertical dimension of the lower third of the human face. J Am Dent Assoc Dent Cosmos 1938;25:566-70. https://doi.org/10.14219/jada.archive.1938.0086
  16. Monteith B. The role of the free-way space in the generation of muscle pain among denture-wearers. J Oral Rehabil 1984;11:483-98. https://doi.org/10.1111/j.1365-2842.1984.tb00601.x
  17. Abduo J, Lyons K. Clinical considerations for increasing occlusal vertical dimension: a review. Aust Dent J 2012;57:2-10. https://doi.org/10.1111/j.1834-7819.2011.01640.x
  18. Schuyler CH. An evaluation of incisal guidance and its influence in restorative dentistry. J Prosthet Dent 1959;9:374-8. https://doi.org/10.1016/0022-3913(59)90066-6
  19. Donegan SJ. Knap FJ. A study of anterior guidance. J Prosthodont 1995;4:226-32. https://doi.org/10.1111/j.1532-849X.1995.tb00346.x
  20. Kaidonis JA. Tooth wear: the view of the anthropologist. Clin Oral Investig 2008;12:S21-6. https://doi.org/10.1007/s00784-007-0183-3
  21. Zero DT. Etiology of dental erosion-extrinsic factors. Eur J Oral Sci 1996;104:162-77. https://doi.org/10.1111/j.1600-0722.1996.tb00065.x
  22. Constantino PJ, Lee JJ, Chai H, Zipfel B, Ziscovici C, Lawn BR, Lucas PW. Tooth chipping can reveal the diet and bite forces of fossil hominins. Biol Lett 2010;6:826-9. https://doi.org/10.1098/rsbl.2010.0304
  23. Fannin LD, Guatelli-Steinberg D, Geissler E, Morse PE, Constantino PJ, Mc-Graw WS. Enamel chipping in Tai Forest cercopithecids: Implications for diet reconstruction in paleoanthropological contexts. J Hum Evol 2020;141:102742.
  24. Schwartz GT. Taxonomic and functional aspects of the patterning of enamel thickness distribution in extant large-bodied hominoids. Am J Phys Anthropol 2000;111:221-44. https://doi.org/10.1002/(SICI)1096-8644(200002)111:2<221::AID-AJPA8>3.0.CO;2-G
  25. Towle I, Loch C, Irish JD, Veneziano A, Ito T. Chipping and wear patterns in extant primate and fossil hominin molars: 'Functional' cusps are associated with extensive wear but low levels of fracture. J Hum Evol 2021;151:102923.